Made of foam, these blocks flex to sand around curves.

Neoprene is also known as chloroprene. It offers good oil and abrasion resistance.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

Meeting transportation industry standards for flames, smoke, and toxicity, these neoprene sheets and strips are used as cushioning pads in panels to reduce vibration and noise.

For every 1/4" of thickness there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Jackets, seals, and insulation are just a few of the many uses for rubber tubes.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.

Made of neoprene rubber, these mounts are oil resistant, so they're good for use under generators, HVAC equipment, electric motors, pumps, and blowers.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.

Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Made from a blend of cork and rubber, this material is commonly used for low-pressure applications.

This neoprene gasket material is reinforced with a nylon insert to prevent it from losing shape while under pressure up to 1,000 psi.