How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Pressure Plated Brass Threaded Pipe Nipples and Pipe
The plating on this pipe creates a shiny finish and provides extra protection in corrosive environments. It has the strength to handle high-pressure applications.
Nickel-plated brass pipe provides better corrosion resistance than unplated brass.
Fully threaded pipe is also known as a close nipple; it is threaded on each end to the center.
Universal threads have a Buna-N rubber gasket to protect against leaks.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Natural Gas, Oil, Water
Nickel-Plated Brass | |||||
|---|---|---|---|---|---|
| Thread Size  | Lg. | Hex Wd. | Max. Pressure | Each | |
Metric | |||||
| M3 | 3/8" | 3/16" | 1,080 psi @ 72° F | 00000000 | 00000 |
Nickel-Plated Brass Low-Pressure Barbed Tube Fittings for Air and Water
The nickel plating on these brass fittings provides extra protection against corrosive environments. The plating won’t peel or chip, so the fittings keep a bright, polished appearance. The barbs grip onto tubing, providing a secure hold with no clamp required.
Metric male threads have a fiber gasket or O-ring for a tight seal.
For technical drawings and 3-D models, click on a part number.
(SAE Straight) and BSPP
Male Threads with Gasket
- Temperature Range: -40° to 230° F,
except UN/UNF (SAE Straight) Threads: -20° to 160° F - Tubing: Use with hard (Durometer 60D-90D) Buna-N rubber, EVA plastic, Nylon plastic, polyethylene plastic, polypropylene plastic, polyurethane rubber, PTFE plastic, PVC plastic, PVDF plastic, or silicone rubber,
except UN/UNF (SAE Straight) Threads: Use with firm (Durometer 85A) polyurethane rubber
Aluminum Low-Pressure Barbed Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 75A-60D) EVA plastic, polyethylene plastic, polyurethane rubber or PVDF plastic
Made of aluminum, these fittings are lighter in weight than other metal barbed tube fittings and have good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.
Metric, BSPP, and UN/UNF (SAE Straight) male threads have a gasket or O-ring for a tight seal.
For technical drawings and 3-D models, click on a part number.
Choose-a-Color Aluminum Low-Pressure Barbed Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: -40° to 230° F
- Tubing: Use with hard (Durometer 75A-60D) EVA plastic, polyethylene plastic, polyurethane rubber or PVDF plastic
Color-code fittings for easy identification. Fittings are aluminum, which is lightweight with good corrosion resistance. The barb grips onto tubing, providing a secure hold with no clamp required.
Metric and UN/UNF (SAE Straight) male threads have a gasket for a tight seal.
For technical drawings and 3-D models, click on a part number.
Stainless Steel High-Pressure Barbed Tube Fittings for Air and Water
- Temperature Range: See table
- Tubing: Use with firm (Durometer 75A-95A) EVA plastic, polyethylene plastic, polypropylene plastic or PVC plastic
Fittings withstand pressures up to 250 psi. They are 303 stainless steel for very good corrosion resistance.
Metric, BSPP, and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks.
For technical drawings and 3-D models, click on a part number.
UN/UNF (SAE Straight)
Male Threads with Gasket
| For Tube ID | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Temp. Range, °F | Number of Barbs | Each | |
Metric Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1mm | M3 | 0.5 | 303 Stainless Steel | Viton® Fluoroelastomer Rubber | 250 psi @ 72° F | -40° to 500° F | Single | 00000000 | 000000 |
| 2mm | M3 | 0.5 | 303 Stainless Steel | Viton® Fluoroelastomer Rubber | 250 psi @ 72° F | -40° to 500° F | Single | 00000000 | 00000 |
| 4mm | M3 | 0.5 | 303 Stainless Steel | Viton® Fluoroelastomer Rubber | 250 psi @ 72° F | -40° to 500° F | Single | 00000000 | 00000 |