Specifications Met Specifications Met |
---|
System of Measurement System of Measurement |
---|
|
For Screw Size For Screw Size |
---|
|
|
|
Material Material |
---|
|
Washer Type Washer Type |
---|
|
OD OD |
---|
ID ID |
---|
|
Thickness Thickness |
---|
|
Hardness Hardness |
---|
|
Flange Diameter (D) Flange Diameter (D) |
---|
|
|
|
Mount Type Mount Type |
---|
![]() | Press Fit |
Shape Shape |
---|
![]() | Round |
For Use Outdoors For Use Outdoors |
---|
|
For Use With For Use With |
---|
|
More
Choose these washers for their adherence to strict military standards for material and construction.
18-8 stainless steel and 321 stainless steel washers have excellent corrosion resistance in most environments. They may be mildly magnetic. Passivated 18-8 stainless steel washers have added protection against oxidation and corrosion. Black-oxide 18-8 stainless steel washers have a matte-black finish.
Cadmium- and zinc yellow-chromate plated steel washers are corrosion resistant in wet environments.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID | OD | Thick. | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Passivated 18-8 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
MS15795/NASM15795 | ||||||||
No. 1 | 0.078" | 0.188" | 0.016"-0.025" | Rockwell B70 | MS15795-801; NASM15795 | 500 | 000000000 | 000000 |
No. 2 | 0.094" | 0.250" | 0.016"-0.025" | Rockwell B70 | MS15795-802; NASM15795; ASME B18.21.1 | 500 | 000000000 | 00000 |
No. 4 | 0.125" | 0.250" | 0.017"-0.028" | Rockwell B70 | MS15795-803; NASM15795 | 500 | 000000000 | 00000 |
No. 4 | 0.125" | 0.312" | 0.025"-0.040" | Rockwell B70 | MS15795-804; NASM15795; ASME B18.21.1 | 500 | 000000000 | 00000 |
No. 6 | 0.156" | 0.312" | 0.027"-0.048" | Rockwell B70 | MS15795-805; NASM15795 | 250 | 000000000 | 0000 |
No. 6 | 0.156" | 0.375" | 0.036"-0.065" | Rockwell B70 | MS15795-806; NASM15795; ASME B18.21.1 | 250 | 000000000 | 00000 |
No. 8 | 0.188" | 0.375" | 0.036"-0.065" | Rockwell B70 | MS15795-807; NASM15795 | 250 | 000000000 | 00000 |
No. 8 | 0.188" | 0.438" | 0.036"-0.065" | Rockwell B70 | MS15795-841; NASM15795; ASME B18.21.1 | 125 | 000000000 | 0000 |
No. 10 | 0.219" | 0.438" | 0.036"-0.065" | Rockwell B70 | MS15795-808; NASM15795 | 250 | 000000000 | 00000 |
No. 10 | 0.219" | 0.500" | 0.036"-0.065" | Rockwell B70 | MS15795-842; NASM15795; ASME B18.21.1 | 100 | 000000000 | 0000 |
No. 12 | 0.250" | 0.562" | 0.051"-0.080" | Rockwell B70 | MS15795-809; NASM15795; ASME B18.21.1 | 100 | 000000000 | 00000 |
1/4" | 0.281" | 0.625" | 0.051"-0.080" | Rockwell B70 | MS15795-810; NASM15795; ASME B18.21.1 | 50 | 000000000 | 0000 |
1/4" | 0.312" | 0.734" | 0.051"-0.080" | Rockwell B70 | MS15795-811; NASM15795; ASME B18.21.1 | 25 | 000000000 | 0000 |
5/16" | 0.344" | 0.688" | 0.051"-0.080" | Rockwell B70 | MS15795-812; NASM15795; ASME B18.21.1 | 25 | 000000000 | 0000 |
5/16" | 0.375" | 0.875" | 0.064"-0.104" | Rockwell B70 | MS15795-813; NASM15795 | 25 | 000000000 | 00000 |
3/8" | 0.406" | 0.812" | 0.051"-0.080" | Rockwell B70 | MS15795-814; NASM15795; ASME B18.21.1 | 50 | 000000000 | 00000 |
3/8" | 0.438" | 1.000" | 0.064"-0.104" | Rockwell B70 | MS15795-815; NASM15795; ASME B18.21.1 | 10 | 000000000 | 0000 |
7/16" | 0.469" | 0.922" | 0.051"-0.080" | Rockwell B70 | MS15795-816; NASM15795; ASME B18.21.1 | 25 | 000000000 | 00000 |
7/16" | 0.500" | 1.250" | 0.064"-0.104" | Rockwell B70 | MS15795-817; NASM15795; ASME B18.21.1 | 10 | 000000000 | 0000 |
1/2" | 0.531" | 1.062" | 0.074"-0.121" | Rockwell B70 | MS15795-818; NASM15795; ASME B18.21.1 | 10 | 000000000 | 0000 |
1/2" | 0.562" | 1.375" | 0.086"-0.132" | Rockwell B70 | MS15795-819; NASM15795; ASME B18.21.1 | 10 | 000000000 | 00000 |
5/8" | 0.656" | 1.312" | 0.074"-0.121" | Rockwell B70 | MS15795-820; NASM15795; ASME B18.21.1 | 10 | 000000000 | 00000 |
5/8" | 0.688" | 1.750" | 0.108"-0.160" | Rockwell B70 | MS15795-821; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
3/4" | 0.812" | 1.469" | 0.108"-0.160" | Rockwell B70 | MS15795-822; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
3/4" | 0.812" | 2.000" | 0.122"-0.177" | Rockwell B70 | MS15795-823; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
7/8" | 0.938" | 1.750" | 0.108"-0.160" | Rockwell B70 | MS15795-824; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
7/8" | 0.938" | 2.250" | 0.136"-0.192" | Rockwell B70 | MS15795-825; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
1" | 1.062" | 2.000" | 0.108"-0.160" | Rockwell B70 | MS15795-826; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
1" | 1.062" | 2.500" | 0.136"-0.192" | Rockwell B70 | MS15795-827; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
Passivated Black-Oxide 18-8 Stainless Steel | ||||||||
MS15795/NASM15795 | ||||||||
No. 1 | 0.078" | 0.188" | 0.016"-0.025" | Rockwell B68 | MS15795-801B; NASM15795 | 100 | 000000000 | 0000 |
No. 2 | 0.094" | 0.218" | 0.018"-0.022" | Rockwell B68 | MS15795-844B; NASM15795 | 100 | 000000000 | 0000 |
No. 2 | 0.094" | 0.250" | 0.016"-0.025" | Rockwell B68 | MS15795-802B; NASM15795; ASME B18.21.1 | 100 | 000000000 | 00000 |
No. 4 | 0.125" | 0.250" | 0.017"-0.028" | Rockwell B68 | MS15795-803B; NASM15795 | 100 | 000000000 | 0000 |
No. 4 | 0.125" | 0.312" | 0.025"-0.040" | Rockwell B68 | MS15795-804B; NASM15795; ASME B18.21.1 | 100 | 000000000 | 00000 |
No. 6 | 0.156" | 0.312" | 0.027"-0.048" | Rockwell B68 | MS15795-805B; NASM15795 | 100 | 000000000 | 0000 |
No. 6 | 0.156" | 0.375" | 0.036"-0.065" | Rockwell B68 | MS15795-806B; NASM15795; ASME B18.21.1 | 100 | 000000000 | 00000 |
No. 6 | 0.172" | 0.281" | 0.029"-0.039" | Rockwell B68 | MS15795-845B; NASM15795 | 100 | 000000000 | 0000 |
No. 6 | 0.172" | 0.312" | 0.029"-0.039" | Rockwell B68 | MS15795-856B; NASM15795 | 100 | 000000000 | 0000 |
No. 8 | 0.188" | 0.375" | 0.036"-0.065" | Rockwell B68 | MS15795-807B; NASM15795 | 100 | 000000000 | 0000 |
No. 8 | 0.188" | 0.438" | 0.036"-0.065" | Rockwell B68 | MS15795-841B; NASM15795; ASME B18.21.1 | 100 | 000000000 | 0000 |
No. 10 | 0.203" | 0.375" | 0.019"-0.021" | Rockwell B68 | MS15795-846B; NASM15795 | 100 | 000000000 | 0000 |
No. 10 | 0.203" | 0.562" | 0.029"-0.035" | Rockwell B68 | MS15795-847B; NASM15795 | 100 | 000000000 | 00000 |
No. 10 | 0.203" | 0.562" | 0.057"-0.069" | Rockwell B68 | MS15795-848B; NASM15795 | 50 | 000000000 | 0000 |
No. 10 | 0.203" | 0.625" | 0.035"-0.045" | Rockwell B68 | MS15795-849B; NASM15795 | 50 | 000000000 | 0000 |
No. 10 | 0.203" | 0.734" | 0.025"-0.045" | Rockwell B68 | MS15795-857B; NASM15795 | 50 | 000000000 | 0000 |
No. 10 | 0.203" | 1.062" | 0.017"-0.023" | Rockwell B68 | MS15795-850B; NASM15795 | 10 | 000000000 | 0000 |
No. 10 | 0.219" | 0.438" | 0.036"-0.065" | Rockwell B68 | MS15795-808B; NASM15795 | 100 | 000000000 | 0000 |
No. 10 | 0.219" | 0.500" | 0.036"-0.065" | Rockwell B68 | MS15795-842B; NASM15795; ASME B18.21.1 | 100 | 000000000 | 00000 |
1/4" | 0.250" | 0.562" | 0.051"-0.080" | Rockwell B68 | MS15795-809B; NASM15795 | 100 | 000000000 | 00000 |
1/4" | 0.250" | 0.688" | 0.065"-0.075" | Rockwell B68 | MS15795-851B; NASM15795 | 25 | 000000000 | 00000 |
1/4" | 0.266" | 0.458" | 0.028"-0.046" | Rockwell B68 | MS15795-858B; NASM15795 | 100 | 000000000 | 00000 |
1/4" | 0.266" | 0.625" | 0.026"-0.036" | Rockwell B68 | MS15795-852B; NASM15795 | 100 | 000000000 | 00000 |
1/4" | 0.266" | 0.688" | 0.046"-0.054" | Rockwell B68 | MS15795-853B; NASM15795 | 50 | 000000000 | 0000 |
1/4" | 0.281" | 0.625" | 0.051"-0.080" | Rockwell B68 | MS15795-810B; NASM15795; ASME B18.21.1 | 50 | 000000000 | 0000 |
1/4" | 0.296" | 0.438" | 0.029"-0.035" | Rockwell B68 | MS15795-854B; NASM15795 | 100 | 000000000 | 0000 |
5/16" | 0.312" | 0.734" | 0.051"-0.080" | Rockwell B68 | MS15795-811B; NASM15795 | 50 | 000000000 | 00000 |
5/16" | 0.344" | 0.688" | 0.051"-0.080" | Rockwell B68 | MS15795-812B; NASM15795; ASME B18.21.1 | 50 | 000000000 | 0000 |
3/8" | 0.375" | 0.875" | 0.064"-0.104" | Rockwell B68 | MS15795-813B; NASM15795 | 25 | 000000000 | 0000 |
3/8" | 0.406" | 0.812" | 0.051"-0.080" | Rockwell B68 | MS15795-814B; NASM15795; ASME B18.21.1 | 50 | 000000000 | 00000 |
7/16" | 0.438" | 1.000" | 0.064"-0.104" | Rockwell B68 | MS15795-815B; NASM15795 | 25 | 000000000 | 00000 |
7/16" | 0.469" | 0.922" | 0.051"-0.080" | Rockwell B68 | MS15795-816B; NASM15795; ASME B18.21.1 | 25 | 000000000 | 00000 |
1/2" | 0.500" | 1.250" | 0.064"-0.104" | Rockwell B68 | MS15795-817B; NASM15795 | 10 | 000000000 | 00000 |
1/2" | 0.531" | 1.062" | 0.074"-0.121" | Rockwell B68 | MS15795-818B; NASM15795; ASME B18.21.1 | 10 | 000000000 | 0000 |
1/2" | 0.531" | 1.250" | 0.090"-0.112" | Rockwell B68 | MS15795-855B; NASM15795 | 10 | 000000000 | 00000 |
1/2" | 0.562" | 1.375" | 0.086"-0.132" | Rockwell B68 | MS15795-819B; NASM15795; ASME B18.21.1 | 5 | 000000000 | 0000 |
9/16" | 0.594" | 1.469" | 0.090"-0.112" | Rockwell B68 | MS15795-843B; NASM15795 | 5 | 000000000 | 00000 |
5/8" | 0.656" | 1.312" | 0.074"-0.121" | Rockwell B68 | MS15795-820B; NASM15795; ASME B18.21.1 | 5 | 000000000 | 0000 |
3/4" | 0.812" | 1.469" | 0.108"-0.160" | Rockwell B68 | MS15795-822B; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
3/4" | 0.812" | 2.000" | 0.122"-0.177" | Rockwell B68 | MS15795-823B; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
7/8" | 0.938" | 1.750" | 0.108"-0.160" | Rockwell B68 | MS15795-824B; NASM15795; ASME B18.21.1 | 5 | 000000000 | 00000 |
7/8" | 0.938" | 2.250" | 0.136"-0.192" | Rockwell B68 | MS15795-825B; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
1" | 1.062" | 2.000" | 0.108"-0.160" | Rockwell B68 | MS15795-826B; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
1" | 1.062" | 2.500" | 0.136"-0.192" | Rockwell B68 | MS15795-827B; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
1 1/8" | 1.250" | 2.750" | 0.136"-0.192" | Rockwell B68 | MS15795-828B; NASM15795; ASME B18.21.1 | 1 | 000000000 | 0000 |
Cadmium-Plated Steel | ||||||||
AN970/NASM970 | ||||||||
No. 10 | 0.203" | 0.875" | 0.053"-0.073" | Rockwell B40 | AN970-3; NASM970 | 100 | 000000000 | 00000 |
1/4" | 0.265" | 1.125" | 0.053"-0.073" | Rockwell B40 | AN970-4; NASM970 | 50 | 000000000 | 0000 |
5/16" | 0.328" | 1.375" | 0.053"-0.073" | Rockwell B40 | AN970-5; NASM970 | 50 | 000000000 | 00000 |
3/8" | 0.390" | 1.625" | 0.053"-0.073" | Rockwell B40 | AN970-6; NASM970 | 25 | 000000000 | 0000 |
7/16" | 0.453" | 1.812" | 0.099"-0.119" | Rockwell B40 | AN970-7; NASM970 | 10 | 000000000 | 0000 |
1/2" | 0.515" | 2.000" | 0.099"-0.119" | Rockwell B40 | AN970-8; NASM970 | 10 | 000000000 | 00000 |
9/16" | 0.578" | 2.188" | 0.115"-0.135" | Rockwell B40 | AN970-9; NASM970 | 5 | 000000000 | 0000 |
5/8" | 0.640" | 2.375" | 0.115"-0.135" | Rockwell B40 | AN970-10; NASM970 | 5 | 000000000 | 0000 |
Choose these washers for their adherence to strict military standards for material and construction. Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip. Use with fasteners that have heads large enough to make contact with the teeth, such as pan, button, and binding head screws.
410 stainless steel washers have excellent wear resistance.
Zinc-plated steel washers have an outer layer of zinc that protects the inner steel from rust and extends the life of the washer.
Bronze washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID | OD | Thick. | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
410 Stainless Steel | ||||||||
---|---|---|---|---|---|---|---|---|
MS-35335/NASM 35335 | ||||||||
No. 4 | 0.115" | 0.260" | 0.015"-0.019" | Rockwell C40 | ASME B18.21.1; MS35335-57; NASM35335 | 25 | 000000000 | 000000 |
No. 6 | 0.141" | 0.320" | 0.016"-0.022" | Rockwell C40 | ASME B18.21.1; MS35335-58; NASM35335 | 25 | 000000000 | 00000 |
No. 8 | 0.168" | 0.381" | 0.018"-0.023" | Rockwell C40 | ASME B18.21.1; MS35335-59; NASM35335 | 25 | 000000000 | 00000 |
No. 10 | 0.195" | 0.410" | 0.020"-0.025" | Rockwell C40 | ASME B18.21.1; MS35335-60; NASM35335 | 25 | 000000000 | 00000 |
1/4" | 0.256" | 0.510" | 0.023"-0.028" | Rockwell C40 | ASME B18.21.1; MS35335-61; NASM35335 | 25 | 000000000 | 00000 |
5/16" | 0.320" | 0.610" | 0.028"-0.034" | Rockwell C40 | ASME B18.21.1; MS35335-62; NASM35335 | 25 | 000000000 | 00000 |
3/8" | 0.384" | 0.694" | 0.032"-0.040" | Rockwell C40 | ASME B18.21.1; MS35335-63; NASM35335 | 25 | 000000000 | 00000 |
7/16" | 0.448" | 0.760" | 0.032"-0.040" | Rockwell C40 | ASME B18.21.1; MS35335-64; NASM35335 | 25 | 000000000 | 00000 |
1/2" | 0.513" | 0.900" | 0.037"-0.045" | Rockwell C40 | ASME B18.21.1; MS35335-65; NASM35335 | 10 | 000000000 | 0000 |
9/16" | 0.576" | 0.985" | 0.037"-0.045" | Rockwell C40 | ASME B18.21.1; MS35335-66; NASM35335 | 10 | 000000000 | 0000 |
5/8" | 0.641" | 1.070" | 0.042"-0.050" | Rockwell C40 | ASME B18.21.1; MS35335-67; NASM35335 | 5 | 000000000 | 0000 |
3/4" | 0.768" | 1.260" | 0.047"-0.055" | Rockwell C40 | ASME B18.21.1; MS35335-68; NASM35335 | 5 | 000000000 | 0000 |
7/8" | 0.897" | 1.410" | 0.052"-0.060" | Rockwell C40 | ASME B18.21.1; MS35335-69; NASM35335 | 1 | 000000000 | 0000 |
1" | 1.025" | 1.620" | 0.059"-0.067" | Rockwell C40 | ASME B18.21.1; MS35335-70; NASM35335 | 1 | 000000000 | 0000 |
Zinc-Plated Steel | ||||||||
MS-35335/NASM 35335 | ||||||||
No. 4 | 0.115" | 0.260" | 0.015"-0.019" | Rockwell C40 | ASME B18.21.1; MS35335-29; NASM35335 | 100 | 000000000 | 0000 |
No. 6 | 0.141" | 0.320" | 0.016"-0.022" | Rockwell C40 | ASME B18.21.1; MS35335-30; NASM35335 | 100 | 000000000 | 00000 |
No. 8 | 0.168" | 0.381" | 0.018"-0.023" | Rockwell C40 | ASME B18.21.1; MS35335-31; NASM35335 | 100 | 000000000 | 00000 |
No. 10 | 0.195" | 0.410" | 0.020"-0.025" | Rockwell C40 | ASME B18.21.1; MS35335-32; NASM35335 | 100 | 000000000 | 00000 |
1/4" | 0.256" | 0.510" | 0.023"-0.028" | Rockwell C40 | ASME B18.21.1; MS35335-33; NASM35335 | 100 | 000000000 | 00000 |
5/16" | 0.320" | 0.610" | 0.028"-0.034" | Rockwell C40 | ASME B18.21.1; MS35335-34; NASM35335 | 50 | 000000000 | 00000 |
3/8" | 0.384" | 0.694" | 0.032"-0.040" | Rockwell C40 | ASME B18.21.1; MS35335-35; NASM35335 | 50 | 000000000 | 00000 |
7/16" | 0.448" | 0.760" | 0.032"-0.040" | Rockwell C40 | ASME B18.21.1; MS35335-36; NASM35335 | 25 | 000000000 | 00000 |
1/2" | 0.513" | 0.900" | 0.037"-0.045" | Rockwell C40 | ASME B18.21.1; MS35335-37; NASM35335 | 25 | 000000000 | 00000 |
9/16" | 0.576" | 0.985" | 0.037"-0.045" | Rockwell C40 | ASME B18.21.1; MS35335-38; NASM35335 | 25 | 000000000 | 00000 |
5/8" | 0.641" | 1.070" | 0.042"-0.050" | Rockwell C40 | ASME B18.21.1; MS35335-39; NASM35335 | 10 | 000000000 | 0000 |
3/4" | 0.768" | 1.260" | 0.047"-0.055" | Rockwell C40 | ASME B18.21.1; MS35335-40; NASM35335 | 10 | 000000000 | 0000 |
7/8" | 0.897" | 1.410" | 0.052"-0.060" | Rockwell C40 | ASME B18.21.1; MS35335-41; NASM35335 | 10 | 000000000 | 0000 |
1" | 1.025" | 1.620" | 0.059"-0.067" | Rockwell C40 | ASME B18.21.1; MS35335-42; NASM35335 | 5 | 000000000 | 0000 |
Bronze | ||||||||
MS-35335/NASM 35335 | ||||||||
No. 4 | 0.115" | 0.260" | 0.015"-0.019" | Not Rated | ASME B18.21.1; MS35335-85; NASM35335 | 50 | 000000000 | 0000 |
No. 6 | 0.141" | 0.320" | 0.016"-0.022" | Not Rated | ASME B18.21.1; MS35335-86; NASM35335 | 25 | 000000000 | 00000 |
No. 10 | 0.195" | 0.410" | 0.020"-0.025" | Not Rated | ASME B18.21.1; MS35335-88; NASM35335 | 25 | 000000000 | 0000 |
1/4" | 0.256" | 0.510" | 0.023"-0.028" | Not Rated | ASME B18.21.1; MS35335-89; NASM35335 | 10 | 000000000 | 0000 |
5/16" | 0.320" | 0.610" | 0.028"-0.034" | Not Rated | ASME B18.21.1; MS35335-90; NASM35335 | 10 | 000000000 | 0000 |
3/8" | 0.384" | 0.694" | 0.032"-0.040" | Not Rated | ASME B18.21.1; MS35335-91; NASM35335 | 10 | 000000000 | 0000 |
1/2" | 0.513" | 0.900" | 0.037"-0.045" | Not Rated | ASME B18.21.1; MS35335-93; NASM35335 | 10 | 000000000 | 0000 |
3/4" | 0.768" | 1.260" | 0.047"-0.055" | Not Rated | ASME B18.21.1; MS35335-96; NASM35335 | 5 | 000000000 | 0000 |
Choose these washers for their adherence to strict military standards for material and construction. Internal teeth dig into the screw head while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Use with fasteners that have small heads, such as fillister and cheese head screws.
Cadmium-plated steel washers are corrosion resistant in wet environments.
Bronze washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.
410 stainless steel washers have excellent wear resistance.
For technical drawings and 3-D models, click on a part number.
For Screw Size | ID | OD | Thick. | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Cadmium-Plated Steel | ||||||||
---|---|---|---|---|---|---|---|---|
MS-35333/NASM 35333 | ||||||||
No. 2 | 0.089" | 0.200" | 0.010"-0.015" | Rockwell C40-50 | ASME B18.21.1; MS35333-35; NASM35333 | 25 | 000000000 | 00000 |
No. 4 | 0.115" | 0.270" | 0.015"-0.019" | Rockwell C40-50 | ASME B18.21.1; MS35333-36; NASM35333 | 25 | 000000000 | 0000 |
No. 6 | 0.141" | 0.295" | 0.017"-0.021" | Rockwell C40-50 | ASME B18.21.1; MS35333-37; NASM35333 | 25 | 000000000 | 0000 |
No. 8 | 0.168" | 0.340" | 0.018"-0.023" | Rockwell C40-50 | ASME B18.21.1; MS35333-38; NASM35333 | 25 | 000000000 | 0000 |
No. 10 | 0.195" | 0.381" | 0.020"-0.025" | Rockwell C40-50 | ASME B18.21.1; MS35333-39; NASM35333 | 25 | 000000000 | 0000 |
1/4" | 0.256" | 0.478" | 0.023"-0.028" | Rockwell C40-50 | ASME B18.21.1; MS35333-40; NASM35333 | 25 | 000000000 | 0000 |
5/16" | 0.332" | 0.610" | 0.028"-0.034" | Rockwell C40-50 | ASME B18.21.1; MS35333-41; NASM35333 | 25 | 000000000 | 0000 |
3/8" | 0.384" | 0.692" | 0.032"-0.040" | Rockwell C40-50 | ASME B18.21.1; MS35333-42; NASM35333 | 25 | 000000000 | 00000 |
7/16" | 0.448" | 0.789" | 0.032"-0.040" | Rockwell C40-50 | ASME B18.21.1; MS35333-43; NASM35333 | 25 | 000000000 | 00000 |
1/2" | 0.512" | 0.900" | 0.037"-0.045" | Rockwell C40-50 | ASME B18.21.1; MS35333-44; NASM35333 | 25 | 000000000 | 00000 |
5/8" | 0.640" | 1.071" | 0.042"-0.050" | Rockwell C40-50 | ASME B18.21.1; MS35333-46; NASM35333 | 10 | 000000000 | 0000 |
3/4" | 0.769" | 1.245" | 0.047"-0.055" | Rockwell C40-50 | ASME B18.21.1; MS35333-47; NASM35333 | 10 | 000000000 | 0000 |
7/8" | 0.894" | 1.410" | 0.052"-0.060" | Rockwell C40-50 | ASME B18.21.1; MS35333-48; NASM35333 | 10 | 000000000 | 00000 |
1" | 1.019" | 1.637" | 0.059"-0.067" | Rockwell C40-50 | ASME B18.21.1; MS35333-49; NASM35333 | 5 | 000000000 | 0000 |
1 1/4" | 1.260" | 1.950" | 0.059"-0.067" | Rockwell C40-50 | ASME B18.21.1; MS35333-51; NASM35333 | 5 | 000000000 | 0000 |
Bronze | ||||||||
MS-35333/NASM 35333 | ||||||||
No. 2 | 0.089" | 0.200" | 0.010"-0.015" | Rockwell B90 | ASME B18.21.1; MS35333-103; NASM35333 | 25 | 000000000 | 0000 |
No. 4 | 0.115" | 0.270" | 0.015"-0.019" | Rockwell B90 | ASME B18.21.1; MS35333-104; NASM35333 | 25 | 000000000 | 0000 |
No. 6 | 0.141" | 0.295" | 0.017"-0.021" | Rockwell B90 | ASME B18.21.1; MS35333-105; NASM35333 | 25 | 000000000 | 00000 |
No. 8 | 0.168" | 0.340" | 0.018"-0.023" | Rockwell B90 | ASME B18.21.1; MS35333-106; NASM35333 | 25 | 000000000 | 00000 |
No. 10 | 0.195" | 0.381" | 0.020"-0.025" | Rockwell B90 | ASME B18.21.1; MS35333-107; NASM35333 | 25 | 000000000 | 00000 |
1/4" | 0.256" | 0.478" | 0.023"-0.028" | Rockwell B90 | ASME B18.21.1; MS35333-108; NASM35333 | 25 | 000000000 | 00000 |
5/16" | 0.332" | 0.610" | 0.028"-0.034" | Rockwell B90 | ASME B18.21.1; MS35333-109; NASM35333 | 10 | 000000000 | 0000 |
3/8" | 0.384" | 0.692" | 0.032"-0.040" | Rockwell B90 | ASME B18.21.1; MS35333-110; NASM35333 | 10 | 000000000 | 0000 |
1/2" | 0.512" | 0.900" | 0.037"-0.045" | Rockwell B90 | ASME B18.21.1; MS35333-113; NASM35333 | 5 | 000000000 | 0000 |
5/8" | 0.640" | 1.071" | 0.042"-0.050" | Rockwell B90 | ASME B18.21.1; MS35333-115; NASM35333 | 1 | 000000000 | 0000 |
3/4" | 0.769" | 1.245" | 0.047"-0.055" | Rockwell B90 | ASME B18.21.1; MS35333-116; NASM35333 | 1 | 000000000 | 0000 |
410 Stainless Steel | ||||||||
MS-35333/NASM 35333 | ||||||||
No. 2 | 0.089" | 0.200" | 0.010"-0.015" | Rockwell C40-50 | ASME B18.21.1; MS35333-69; NASM35333 | 25 | 000000000 | 0000 |
No. 4 | 0.115" | 0.270" | 0.015"-0.019" | Rockwell C40-50 | ASME B18.21.1; MS35333-70; NASM35333 | 25 | 000000000 | 00000 |
No. 6 | 0.141" | 0.295" | 0.017"-0.021" | Rockwell C40-50 | ASME B18.21.1; MS35333-71; NASM35333 | 25 | 000000000 | 00000 |
No. 8 | 0.168" | 0.340" | 0.018"-0.023" | Rockwell C40-50 | ASME B18.21.1; MS35333-72; NASM35333 | 25 | 000000000 | 00000 |
No. 10 | 0.195" | 0.381" | 0.020"-0.025" | Rockwell C40-50 | ASME B18.21.1; MS35333-73; NASM35333 | 25 | 000000000 | 00000 |
1/4" | 0.256" | 0.478" | 0.023"-0.028" | Rockwell C40-50 | ASME B18.21.1; MS35333-74; NASM35333 | 25 | 000000000 | 00000 |
5/16" | 0.332" | 0.610" | 0.028"-0.034" | Rockwell C40-50 | ASME B18.21.1; MS35333-75; NASM35333 | 25 | 000000000 | 0000 |
3/8" | 0.384" | 0.692" | 0.032"-0.040" | Rockwell C40-50 | ASME B18.21.1; MS35333-76; NASM35333 | 25 | 000000000 | 00000 |
7/16" | 0.448" | 0.789" | 0.032"-0.040" | Rockwell C40-50 | ASME B18.21.1; MS35333-77; NASM35333 | 25 | 000000000 | 00000 |
1/2" | 0.512" | 0.900" | 0.037"-0.045" | Rockwell C40-50 | ASME B18.21.1; MS35333-78; NASM35333 | 10 | 000000000 | 00000 |
5/8" | 0.640" | 1.071" | 0.042"-0.050" | Rockwell C40-50 | ASME B18.21.1; MS35333-80; NASM35333 | 10 | 000000000 | 00000 |
3/4" | 0.769" | 1.245" | 0.047"-0.055" | Rockwell C40-50 | ASME B18.21.1; MS35333-81; NASM35333 | 5 | 000000000 | 00000 |
7/8" | 0.894" | 1.410" | 0.052"-0.060" | Rockwell C40-50 | ASME B18.21.1; MS35333-82; NASM35333 | 5 | 000000000 | 00000 |
Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.
Grommets with a tooth lock washer keep material from loosening and rotating better than those with a standard washer.
Grommets that meet MIL-G-16491D, NASM20230, and AN230 adhere to military dimensional standards.
Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
---|---|---|---|---|---|---|---|---|---|
00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | MIL-G-16491D, NASM20230, AN230 | 10 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 0000 |
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 00000 |
4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 0000 |
5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 00000 |
6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 10 | 00000000 | 00000 |
Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
---|---|---|---|---|---|---|---|---|---|
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
4 | 0.295" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
5 | 0.251" | 5/8" | 1.22" | 0.33" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
Throat | |||||
---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |
7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |
The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets adhere to military dimensional standards MIL-G-16491D, NASM20230, and AN230. They can be used outdoors.
Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
---|---|---|---|---|---|---|---|---|---|
00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 00000 |
0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 0000 |
1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 0000 |
2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 0000 |
3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 50 | 0000000 | 00000 |
4 | 0.296" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491D, NASM20230, AN230, NASM16491 | 25 | 0000000 | 0000 |
Nickel-Plated Brass | |||||||||
00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 0000 |
2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
Throat | |||||
---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |
7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |
A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material. Use a cutting punch (sold separately) to create the hole, then set the grommet using either an installation punch or a press (both sold separately). Trade size refers to the hole size and the size of the installation tool needed. All of these grommets can be used outdoors.
Grommets with a tooth lock washer keep material from loosening and rotating better than those with a standard washer.
Grommets that meet MIL-G-16491D, NASM20230, and AN230 adhere to military dimensional standards.
Brass grommets are strong and have good corrosion resistance. Nickel-plated brass grommets have more corrosion resistance than brass grommets.
Hammer-driven cutting punches create holes for installing grommets when you strike them with a wooden or rawhide mallet. Hammer-driven installation punches set grommets in a hole when you strike them with a wooden or rawhide mallet. Manual presses set grommets in a hole when you squeeze the adjustable pliers-grip handle. Requires a die set (sold separately).
For technical drawings and 3-D models, click on a part number.
Trade Size | For Max. Material Thick. | ID (C) | Flange Dia. (D) | Dp. Under Flange (F) | For Use Outdoors | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
---|---|---|---|---|---|---|---|---|---|
0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 000000 |
1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | MIL-G-16491D, NASM20230, AN230 | 50 | 0000000 | 00000 |
2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 0000 |
3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 00000 |
4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | MIL-G-16491D, NASM20230, AN230 | 25 | 0000000 | 00000 |
5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | MIL-G-16491D, NASM20230, AN230 | 10 | 0000000 | 0000 |
6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | MIL-G-16491D, NASM20230, AN230 | 5 | 0000000 | 0000 |
7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | MIL-G-16491D, NASM20230, AN230 | 5 | 0000000 | 00000 |
8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | MIL-G-16491D, NASM20230, AN230 | 5 | 0000000 | 00000 |
Nickel-Plated Brass | |||||||||
0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 50 | 00000000 | 00000 |
1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 0000 |
2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 0000 |
3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 25 | 00000000 | 00000 |
4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 10 | 00000000 | 0000 |
5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 10 | 00000000 | 0000 |
6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 5 | 00000000 | 0000 |
7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 5 | 00000000 | 00000 |
8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | MIL-G-16491D, NASM16491, NASM20230, AN230 | 5 | 00000000 | 00000 |
Throat | |||||
---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |
7/8" | 3 1/4" | 1 3/4" | Aluminum | 000000000 | 0000000 |