Light Technology Light Technology | Show |
|---|
|
Light Technology Light Technology | Hide |
|---|
|
|
Electrical Connection Type Electrical Connection Type |
|---|
 | Wire Leads |
Mount Type Mount Type |
|---|
 | Panel |
Light Color Light Color |
|---|
 | Red |
Light Pattern Light Pattern |
|---|
|
Base Type Base Type |
|---|
 |  |
| Bayonet | Wire Terminal |
 | |
| Screw In |
Signal Type Signal Type |
|---|
|
Color Color |
|---|
 | Orange |
Lens Diameter Lens Diameter |
|---|
|
Lens Material Lens Material |
|---|
|
Number of Wire Leads Number of Wire Leads |
|---|
|
Wire Lead Length Wire Lead Length |
|---|
|
Power Source Power Source |
|---|
|
Material Material |
|---|
|
Beam Spread Beam Spread |
|---|
 |  |
| Sphere | Partial Sphere |
Screw-In Base Size Screw-In Base Size |
|---|
 | Candelabra |
About Brightness
More
About Light Appearance
More
Conical Panel Lights with Wire Leads
The light for 10 mm/3/8" panel cutouts comes with a retaining clip to hold the light in place after installation.
The light for 13 mm/1/2" panel cutouts has a snap-in bezel for easy mounting.
Note: When bulb burns out, the entire light must be replaced.
For technical drawings and 3-D models, click on a part number.
| For Panel Cutout Dia. | For Min. Panel Dp. | Light Color | Light Pattern | Voltage | Lens Dia. | Material | No. of Wire Leads | Wire Lead Lg. | Bezel Material | Specifications Met | Each | |
Neon | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 mm (3/8") | 1 3/8" | Red | Continuous | 120V AC | 7/16" | Plastic | 2 | 10" | __ | UL Recognized Component, CSA Certified | 000000 | 00000 |
| 13 mm (1/2") | 1 5/16" | Red | Continuous | 120V AC | 7/16" | Plastic | 2 | 10" | Metal | UL Recognized Component, CSA Certified | 000000 | 0000 |
Flat Panel Lights with Wire Leads
The light for 10 mm/3/8" panel cutouts comes with a retaining clip to hold the light in place after installation.
The light for 13 mm/1/2" panel cutouts has a snap-in bezel for easy mounting.
Note: When bulb burns out, the entire light must be replaced.
For technical drawings and 3-D models, click on a part number.
| For Panel Cutout Dia. | For Min. Panel Dp. | Light Color | Light Pattern | Voltage | Lens Diameter | Material | No. of Wire Leads | Wire Lead Lg. | Bezel Material | Specifications Met | Each | |
Neon | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 mm (3/8") | 1 9/16" | Red | Continuous | 120V AC | 7/16" | Plastic | 2 | 10" | __ | UL Recognized Component, CSA Certified | 000000 | 00000 |
| 13 mm (1/2") | 1 1/2" | Red | Continuous | 120V AC | 7/16" | Plastic | 2 | 10" | Metal | UL Recognized Component, CSA Certified | 000000 | 0000 |
Bayonet Base Miniature Light Bulbs
Pins on either side of the base lock these bulbs into sockets. These bulbs are sized to fit tight spaces such as indicators and vehicle lights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.
Neon bulbs are more efficient than incandescent bulbs and emit an orange glow.
| Trade No. | Voltage | Wattage | Current | Resistor Included | Light Technology | Rated Life, hrs. | Bulb Dia. | O'all Lg. | Color | Pkg. Qty. | Pkg. | |
Single Contact—Miniature Base (0.36" Base Dia.) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flat Top Bulb | ||||||||||||
| B1A | 120V (220,000 ohms) | 0.04W | 0.3mA | No | Neon | 15,000 | 0.41" | 1.19" | Orange | 5 | 0000000 | 00000 |
| B2A | 120V (47,000 ohms) | 0.08W | 1.2mA | No | Neon | 25,000 | 0.41" | 1.19" | Orange | 5 | 0000000 | 0000 |
Wire-Terminal Base Miniature Light Bulbs
Wire terminals allow you to connect these bulbs to a power source through a panel. These bulbs are sized to fit tight spaces such as such as signs, instruments, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.
Neon bulbs are more efficient than incandescent bulbs and emit an orange glow. They require a resistor to limit current (not included).
| Voltage | Wattage | Brightness, lumens | Current | Trade No. | Bulb Material | Color | Rated Life, hrs. | Bulb Dia. | Bulb Lg. | Wire Terminal Lg. | O'all Lg. | Bulb Shape No. | Pkg. Qty. | Pkg. | |
| 120V (30,000 ohms) | 0.25W | Not Rated | 2mA | C2A | Glass | Orange | 25,000 | 1/4" | 3/4" | 2" | 2 3/4" | T2 | 10 | 0000000 | 00000 |
| 120V (100,000 ohms) | 0.067W | Not Rated | 0.7mA | A9A | Glass | Orange | 25,000 | 1/4" | 3/4" | 2" | 2 3/4" | T2 | 10 | 0000000 | 0000 |
| 120V (150,000 ohms) | 0.059W | Not Rated | 0.5mA | A1A | Glass | Orange | 25,000 | 1/4" | 1.06" | 1" | 2.06" | T2 | 10 | 0000000 | 00000 |
Screw-In Base Miniature Light Bulbs
These bulbs are sized to fit tight spaces such as signs, control panels, indicators, and flashlights. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.
Neon bulbs are more efficient than incandescent bulbs and emit an orange glow.
| Trade No. | Voltage | Wattage | Brightness, lumens | Current | Light Technology | Bulb Material | Color | Rated Life, hrs. | Bulb Dia. | O'all Lg. | Bulb Shape No. | Pkg. Qty. | Pkg. | |
Tubular Bulb—Candelabra Base (1/2" Dia.) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B7A | 120V AC | 0.25W | Not Rated | 2mA | Neon | Glass | Orange | 7,500 | 0.59" | 1 1/2" | T4 1/2 | 1 | 0000000 | 00000 |