Color Color | Show |
---|
![]() | Beige |
Color Color | Hide |
---|
System of Measurement System of Measurement |
---|
|
Thickness Thickness |
---|

Width Width |
---|
Length Length |
---|
Flexibility Flexibility |
---|
|
|
Insulation Type Insulation Type |
---|
![]() | ![]() |
Sheet/Strip | Spray Foam |
Maximum Temperature Maximum Temperature |
---|
|
Specifications Met Specifications Met |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Electrical Properties Electrical Properties |
---|
|
Density Density |
---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Cell Type Cell Type |
---|
![]() | Closed |
About Foam
More
About Rubber
More
About Selecting Thermal Insulation
More
Super-Cushioning Foam Mesh Sheets

- Color: Black, White, or Beige
- Temperature Range: -20° to 140° F
- Cell Type : Closed
- For Use Outdoors: No
- Pressure to Compress 25%: Not Rated
- Tensile Strength Rating: Not Rated
- Oil-Resistance Rating: Not Rated
There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required. This vinyl-coated polyester foam has closed-cell construction, which restricts water, air, and gases from being absorbed. Sheets are washable and moisture and bacteria resistant.
EMI/RFI Shielding Gaskets
These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems. They compress to fill gaps and complete a grounding path around doors and access panels.
Sheets work well between two flat surfaces.
Half-round gaskets work well in grooves. Use a gasket slightly thicker than the depth of the groove; it will compress to fill the gap.
P-shaped gaskets fit around doors and corners. Attach them with the nonconductive adhesive or add bolts or screws through the flange for extra security.
Polyurethane foam gaskets are covered with a conductive nickel/copper braided fabric. A nonconductive adhesive holds them in place. To protect sensitive equipment, they block at least twice as much interference as urethane foam gaskets. They meet UL 94 V-0, so they self-extinguish within 10 seconds if they catch fire and won’t spread the fire by dripping. Cut these gaskets to length with scissors.

Foam Sheet with
Adhesive Backing
Thickness | Width | Length | Interference Reduction @ Frequency | Backing Type | Temperature Range, °F | Color | For Use Outdoors | Specifications Met | Each | |
Polyurethane Foam | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.02" | 0.157" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 000000 |
0.04" | 0.2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.04" | 13/32" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.04" | 0.6" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.05" | 0.09" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.051" | 0.157" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.051" | 0.394" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.06" | 0.1" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.06" | 1/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 0.1" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 0.16" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 0.2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 1/2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 3/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 1" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.095" | 7/32" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/8" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.16" | 11/32" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
3/16" | 3/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
3/16" | 3/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.2" | 0.2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/4" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/4" | 3/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/4" | 1/2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/4" | 0.6" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
3/8" | 3/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
3/8" | 1/2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/2" | 1/2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/2" | 3/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.67" | 0.67" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.787" | 0.787" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |

Thickness | Width | Length | Interference Reduction @ Frequency | Backing Type | Temperature Range, °F | Color | For Use Outdoors | Specifications Met | Each | |
Polyurethane Foam | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.04" | 0.15" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 000000 |
0.05" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.06" | 1/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.06" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.07" | 1/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 0.08" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 0.16" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.08" | 0.394" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.09" | 0.09" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.09" | 0.15" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.1" | 0.3" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.11" | 0.18" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 000000 | 00000 |
1/8" | 3/16" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/8" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.14" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.15" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.16" | 1/4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.18" | 0.4" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.195" | 0.26" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.236" | 0.236" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
1/4" | 3/8" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.295" | 0.355" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.315" | 0.63" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
3/8" | 1/2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.43" | 1/2" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
9/16" | 0.709" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |
0.67" | 0.67" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 00000 |

Thickness | Width | Length | Interference Reduction @ Frequency | Backing Type | Temperature Range, °F | Color | For Use Outdoors | Specifications Met | Each | |
Polyurethane Foam | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
0.2" | 13/32" | 48" | 80 dB @ 1 GHz | Adhesive | -40° to 158° | Beige | No | UL 94 V-0 | 0000000 | 000000 |
EMI/RFI Shielding Gaskets for Data Connectors
Fit these gaskets over connectors that plug in to your enclosure to absorb interference and prevent signal problems. They block electromagnetic interference (EMI) and radio frequency interference (RFI), which cause flickering displays and inaccurate readings.
Silicone gaskets are good for high temperature and wet environments because they seal out moisture. Most are sized to fit specific mil. spec. connector shell sizes.
Interference reduction at frequency, also known as attenuation, describes how much EMI and RFI is blocked. These gaskets block most interference; use them for general purpose shielding as well as protecting sensitive or precision components.
For technical drawings and 3-D models, click on a part number.

Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Connector Shell Size | ID | Length | Width | Thickness | Interference Reduction @ Frequency | Backing Type | Temperature Range, °F | Color | For Use Outdoors | Diameter | Number of | Specifications Met | Each | |
Silicone Rubber | ||||||||||||||
__ | 7/16" | 11/16" | 11/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 000000 |
__ | 7/16" | 13/16" | 13/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
6 | 3/8" | 3/4" | 3/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
8 | 1/2" | 7/8" | 7/8" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
8 | 9/16" | 13/16" | 13/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
8 | 5/8" | 27/32" | 27/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
9, 10 | 3/4" | 31/32" | 31/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
10 | 11/16" | 15/16" | 15/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
10S, 10SL | 5/8" | 1" | 1" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
11, 12 | 7/8" | 1 1/16" | 1 1/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
12, 12S, 12SL | 3/4" | 1 3/32" | 1 3/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
13, 14 | 1" | 1 5/32" | 1 5/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
14 | 15/16" | 1 1/8" | 1 1/8" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
14, 14S | 7/8" | 1 3/16" | 1 3/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
15, 16 | 1 1/8" | 1 1/4" | 1 1/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
16 | 1 1/16" | 1 1/4" | 1 1/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
16, 16S | 1" | 1 9/32" | 1 9/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
17, 18 | 1 1/4" | 1 11/32" | 1 11/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
18 | 1 3/16" | 1 11/32" | 1 11/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
18, 18S | 1 1/8" | 1 3/8" | 1 3/8" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.16" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
19, 20 | 1 3/8" | 1 1/2" | 1 1/2" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
20 | 1 1/4" | 1 1/2" | 1 1/2" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.17" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
20 | 1 5/16" | 1 15/32" | 1 15/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
21, 22 | 1 1/2" | 1 5/8" | 1 5/8" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.14" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
22 | 1 3/8" | 1 5/8" | 1 5/8" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.17" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
22 | 1 7/16" | 1 9/16" | 1 9/16" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.13" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
23, 24 | 1 5/8" | 1 3/4" | 1 3/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.17" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
24 | 1 1/2" | 1 3/4" | 1 3/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.2" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
24 | 1 9/16" | 1 23/32" | 1 23/32" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.15" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
25 | 1 3/4" | 1 7/8" | 1 7/8" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.17" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
28 | 1 3/4" | 2" | 2" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.2" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
32 | 2" | 2 1/4" | 2 1/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.22" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
36 | 2 1/4" | 2 1/2" | 2 1/2" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.22" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
40 | 2 1/2" | 2 3/4" | 2 3/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.22" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
44 | 2 25/32" | 3" | 3" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.22" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
48 | 3 1/32" | 3 1/4" | 3 1/4" | 1/32" | 100 dB @ 1 GHz | Plain | -65° to 300° | Beige | Yes | 0.22" | 4 | MIL-DTL-83528 | 0000000 | 00000 |
Impact-Resistant Low-Temperature Rigid PVC Foam Insulation Sheets

- Temperature Range: -325° to 160° F
- Heat Flow Rate: 0.22 Btu @ 75° F
- Density: See table
- Color: Beige
Made of rugged PVC foam, these rigid sheets absorb impact and restrict the absorption of water, air, and gas. Use in applications with operating temperatures below 32° F.
For technical drawings and 3-D models, click on a part number.
Thick. | Wd. | Lg., ft. | R Value | Flexibility | Each | |
3 lbs./cu. ft. Density | ||||||
---|---|---|---|---|---|---|
3/8" | 32" | 4 | 1.7 | Rigid | 0000000 | 000000 |
1/2" | 32" | 4 | 2.3 | Rigid | 0000000 | 00000 |
3/4" | 32" | 4 | 3.4 | Rigid | 0000000 | 00000 |
1" | 32" | 4 | 4.5 | Rigid | 0000000 | 000000 |
1 1/2" | 32" | 4 | 6.8 | Rigid | 0000000 | 000000 |
5 lbs./cu. ft. Density | ||||||
3/8" | 32" | 4 | 1.7 | Rigid | 0000000 | 00000 |
1/2" | 32" | 4 | 2.3 | Rigid | 0000000 | 00000 |
3/4" | 32" | 4 | 3.4 | Rigid | 0000000 | 000000 |
1" | 32" | 4 | 4.5 | Rigid | 0000000 | 000000 |
1 1/2" | 32" | 4 | 6.8 | Rigid | 0000000 | 000000 |
Spray Foam Insulation

- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.2 Btu @ 72° F
- Density: 1.2 lbs./cu. ft.
- Color: Beige
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.
Each | |||||||||
---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Approximate Coverage | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Useful Life | Includes | Specifications Met | 1-11 | 12-Up | |
12 | 16 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 000000 | 000000 |
24 | 32 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00000 |
24 | 32 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00000 |
Void-Filling Spray Foam Insulation

Cover large areas with this two-part expanding foam insulation. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance.
Reusable foam insulation comes with snap-tip nozzles that spray in either a fan or cone pattern.
- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.16 Btu @ 75° F
- Density: 2.2 lbs./cu. ft.
- Color: Beige
Container | ||||||
---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Includes | Each | |
4 | Can | 5 | 1 | Two Cans of Foam with Two Cone Spray Nozzles | 0000000 | 000000 |
- Temperature Range: -200° to 200° F
- Heat Flow Rate: 0.16 Btu @ 75° F
- Density: 3.1 lbs./cu. ft.
- Color: Beige
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Includes | Each | |
15 | Cylinder | 5 | 5 | 1 | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 0000000 |
30 | Cylinder | 9.6 | 5 | 1 | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 000000 |
Snap-Tip Replacement Nozzles | 00000000 | Each | 00000 |
Flame-Retardant Void-Filling Spray Foam Insulation

- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.154 Btu @ 75° F
- Density: 1.75 lbs./cu. ft.
- Color: Beige
- Specifications Met: ASTM E84 10/350 for Flame and Smoke
This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance. The included snap-tip nozzles spray in either a fan or cone pattern.
Spray Foam Insulation | Snap-Tip Replacement Nozzles | ||||||||
---|---|---|---|---|---|---|---|---|---|
Container Net Weight, lbs. | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Useful Life | Includes | Each | Each | ||
15 | 7.7 cu. ft. | 5 | 1 | Reusable | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 0000000 | 00000000 | 00000 |
30 | 14.9 cu. ft. | 5 | 1 | Reusable | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 000000 | 00000000 | 0000 |
Foam Casting Compounds


expands to fill every
hole and cavity.

Create lightweight molds with these two-part compounds. They expand as foam after they’re poured to fill every cavity. The denser the foam, the less it will expand. Before casting, apply petroleum jelly (not included) to prevent sticking, stretching, and tearing. It won't cause the foam to collapse as it cures.
Rigid compounds form stiff, closed-cell foam, which prevents water and air from flowing through the part. Machinable, they’re dense enough to create prototype modeling blocks, so you can test setups without wearing down tools.
Foam Expansion | Density, lbs./cu. ft. | Time to Harden | Time to Cure | Time to Demold | Cure Temperature, °F | Max. Temperature, °F | Shrinkage | Color | Mixing Required | Weight, lbs. | Each | |
Polyurethane Foam | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid—Machinable | ||||||||||||
2 times | 20 | 3 min. | 15 min. | 15 min. | 75° | 85° | Not Rated | Beige | Yes | 16 | 0000000 | 0000000 |
7 times | 12 | 3 min. | 15 min. | 15 min. | 75° | 85° | Not Rated | Beige | Yes | 16 | 0000000 | 000000 |
7 times | 12 | 3 min. | 15 min. | 15 min. | 75° | 85° | Not Rated | Beige | Yes | 4 | 00000000 | 00000 |
19 times | 4 | 3 min. | 15 min. | 15 min. | 75° | 85° | Not Rated | Beige | Yes | 16 | 0000000 | 000000 |
19 times | 4 | 3 min. | 15 min. | 15 min. | 75° | 85° | Not Rated | Beige | Yes | 4 | 00000000 | 00000 |