Over 48,000 metals now include traceable material certificates.

Also known as twist-lock devices, these connectors are built to handle tough, repetitive-use applications, and are more durable than standard turn-lock connectors. A quarter turn locks them in place to remain secure in high-vibration applications and prevent accidental disconnection.

Receptacles for outlet boxes fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles, they have a ground terminal that is insulated from the mounting strap so you can run an isolated ground wire through the conduit. When mated with a plug, a quarter turn locks them in place to remain secure in high-vibration applications and prevent accidental disconnection. Receptacles fit standard wall plates (not included).

For technical drawings and 3-D models, click on a part number.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded. A red light indicates power only. The lights are visible from any angle for quick identification. A quarter turn locks connectors in place to remain secure in high-vibration applications and prevent accidental disconnection.

For technical drawings and 3-D models, click on a part number.

When mated, connectors meet NEMA 6P for protection against corrosion and washdowns. All have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. A quarter turn locks them in place to remain secure in high-vibration applications and prevent accidental disconnection.

Plugs mate with female receptacles and female sockets with an attached cover.

Male receptacles mate with female sockets without an attached cover.

For technical drawings and 3-D models, click on a part number.

A rubber housing protects these connectors from damage caused by drops and impact. Lock them in place with a quarter turn to remain secure in high-vibration applications and prevent accidental disconnection. Not intended for use in wet or damp environments.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion resistant so they can be used in marine environments. They require a quarter turn to mate.

Plugs have a multiple-ring seal to keep out liquid when mated. They have a locking ring that screws together with sockets and receptacles so connections remain secure in high-vibration applications such as oil drilling and mining operations.

Sockets and receptacles have an attached cover that creates a watertight seal when not mated.

For technical drawings and 3-D models, click on a part number.