These vests meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 and ANSI/ISEA 107 standards for high visibility. They are rated ANSI Class 2 for working on or near roadways. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These vests are mesh acrylic and are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of a durable modacrylic/aramid blend. They have a flap in the front that conceals the zipper.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

These coveralls meet NFPA 70E standards for protection against electrical arc flashes. Check the personal protection equipment (PPE) category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

NFPA 2112 rated coveralls protect against flash fires.

Nomex aramid (men's) won’t melt or drip if it catches fire. It resists wear and abrasion better than other materials. It’s arc rated for PPE category 1.

Cotton (men's) is lightweight and provides better breathability than other materials. Coveralls are stitched with Nomex threads for added durability. They are self-extinguishing and arc rated for PPE category 2.

Cotton/nylon blend (men's) is soft, yet wear resistant, and provides better breathability than modacrylic/aramid blend and Nomex aramid. It’s arc rated for PPE category 2.

Acrylic/Buna-N (men's) is breathable and moisture wicking to keep you cool and dry. It’s arc rated for PPE category 2.

Carbon fiber (women’s), similar to acrylic/Buna-N, is lightweight, breathable, and moisture wicking to keep you cool and dry. It’s arc rated for PPE category 2.

Modacrylic/aramid blend (men's) provides better resistance against arc flashes and is more durable than cotton and acrylic/Buna-N. It’s arc rated for PPE category 4.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls. Long coveralls have added length in the torso, sleeves, and legs, so they are recommended for workers 6' 1" and taller.

These shirts meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Made of acrylic/Buna-N blend, these shirts are breathable and moisture wicking to keep you cool. They have buttons down the front and on the cuffs, as well as two chest pockets.

When measuring chest size, measure around the fullest part of your chest.

These overalls meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Made of modacrylic/aramid blend, these overalls are extremely durable. They have adjustable suspenders; tighten or loosen them to modify the fit. Adjust the hook and loop straps on the cuffs to tighten pant legs around boots.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All base layer materials are lightweight, breathable, and moisture wicking for added comfort.

They all comply with OSHA 29 CFR 1910.269 standards for flame and arc flash protection.

Cotton/acrylic base layers are stretchy for increased mobility and range of motion.

When measuring chest size, measure around the fullest part of your chest.

These pants meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These pants are made of a breathable cotton/nylon blend that’s lightweight, yet durable. Cuffs are open to fit over work boots. They have two waist pockets and two rear pockets.

Find your waist size by measuring just above the top of your hip bone.

These sweatshirts meet NFPA 70E for protection against electrical arc flashes and NFPA 2112 for flame resistance. The front zipper is fully covered for complete protection from fire. Sweatshirts are made of a blended fleece for comfort and warmth. Knit cuffs and a knit waistband fit snugly to prevent heat from escaping.

These gloves meet NFPA 70E for protection against arc-flash hazards. They are made with materials that protect against radiant heat and flames. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.

ASTM D120 rated for use when handling live electrical equipment, these gloves come tested and marked with the test date. You have one year from the test date to put gloves into service before they must be retested. Once in use, gloves should be tested every six months. All gloves meet NFPA 70E for protection against arc-flash hazards.

ASTM defines voltage classes for rubber insulating gloves. Before working with electrical equipment, make sure you have the right protection.

Wear-indicating gloves have a colored inner layer that shows through the coating as it wears off, making it easy to inspect them for signs of wear such as cracks and pinholes.

Protectors (sold separately) must be worn over gloves for ASTM compliance when working with live electrical equipment. Protectors should be the same size as the gloves they will be worn over. Goatskin protectors cannot be sold to Canada due to import regulations.

Strap your glove to an inspection pump (sold separately) and inflate to check Class 1-4 gloves for cracks, pinholes, and other signs of wear. Purchase an adapter (sold separately) to use the inspection pump with Class 0 and 00 gloves.

For protection from low-level arc flash hazards, these kits include several of the necessary safety items in a storage bag. All contents meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All hard hats have a ratchet adjustment with an easy-turn knob.

Style A kits come with a hard hat, face shield, hood, safety glasses, and storage bag.

Style B kits come with coveralls, hard hat, face shield, hood, safety glasses, and two storage bags.When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Each hood has a hard hat with adjustable headgear and a face shield with an antifog coating.

Optional fan (sold separately) mounts on your hood and pumps air inside using a fan motor. It operates on four AA batteries (not included).

Provide protection from low-level arc flash hazards when a full hood is not necessary. These face shields meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Meets ANSI/ISEA Z87.1 basic-impact standards when worn with safety glasses or goggles. The chin guard offers added protection. Hard hats have a ratchet adjustment with an easy-turn knob.