Filter by
For Material Thickness
Grommet Washer Type
Flange Diameter
Depth Under Flange
Performance
Military Specification
Export Control Classification Number (ECCN)
RoHS
DFARS Specialty Metals
Fabric Grommets
Standard Washer
 |
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | NASM20230 | 50 | 9604K21 | 00000 | ||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM20230 | 50 | 9604K22 | 0000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM20230 | 50 | 9604K23 | 0000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | NASM20230 | 50 | 9604K24 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM20230 | 50 | 9604K25 | 00000 | ||
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | NASM20230 | 50 | 9604K26 | 00000 | ||
| 5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | NASM20230 | 25 | 9604K27 | 00000 | ||
| 6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | NASM20230 | 10 | 9604K28 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 00 | 0.063" | 3/16" | 0.425" | 0.135" | Yes | NASM16491 | 50 | 86625K31 | 0000 | ||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 86625K32 | 00000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 86625K33 | 00000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 86625K34 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 50 | 86625K35 | 00000 | ||
| 4 | 0.298" | 1/2" | 1.05" | 0.374" | Yes | NASM16491 | 25 | 86625K36 | 00000 | ||
| 5 | 0.254" | 5/8" | 1.22" | 0.33" | Yes | NASM16491 | 25 | 86625K37 | 00000 | ||
| 6 | 0.149" | 13/16" | 1.75" | 0.232" | Yes | NASM16491 | 10 | 86625K38 | 00000 | ||
 |
Hammer-Driven Installation Punch |
 |
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 00 | 3/16" | — | 9612K25 | 000000 | ||
| 0 | 1/4" | — | 9612K26 | 00000 | ||
| 1 | 9/32" | — | 9612K27 | 00000 | ||
| 2 | 3/8" | — | 9612K28 | 00000 | ||
| 3 | 7/16" | — | 9612K29 | 00000 | ||
| 4 | 1/2" | — | 9612K31 | 00000 | ||
| 5 | 5/8" | — | 9612K32 | 00000 | ||
| 6 | 13/16" | — | 9612K33 | 00000 | ||
Hammer-Driven Cutting Punch | ||||||
| 00 | 3/16" | Steel | 9611K11 | 00000 | ||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
| 5 | 5/8" | Steel | 9611K17 | 00000 | ||
| 6 | 3/4" | Steel | 9611K18 | 00000 | ||
 |
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Tooth-Lock Washer
 |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 9605K21 | 00000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 9605K22 | 0000 | ||
| 2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 9605K23 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 50 | 9605K24 | 00000 | ||
| 4 | 0.295" | 1/2" | 1.05" | 0.374" | Yes | NASM16491 | 50 | 9605K25 | 00000 | ||
| 5 | 0.251" | 5/8" | 1.22" | 0.33" | Yes | NASM16491 | 25 | 9605K26 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 0 | 0.101" | 1/4" | 0.545" | 0.175" | Yes | NASM16491 | 50 | 9604K31 | 0000 | ||
| 1 | 0.108" | 9/32" | 0.687" | 0.185" | Yes | NASM16491 | 50 | 9604K32 | 00000 | ||
| 2 | 0.141" | 3/8" | 0.815" | 0.215" | Yes | NASM16491 | 50 | 9604K33 | 00000 | ||
| 3 | 0.219" | 7/16" | 0.97" | 0.295" | Yes | NASM16491 | 25 | 9604K34 | 0000 | ||
|
Hammer-Driven Installation Punch |
|
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 0 | 1/4" | — | 9612K26 | 000000 | ||
| 1 | 9/32" | — | 9612K27 | 00000 | ||
| 2 | 3/8" | — | 9612K28 | 00000 | ||
| 3 | 7/16" | — | 9612K29 | 00000 | ||
| 4 | 1/2" | — | 9612K31 | 00000 | ||
| 5 | 5/8" | — | 9612K32 | 00000 | ||
Hammer-Driven Cutting Punch | ||||||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
| 5 | 5/8" | Steel | 9611K17 | 00000 | ||
|
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Reinforcing Fabric Grommets
Extended-Neck Washer
 |
An extended neck gives these washers a stronger hold than our other fabric grommets.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K31 | 00000 | ||
| 0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K32 | 00000 | ||
| 1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K33 | 00000 | ||
| 2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K34 | 00000 | ||
| 3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 8271K35 | 00000 | ||
| 4 | 0.296" | 1/2" | 1.05" | 0.374" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 8271K36 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 00 | 0.062" | 3/16" | 0.425" | 0.135" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K35 | 0000 | ||
| 0 | 0.102" | 1/4" | 0.545" | 0.175" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K36 | 0000 | ||
| 1 | 0.112" | 9/32" | 0.687" | 0.185" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K37 | 00000 | ||
| 2 | 0.139" | 3/8" | 0.815" | 0.215" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9604K38 | 00000 | ||
| 3 | 0.218" | 7/16" | 0.97" | 0.295" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9604K39 | 00000 | ||
|
Hammer-Driven Installation Punch |
|
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 00 | 3/16" | — | 9612K25 | 000000 | ||
| 0 | 1/4" | — | 9612K26 | 00000 | ||
| 1 | 9/32" | — | 9612K27 | 00000 | ||
| 2 | 3/8" | — | 9612K28 | 00000 | ||
| 3 | 7/16" | — | 9612K29 | 00000 | ||
| 4 | 1/2" | — | 9612K31 | 00000 | ||
Hammer-Driven Cutting Punch | ||||||
| 00 | 3/16" | Steel | 9611K11 | 00000 | ||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
|
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Rolled Rim with Tooth-Lock Washer
 |
Teeth grip the fabric for an even stronger hold than other reinforcing fabric grommets. Use these washers for fabric under the highest strain, such as a tarp secured by bungee cords.
Brass—Add a bright finish to your fabric.
Nickel-Plated Brass—The nickel gives these a more muted, silvery look than our other brass grommets.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Pkg. Qty. | Pkg. | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | |||||||||||
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9606K41 | 000000 | ||
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | AN230, MIL-G-16491, NASM20230 | 50 | 9606K42 | 00000 | ||
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9606K43 | 00000 | ||
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9606K44 | 00000 | ||
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | AN230, MIL-G-16491, NASM20230 | 25 | 9606K45 | 00000 | ||
| 5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | AN230, MIL-G-16491, NASM20230 | 10 | 9606K46 | 0000 | ||
| 6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | AN230, MIL-G-16491, NASM20230 | 5 | 9606K47 | 0000 | ||
| 7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | AN230, MIL-G-16491, NASM20230 | 5 | 9606K48 | 00000 | ||
| 8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | AN230, MIL-G-16491, NASM20230 | 5 | 9606K49 | 00000 | ||
Nickel-Plated Brass | |||||||||||
| 0 | 0.096" | 9/32" | 0.67" | 0.175" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 50 | 87995K51 | 00000 | ||
| 1 | 0.126" | 13/32" | 0.79" | 0.205" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 87995K52 | 00000 | ||
| 2 | 0.174" | 7/16" | 0.89" | 0.255" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 87995K53 | 00000 | ||
| 3 | 0.172" | 15/32" | 0.97" | 0.255" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 25 | 87995K54 | 00000 | ||
| 4 | 0.237" | 9/16" | 1.12" | 0.32" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 10 | 87995K55 | 0000 | ||
| 5 | 0.296" | 5/8" | 1.285" | 0.38" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 10 | 87995K56 | 00000 | ||
| 6 | 0.332" | 3/4" | 1.535" | 0.42" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 5 | 87995K57 | 0000 | ||
| 7 | 0.363" | 29/32" | 1.725" | 0.446" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 5 | 87995K58 | 00000 | ||
| 8 | 0.382" | 1 3/32" | 1.865" | 0.465" | Yes | AN230, MIL-G-16491, NASM16491, NASM20230 | 5 | 87995K59 | 00000 | ||
|
Hammer-Driven Installation Punch |
|
Hammer-Driven Cutting Punch |
For Grommet Trade Size | For Hole Dia. | Material | Each | |||
|---|---|---|---|---|---|---|
Hammer-Driven Installation Punch | ||||||
| 0 | 9/32" | — | 9612K17 | 000000 | ||
| 1 | 13/32" | — | 9612K18 | 00000 | ||
| 2 | 7/16" | — | 9612K19 | 00000 | ||
| 3 | 15/32" | — | 9612K21 | 00000 | ||
| 4 | 9/16" | — | 9612K22 | 00000 | ||
| 5 | 5/8" | — | 9612K23 | 00000 | ||
| 6 | 3/4" | — | 9612K24 | 00000 | ||
| 7 | 29/32" | — | 9612K35 | 000000 | ||
| 8 | 1 3/32" | — | 9612K36 | 000000 | ||
Hammer-Driven Cutting Punch | ||||||
| 0 | 1/4" | Steel | 9611K12 | 00000 | ||
| 1 | 9/32" | Steel | 9611K13 | 00000 | ||
| 2 | 3/8" | Steel | 9611K14 | 00000 | ||
| 3 | 7/16" | Steel | 9611K15 | 00000 | ||
| 4 | 1/2" | Steel | 9611K16 | 00000 | ||
| 5 | 5/8" | Steel | 9611K17 | 00000 | ||
| 6 | 3/4" | Steel | 9611K18 | 00000 | ||
| 7 | 7/8" | Steel | 9611K19 | 00000 | ||
| 8 | 1" | Steel | 9611K21 | 00000 | ||
|
Manual Press |
Throat | |||||||
|---|---|---|---|---|---|---|---|
Max. Opening | Dp. | Wd. | Material | Each | |||
Manual Press | |||||||
| 7/8" | 3 1/4" | 1 3/4" | Aluminum | 95720A690 | 0000000 | ||
Fabric Grommet Kits
Standard Washer
|  |
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Includes | No. of Grommets | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | ||||||||||||
| 0 | 0.1" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K31 | 000000 | ||
| 1 | 0.1" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K32 | 00000 | ||
| 2 | 0.14" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K13 | 00000 | ||
| 3 | 0.21" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 12 | 9610K34 | 00000 | ||
| 4 | 0.29" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 12 | 9610K35 | 00000 | ||
Tooth-Lock Washer
| |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Grommet Trade Size | For Max. Material Thk. | ID | Flange Dia. | Dp. Under Flange | For Use Outdoors | Mil. Spec. | Includes | No. of Grommets | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass | ||||||||||||
| 0 | 0.11" | 1/4" | 0.545" | 0.175" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 48 | 9610K16 | 000000 | ||
| 1 | 0.12" | 9/32" | 0.687" | 0.185" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 48 | 9610K17 | 00000 | ||
| 2 | 0.15" | 3/8" | 0.815" | 0.215" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K18 | 00000 | ||
| 3 | 0.23" | 7/16" | 0.97" | 0.295" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K19 | 00000 | ||
| 4 | 0.3" | 1/2" | 1.05" | 0.374" | Yes | MIL-G-16491 | Cutting Block, Cutting Punch, Die Set, Installation Punch | 24 | 9610K21 | 00000 | ||
Self-Piercing Fabric Grommets
Standard Washer
 |
Grommets with trade size 0, 1, and 2 require a die set adapter for installation.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
Tooth-Lock Washer
 |
Teeth grip the fabric for a stronger hold than standard washers.
Brass—Add a bright finish to your fabric.
Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
