Filter by
Military Specification
System of Measurement
Rounded Head Style
Drive Style
Material
Certification
Fastener Head Type
Threading
Thread Type
Performance
Sold As
Export Control Classification Number (ECCN)
DFARS Specialty Metals
REACH
RoHS
Tip Type
Hardness
Locking Type
Wire-Locking Stainless Steel Fillister Head Slotted Screws
 |  |
The best vibration resistance of our rounded head screws. Secure a wire through the hole in the head of these screws to lock them in place. Unlike screws with threadlocker or lock washers, they handle more vibration and movement, but they're more difficult to install. Made of stainless steel, they won't rust or corrode when exposed to moisture and chemicals. With a deeper drive than others, fillister heads reduce the likelihood that basic slotted drivers slip as you hand-tighten them.
Length is measured from under the head.
18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.
Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.
Stainless Steel Wire—Thread this stainless steel wire through screws to lock them together.
Screws | Stainless Steel Wire | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Head | ||||||||||||||
Lg. | Dia. | Ht. | Hole Dia. | Threading | Tensile Strength, psi | Mil. Spec. | Certificate Type | Pkg. Qty. | Pkg. | Each | ||||
18-8 Stainless Steel | ||||||||||||||
2-56 | ||||||||||||||
| 1/4" | 0.14" | 0.083" | 0.031" | Fully Threaded | 80,000 | AN500AD2-4, Fed. Spec. QQ-P-35, MS35275-203, NASM35275 | Material Certificate | 10 | 90350A110 | 000000 | 8860K11 | 000000 | ||
| 5/16" | 0.14" | 0.083" | 0.031" | Fully Threaded | 80,000 | AN500AD2-5, Fed. Spec. QQ-P-35, MS35275-204, NASM35275 | Material Certificate | 10 | 90350A115 | 00000 | 8860K11 | 00000 | ||
| 3/8" | 0.14" | 0.083" | 0.031" | Fully Threaded | 80,000 | AN500AD2-6, Fed. Spec. QQ-P-35, MS35275-205, NASM35275 | Material Certificate | 10 | 90350A120 | 00000 | 8860K11 | 00000 | ||
| 1/2" | 0.14" | 0.083" | 0.031" | Fully Threaded | 80,000 | AN500AD2-8, Fed. Spec. QQ-P-35, MS35275-207, NASM35275 | — | 10 | 90350A125 | 0000 | 8860K11 | 00000 | ||
4-40 | ||||||||||||||
| 3/16" | 0.183" | 0.107" | 0.037" | Fully Threaded | 80,000 | AN500AD4-3, Fed. Spec. QQ-P-35, MS35275-212, NASM35275 | — | 5 | 90350A150 | 0000 | 8860K12 | 0000 | ||
| 1/4" | 0.183" | 0.107" | 0.037" | Fully Threaded | 80,000 | AN500AD4-4, Fed. Spec. QQ-P-35, MS35275-213, NASM35275 | — | 10 | 90350A155 | 0000 | 8860K12 | 0000 | ||
| 5/16" | 0.183" | 0.107" | 0.037" | Fully Threaded | 80,000 | AN500AD4-5, Fed. Spec. QQ-P-35, MS35275-214, NASM35275 | — | 10 | 90350A160 | 0000 | 8860K12 | 0000 | ||
| 3/8" | 0.183" | 0.107" | 0.037" | Fully Threaded | 80,000 | AN500AD4-6, Fed. Spec. QQ-P-35, MS35275-215, NASM35275 | Material Certificate | 10 | 90350A165 | 00000 | 8860K12 | 0000 | ||
| 1/2" | 0.183" | 0.107" | 0.037" | Fully Threaded | 80,000 | AN500AD4-8, Fed. Spec. QQ-P-35, MS35275-217, NASM35275 | — | 10 | 90350A170 | 0000 | 8860K12 | 0000 | ||
| 3/4" | 0.183" | 0.107" | 0.035" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-219 | — | 5 | 90350A311 | 00000 | 8860K12 | 0000 | ||
6-32 | ||||||||||||||
| 3/16" | 0.226" | 0.132" | 0.046" | Fully Threaded | 80,000 | AN500AD6-3, Fed. Spec. QQ-P-35, MS35275-225, NASM35275 | Material Certificate | 5 | 90350A205 | 00000 | 8860K13 | 0000 | ||
| 1/4" | 0.226" | 0.132" | 0.046" | Fully Threaded | 80,000 | AN500AD6-4, Fed. Spec. QQ-P-35, MS35275-226, NASM35275 | Material Certificate | 10 | 90350A210 | 0000 | 8860K13 | 0000 | ||
| 5/16" | 0.226" | 0.132" | 0.046" | Fully Threaded | 80,000 | AN500AD6-5, Fed. Spec. QQ-P-35, MS35275-227, NASM35275 | — | 10 | 90350A215 | 0000 | 8860K13 | 0000 | ||
| 3/8" | 0.226" | 0.132" | 0.046" | Fully Threaded | 80,000 | AN500AD6-6, Fed. Spec. QQ-P-35, MS35275-228, NASM35275 | — | 10 | 90350A220 | 00000 | 8860K13 | 0000 | ||
| 1/2" | 0.226" | 0.132" | 0.046" | Fully Threaded | 80,000 | AN500AD6-8, Fed. Spec. QQ-P-35, MS35275-230, NASM35275 | Material Certificate | 10 | 90350A225 | 00000 | 8860K13 | 0000 | ||
| 3/4" | 0.226" | 0.132" | 0.046" | Fully Threaded | 80,000 | AN500AD6-12, Fed. Spec. QQ-P-35, MS35275-232, NASM35275 | — | 5 | 90350A230 | 0000 | 8860K13 | 0000 | ||
| 1" | 0.226" | 0.132" | 0.035" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-234 | — | 5 | 90350A312 | 00000 | 8860K12 | 0000 | ||
8-32 | ||||||||||||||
| 1/4" | 0.27" | 0.156" | 0.047" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-241 | — | 5 | 90350A313 | 00000 | 8860K13 | 0000 | ||
| 3/8" | 0.27" | 0.156" | 0.046" | Fully Threaded | 80,000 | AN500AD8-6, Fed. Spec. QQ-P-35, MS35275-243, NASM35275 | — | 5 | 90350A265 | 0000 | 8860K13 | 0000 | ||
| 1/2" | 0.27" | 0.156" | 0.046" | Fully Threaded | 80,000 | AN500AD8-8, Fed. Spec. QQ-P-35, MS35275-245, NASM35275 | — | 5 | 90350A270 | 0000 | 8860K13 | 0000 | ||
| 3/4" | 0.27" | 0.156" | 0.046" | Fully Threaded | 80,000 | AN500AD8-12, Fed. Spec. QQ-P-35, MS35275-247, NASM35275 | — | 5 | 90350A275 | 0000 | 8860K13 | 0000 | ||
| 1" | 0.27" | 0.156" | 0.047" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-249 | — | 5 | 90350A314 | 00000 | 8860K13 | 0000 | ||
1/4"-20 | ||||||||||||||
| 3/8" | 0.414" | 0.237" | 0.047" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-277 | — | 5 | 90350A317 | 00000 | 8860K13 | 0000 | ||
| 1/2" | 0.414" | 0.237" | 0.047" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-279 | — | 5 | 90350A318 | 00000 | 8860K13 | 0000 | ||
| 3/4" | 0.414" | 0.237" | 0.047" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-281 | — | 5 | 90350A319 | 00000 | 8860K13 | 0000 | ||
| 1" | 0.414" | 0.237" | 0.047" | Fully Threaded | 80,000 | Fed. Spec. QQ-P-35, MS35275-283 | — | 5 | 90350A321 | 00000 | 8860K13 | 0000 | ||
