Nipples for Neon | McMaster-Carr

Clear All

	For Use With For Use With	Show

Neon

	For Use With For Use With	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

Dichlorotetrafluoroethane

Silicon Tetrafluoride

Tungsten Hexafluoride

	Type Type


Adapter	Nut

	Maximum Pressure Maximum Pressure

	Connects To Connects To

Tank

Regulator

	CGA Number CGA Number

022
032
033
170
180
320
346
350
500
510
540
555
580
590
677
680
695
702
703

	Pipe Size Pipe Size

1/8

1/4

	Thread Type Thread Type

NGO

NPT

UN/UNF (CGA)

	Gender Gender


Male	Female

	Material Material

Brass

Stainless Steel

	Tighten With Tighten With

Wrench

Hand

	System of Measurement System of Measurement

Inch

	Length Length

	Connection Type Connection Type


Pipe	Hose

	Thread Direction Thread Direction

Right Hand

Left Hand

	Shape Shape

	Straight

	Connection Style Connection Style

Threaded

Barbed

	Thread Size Thread Size

	Maximum Temperature Maximum Temperature

Less than 200° F

	Minimum Temperature Minimum Temperature

Not Rated

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Finish Finish

Chrome Plated

Forward

How can we improve?

44 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

High-Pressure Nipples for Compressed Gas

Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut (sold separately) so you can make a threaded connection.

Brass nipples have good corrosion resistance and are softer than 316 stainless steel nipples, so they're easier to thread together. Chrome-plated brass nipples have better corrosion and wear resistance than unplated brass nipples and have a bright, shiny appearance. 316 stainless steel nipples have excellent corrosion resistance.

Nipples with filter help keep the line clean by preventing small particles and other impurities from entering your pressure regulator.

Nipples that tighten by hand should be paired with a nut with a plastic grip.

For technical drawings and 3-D models, click on a part number.

Nipples, Tank × Male Regulator

Maximum Pressure: See table
Maximum Temperature: 120° F

	Regulator Connection
For Number (Max. Pressure)	Pipe Size	Thread Type	Lg.	For Use With	Features		Each
Brass—Tighten With Wrench
CGA 170 (3,000 psi @ 72° F)	1/8	NPT	1 1/4"	Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene	__	000000000	000000
CGA 180 (3,000 psi @ 72° F)	1/8	NPT	2"	Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene	__	000000000	00000
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F)	1/4	NPT	2 1/2"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	__	000000000	0000
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F)	1/4	NPT	3"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	__	000000000	0000
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F)	1/4	NPT	3 1/2"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	__	000000000	0000
CGA 680, 695 (3,000 psi @ 72° F); CGA 702, 703 (4,700 psi @ 72° F)	1/4	NPT	3"	Air, Argon, Flammable Gases, Helium, Hydrogen, Krypton, Methane, Natural Gas, Neon, Nitrogen, Xenon	__	000000000	00000
CGA 680, 695 (3,000 psi @ 72° F); CGA 702, 703 (5,500 psi @ 72° F)	1/4	NPT	3 1/64"	Air, Argon, Flammable Gases, Helium, Hydrogen, Krypton, Methane, Natural Gas, Neon, Nitrogen, Xenon	Filter	000000000	00000
BS 341 No. 3 (4,350 psi @ 72° F)	1/4	NPT	2 1/2"	Air, Argon, Helium, Krypton, Neon, Nitrogen, Oxygen, Perfluoropropane	__	000000000	00000
Brass—Tighten By Hand
CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F)	1/4	NPT	3 33/64"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	__	000000000	00000
Chrome-Plated Brass—Tighten With Wrench
CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F)	1/4	NPT	3 1/2"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	__	000000000	00000
316 Stainless Steel—Tighten With Wrench
CGA 677 (6,400 psi @ 72° F)	1/4	NPT	2 1/2"	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	__	000000000	00000

Nuts

Female Nut

Male Nut

Maximum Pressure: See table
Maximum Temperature: 120° F

Brass
Number	Gender	Thread Size	Pipe Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
CGA 500	Male	0.880"-14	__	NGO	Right Hand	3,000 psi @ 72° F	Medical Gas Mixtures	000000000	000000
CGA 510	Male	0.880"-14	__	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	0000
CGA 580	Male	0.960"-14	__	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	0000
CGA 590	Male	0.960"-14	__	NGO	Left Hand	3,000 psi @ 72° F	Sulfur Hexafluoride	000000000	0000
CGA 680	Male	1.040"-14	__	NGO	Right Hand	4,700 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
CGA 702	Male	1.120"-14	__	NGO	Right Hand	6,400 psi @ 72° F	Air	000000000	00000
Brass with Plastic Grip
CGA 510	Male	0.880"-14	__	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	00000
CGA 580	Male	0.960"-14	__	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
Aluminum-Plated Brass
CGA 170	Female	9/16"-18	__	UN/UNF (CGA)	Right Hand	3,000 psi @ 72° F	Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene	000000000	0000
CGA 180	Female	5/8"-18	__	UN/UNF (CGA)	Right Hand	3,000 psi @ 72° F	Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene	000000000	00000
BS 341 No. 3	Male	__	5/8	BSPT	Right Hand	3,000 psi @ 72° F	Air, Argon, Helium, Krypton, Neon, Nitrogen, Oxygen, Perfluoropropane	000000000	00000
Chrome-Plated Brass
CGA 510	Male	0.880"-14	__	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	00000
CGA 580	Male	0.960"-14	__	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
CGA 590	Male	0.960"-14	__	NGO	Left Hand	3,000 psi @ 72° F	Sulfur Hexafluoride	000000000	00000
316 Stainless Steel
CGA 677	Female	1.035"-14	__	NGO	Left Hand	6,400 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000

High-Pressure Threaded Fittings for Compressed Gas

Designed to handle high-pressure welding applications, these fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.

Fittings with left-hand threads are identified with a notch in the nut.

Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.

For technical drawings and 3-D models, click on a part number.

Female Tank × Female Regulator

Maximum Pressure: See table
Maximum Temperature: 120° F

CGA Number		Tank Connection			Regulator Connection
Tank	Regulator	Thread Size	Thread Type	Thread Direction	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
Brass
320	580	0.830"-14	NGO	Right Hand	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Carbon Dioxide, Helium, Krypton, Neon, Nitrogen, Xenon	0000000	000000
346	580	0.830"-14	NGO	Right Hand	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Air, Argon, Helium, Krypton, Neon, Nitrogen, Xenon	0000000	00000
350	580	0.830"-14	NGO	Left Hand	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Carbon Monoxide, Ethane, Ethylene, Helium, Hydrogen, Krypton, Methane, Methyl Fluoride, Natural Gas, Neon, Nitrogen, Xenon	0000000	00000
540	580	0.908"-14	NGO	Right Hand	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Oxygen, Xenon	0000000	00000

Male Tank × Male Regulator

Maximum Pressure: See table
Maximum Temperature: 120° F

CGA Number		Tank Connection			Regulator Connection
Tank	Regulator	Thread Size	Thread Type	Thread Direction	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
Brass
580	320	0.960"-14	NGO	Right Hand	0.830"-14	NGO	Left Hand	3,000 psi @ 72° F	Argon, Carbon Dioxide, Helium, Krypton, Neon, Nitrogen, Xenon	0000000	000000
580	346	0.960"-14	NGO	Right Hand	0.830"-14	NGO	Left Hand	3,000 psi @ 72° F	Air, Argon, Helium, Krypton, Neon, Nitrogen, Xenon	0000000	00000
580	350	0.960"-14	NGO	Right Hand	0.830"-14	NGO	Left Hand	3,000 psi @ 72° F	Argon, Carbon Monoxide, Ethane, Ethylene, Helium, Hydrogen, Krypton, Methane, Methyl Fluoride, Natural Gas, Neon, Nitrogen, Xenon	0000000	00000
580	540	0.960"-14	NGO	Right Hand	0.908"-14	NGO	Left Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Oxygen, Xenon	0000000	00000
580	555	0.960"-14	NGO	Right Hand	0.908"-14	NGO	Left Hand	3,000 psi @ 72° F	Argon, Butane, Helium, Krypton, LP Gas, Neon, Nitrogen, Xenon	0000000	00000

Male Tank × Female Regulator

Maximum Pressure: 3,000 psi @ 72° F
Maximum Temperature: 120° F

CGA Number		Tank Connection			Regulator Connection
Tank	Regulator	Thread Size	Thread Type	Thread Direction	Thread Size	Thread Type	Thread Direction	For Use With		Each
Brass
590	580	0.960"-14	NGO	Left Hand	0.960"-14	NGO	Right Hand	Argon, Helium, Krypton, Neon, Nitrogen, Sulfur Hexafluoride, Xenon	0000000	000000

Nuts for High-Pressure Nipples for Compressed Gas

Slide a high-pressure hose nipple for compressed gas into one of these nuts to connect a pipe to the inlet of a pressure regulator. They are also known as CGA (Compressed Gas Association) nuts and inlet nuts.

Brass nuts have good corrosion resistance and are softer than 316 stainless steel nuts, so they're easier to thread together. Aluminum-plated brass nuts have better corrosion and wear resistance than unplated brass. 316 stainless steel nuts have excellent corrosion resistance.

Nuts with left-hand threads are identified with a notch.

Note: Nuts have a CGA, BS, or DIN number that corresponds to a specific type of gas. Choose a nut with the same number as your tank and other system components.

For technical drawings and 3-D models, click on a part number.

Female

Female Nut

Maximum Pressure: See table
Maximum Temperature: 120° F, except DIN 477 No. 9: 250° F

Aluminum-Plated Brass
Number	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
CGA 170	9/16"-18	UN/UNF (CGA)	Right Hand	3,000 psi @ 72° F	Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene	000000000	00000
CGA 180	5/8"-18	UN/UNF (CGA)	Right Hand	3,000 psi @ 72° F	Air, Argon, Butane, Carbon Dioxide, Helium, Krypton, Methane, Natural Gas, Neon, Nitrogen, Oxygen, Propane, Propylene	000000000	00000
316 Stainless Steel
CGA 677	1.035"-14	NGO	Left Hand	6,400 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000

Threaded Hose Fittings for Compressed Gas

Use these fittings to connect welding hose to pressure regulators and torches. They are also known as CGA (Compressed Gas Association) fittings. Fittings are brass for good corrosion resistance.

Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.

For technical drawings and 3-D models, click on a part number.

Straight Adapters, Male Hose

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F

Brass
CGA Number	Gas Fitting Size	Thread Size	Thread Type	Thread Direction	For Use With		Each
032 x 022	B	5/8"-18 x 9/16"-18	UN/UNF (CGA)	Right Hand	Argon, Helium, Krypton, Neon, Nitrogen, Oxygen, Xenon	0000000	000000

Straight Adapters, Male Hose × Male Pipe

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F

Male Hose Connection					Male Pipe Connection
CGA Number	Gas Fitting Size	Thread Size	Thread Type	Thread Direction	Pipe Size	Thread Type	Thread Direction	For Use With		Each
Brass
032	B	5/8"-18	UN/UNF (CGA)	Right Hand	1/4	NPT	Right Hand	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	0000000	000000

Barbed Hose Fittings for Compressed Gas

Commonly used in low-pressure welding applications, these fittings connect downstream of your tank and pressure regulator. Slide the barbed end into rubber hose and secure with a crimp-on hose ferrule. Fittings are brass for good corrosion resistance.

Adapters let you adapt to a threaded end so you can connect welding hose to torches or pressure regulators. They consist of a barbed shaft with a rounded end that sits inside a threaded CGA nut (sold separately) so you can make a threaded hose connection.

For technical drawings and 3-D models, click on a part number.

Straight Adapters, Barbed Hose × Threaded Hose

Maximum Pressure: 200 psi @ 72° F
Maximum Temperature: 120° F
Attachment Type: Use Crimp-On Hose Ferrules

Adapters						Nuts with Right-Hand Threads			Nuts with Left-Hand Threads
For Hose ID	For CGA Number	Gas Fitting Size	For Use With		Each	CGA Number		Each	CGA Number		Each
Brass
1/8"	032, 033	B	Air, Argon, Helium, Krypton, Neon, Nitrogen, Water, Xenon	0000000	00000	032	0000000	00000	033	0000000	00000
3/16"	032, 033	B	Air, Argon, Helium, Krypton, Neon, Nitrogen, Water, Xenon	0000000	0000	032	0000000	0000	033	0000000	0000
1/4"	032, 033	B	Air, Argon, Helium, Krypton, Neon, Nitrogen, Water, Xenon	0000000	0000	032	0000000	0000	033	0000000	0000
3/8"	032, 033	B	Air, Argon, Helium, Krypton, Neon, Nitrogen, Water, Xenon	0000000	0000	032	0000000	0000	033	0000000	0000