The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.

Bits stay cool during grinding so they won’t mar or discolor stainless steel.

The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.

Set contains an assortment of tools for grinding, sanding, and cutting on small surface areas.

Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.

These air-filled wheels absorb shock to eliminate noise and cushion your load.

Our most popular casters for carts and dollies.

Both the wheel bearings and the swivel bearings are protected to lengthen the life of these casters.

The solid rubber wheels on these casters cushion as well as pneumatic wheels but won't go flat.

Popular in hospitals and laboratories, our quietest casters have a soft, cushioning rubber tread with a hard polypropylene core for strength.

Minimize shock to your load on bumpy surfaces with these spring-loaded casters.

A tough, puncture-resistant tread surrounds a nonpressurized pocket of air so these wheels absorb shock to cushion like pneumatic wheels but won't go flat.

Metal wheel guards keep dust and debris from restricting motion.

Low mount heights and small mounting plates make these a good choice where space is limited.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

The legs on these casters are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

Made from a special blend of rubber, the wheels on these casters roll easily over smooth and rough surfaces.

Used on hotel bellman's carts, these casters have a compact frame for use on small appliances and furniture.

These casters match many common carts and dollies.

Able to turn on a dime, these casters have two separate swivels in the mounting plate to give vehicles the tightest turning radius. They are often used on automated guided vehicles.

Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.

A shield on the swivel keeps out contaminants for extended service life.

Forged steel construction gives these casters the strength for demanding applications.

The lightweight wheels on these casters are easy to get rolling.

Withstanding temperatures up to 1600° F, these are the most heat-resistant casters we offer.

These are good general purpose casters for moderately heavy loads.

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

The steel frame has a black powder-coated finish to blend in with your equipment.

Used on hotel bellman's carts, these casters have a compact frame for small appliances and furniture.

These are good general purpose casters for moderately heavy loads.

Stable and easy to turn, these casters have the lowest mount heights in their capacity range.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

Mount these casters to the corners of carts, equipment, and angle iron.

Stable and easy to turn, these casters have some of the lowest mount heights in their capacity range.

The lightweight wheels on these casters provide impact resistance on smooth surfaces. They are the most economical wheel option. Their 304 stainless steel frame is corrosion resistant.

The most durable plastic wheel, the nylon wheels on these casters are impact and wear resistant. They work well on smooth surfaces. Their 304 stainless steel frame is corrosion resistant.

Our most corrosion-resistant casters have a 316 stainless steel frame and stainless steel wheel bearings that stand up to frequent washdowns. Their soft rubber wheels absorb shock and provide good traction on rough surfaces.

These are good general purpose casters designed for heavy loads.

With some of the highest capacities in their capacity range, these casters have a kingpinless swivel design for impact resistance and smooth swiveling.

Often found on automated guided vehicles, the axle on this caster pivots up to nine degrees to prevent the wheel from losing contact with the ground during turns or when used on uneven surfaces.

The springs in these casters take on bumpy surfaces and obstructions while preventing shock to the load.

These economical casters are designed for moderately heavy loads.

More durable than other high-capacity casters, these withstand the stress of sudden impact.

Treads are treated to protect the wheels from degradation. They meet NSF/ANSI 2 for food equipment use.

More durable than other high-capacity casters, these withstand the stress of sudden impact.

These are good general purpose casters designed for heavy loads.

Forged steel construction gives these casters the strength for demanding applications.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 350° F.

More durable than other high-capacity casters, these withstand the stress of sudden impact.

The legs are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

A forged-steel frame and air-filled tire absorbs shock to prevent damage to your load.

A thick rubber tread on iron wheels absorbs shock to protect your load.

These highly maneuverable casters let you start rolling quickly and turn easily.

These are good general purpose casters designed for heavy loads.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.

Forged steel construction gives these casters the strength for demanding applications.

At the top of their capacity range, these casters have a kingpinless swivel design for impact resistance and smooth swiveling.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

Withstanding temperatures up to 1600° F, these are the most heat-resistant casters we offer.

Precision steel ball bearings result in smoother rolling than other high-capacity corrosion-resistant casters. They have a stainless steel frame for good corrosion resistance. Their polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber.

Able to withstand temperatures up to 350° F, these casters also have a 304 stainless steel frame for corrosion resistance. Their glass-filled nylon wheels are impact and wear resistant.

The wheels on these casters are made of a special rubber that is impact and chemical resistant and absorbs shock for smooth rolling over rough surfaces. They have a stainless steel frame and sealed bearings for corrosion resistance.

Forged steel construction holds up in demanding applications.

Forged steel construction gives these casters the strength for demanding applications.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

Pair these swivel casters that have a kingpinless raceway with ball bearings for good impact resistance, smooth swiveling, and extended service life, with the rigid casters to fit your needs.

Move your heaviest loads with the largest casters we offer. Their forged steel construction holds up in demanding applications.

Forged steel construction holds up in demanding applications.

Not only do these casters offer some of the highest capacities, they also withstand the stress of sudden impact.

With the smallest mounting plates and the lowest mounting heights of extra-high-capacity casters, these are a strong choice for tight spaces.

Pair these swivel casters that have a kingpinless raceway with ball bearings for good impact resistance, smooth swiveling, and extended service life with the matching rigid casters to fit your needs.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.