Lining Material Lining Material |
---|
|
Application Application |
---|
|
Garment Garment |
---|
|
|
Flame-Resistant Application Flame-Resistant Application |
---|
|
Arc Rating Arc Rating |
---|
|
Cuff Style Cuff Style |
---|
|
Closure Type Closure Type |
---|
|
Specifications Met Specifications Met |
---|
|
Coverall Style Coverall Style |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Gender Gender |
---|
|
For Heat Exposure Type For Heat Exposure Type |
---|
|
More
More
Protect your torso and thighs when welding.
Carbon/aramid blend protects against radiant heat, flames, and welding sparks, while providing better breathability than leather. It is stitched with Nomex threads for added durability. These aprons have an adjustable waist strap with a buckle for a quick release.
Material | Lg. | Wd. | Closure Type | Features | Color | Size | Each | |
Carbon/Aramid Fabric Blend | 36" | 24" | Buckle | Adjustable Waist Strap | Black | One Size | 0000000 | 000000 |
These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting.
Nomex aramid is heavier than PBI, yet breathable and moisture wicking.
Material | Specifications Met | Color | Size | Each | |
Nomex Aramid Fabric | NFPA 1971 | White | One Size | 00000000 | 000000 |
These suits meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These suits are made of PVC-coated Nomex aramid. Jackets have snaps down the front and a storm flap to keep rain out. Sleeves have hook and loop cuffs; tighten to fit your wrist or expand to wear over gloves. The bib overalls have adjustable suspenders to modify the length.
When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.
Available Sizes | |||
---|---|---|---|
Size | Chest Size | Waist Size | Inseam Lg. |
S | 46" | 42" | 28" |
M | 50" | 46" | 29" |
L | 54" | 50" | 30" |
XL | 58" | 54" | 31" |
2XL | 62" | 58" | 32" |
3XL | 66" | 62" | 32" |
Material | Coating Material | Arc Rating, cal/cm2 | Arc Rated PPE Category | Closure Type | Cuff Style | Specifications Met | Color | Choose a Size | Each | |
Suit | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Nomex Aramid Fabric | PVC Plastic | 14 | 2 | Snaps | Hook and Loop | NFPA 70E, ASTM F2733 | Blue | 0000000 | 0000000 | |
Suit with Detachable Hood | ||||||||||
Nomex Aramid Fabric | PVC Plastic | 14 | 2 | Snaps | Hook and Loop | NFPA 70E, ASTM F2733 | Blue | 0000000 | 000000 |
These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of PVC-coated Nomex aramid. They have snaps down the front and a storm flap to keep rain out. They have hook and loop cuffs; tighten to fit your wrist or gloves.
Fasten a hood (sold separately) to the collar snaps.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.
Available Sizes | ||
---|---|---|
Size | Chest Size | Lg. |
S | 46" | 29" |
M | 50" | 30" |
L | 54" | 31" |
XL | 58" | 31" |
2XL | 62" | 32" |
3XL | 66" | 32" |
These overalls meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These overalls are made of PVC-coated Nomex aramid. They have hook and loop closures on the cuffs and adjustable suspenders to modify the length.
Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.
Available Sizes | ||
---|---|---|
Size | Waist Size | Inseam Lg. |
S | 32"-34" | 28" |
M | 36"-38" | 29" |
L | 40"-42" | 30" |
XL | 44"-46" | 31" |
2XL | 48"-50" | 32" |
3XL | 52"-54" | 32" |
These coveralls meet NFPA 70E standards for protection against electrical arc flashes. Check the personal protection equipment (PPE) category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.
NFPA 2112 rated coveralls protect against flash fires.
Nomex aramid (men's) won’t melt or drip if it catches fire. It resists wear and abrasion better than other materials. It’s arc rated for PPE category 1.
Cotton (men's) is lightweight and provides better breathability than other materials. Coveralls are stitched with Nomex threads for added durability. They are self-extinguishing and arc rated for PPE category 2.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls. Long coveralls have added length in the torso, sleeves, and legs, so they are recommended for workers 6' 1" and taller.
Available Men's Sizes | |
---|---|
Size | Chest Size |
S | 36" |
S | 38" |
M | 42" |
M | 40" |
L | 46" |
L | 44" |
XL | 48" |
XL | 50" |
2XL | 52" |
2XL | 54" |
Available Men's Sizes | |
---|---|
Size | Chest Size |
S | 38" |
M | 42" |
M | 40" |
L | 46" |
L | 44" |
XL | 48" |
XL | 50" |
2XL | 54" |
2XL | 52" |
3XL | 56" |
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and splashes. These coats have no pockets so they won’t trap hot particles. They have snaps down the front and on the cuffs. A flap down the front has pull tabs to allow for quick removal.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance.
When measuring chest size, measure around the fullest part of your chest. Coats are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the coat.
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and splashes. These jackets have no pockets so they won’t trap hot particles. They have snaps down the front and on the cuffs. A flap down the front has pull tabs to allow for quick removal.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance.
When measuring chest size, measure around the fullest part of your chest. Jackets are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the jacket.
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and splashes. These pants have no pockets so they won’t trap hot particles. They have durable leather belt loops, as well as buttons for suspenders. Cuffs are open to fit over boots.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance.
Find your waist size by measuring just above the top of your hip bone. Pants are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the pants.
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and molten metal splashes. These leggings protect your shins and the top of your feet. They have a hook and loop closure to adjust the fit and a pull tab for quick removal.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than rayon. It holds up in higher temperatures than rayon while providing excellent abrasion and cut resistance.
Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and splashes. These aprons have no pockets so they won’t trap hot particles. They have adjustable neck and waist straps to modify the fit. The straps snap on and off so you can remove them quickly.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance.
Lg. | Wd. | Closure Type | Features | Color | Size | Each | |
Carbon/Kevlar Aramid Fabric Blend | |||||||
---|---|---|---|---|---|---|---|
39" | 24" | Snaps | Adjustable Neck Strap, Adjustable Waist Strap | Silver | One Size | 000000 | 000000 |
Protect your neck from heat, sparks, and molten metal splashes. Often used in steel mills and glass plants, these shrouds are made of aluminized material. Use the hook and loop tabs to fasten them to a hard hat (sold separately). They have snaps in the front to close the shroud around the front of your neck.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than rayon. It holds up in higher temperatures than rayon while providing excellent abrasion and cut resistance.
Material | Lg. | Wd. | Closure Type | Attachment Type | Color | Size | Each | |
Carbon/Kevlar Aramid Fabric Blend | 11" | 30" | Snaps | Hook and Loop Tabs | Silver | One Size | 0000000 | 000000 |
Made of aluminized fabric, these gloves reflect radiant heat and protect against sparks and splashes. They protect your hands from intermittent exposure to extreme heat during jobs such as metal forging and glass manufacturing. All of the gloves are aluminized on the back of the cuff, hand, fingers, and thumb.
Kevlar/Nomex aramid blend gloves combine heat-resistant fibers with the excellent abrasion resistance of Kevlar.
Carbon/Kevlar aramid blend gloves are heavyweight gloves that last longer than Kevlar/Nomex aramid blend gloves in comparable service.
Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion. Holding heavy objects may decrease temperature rating.
Nomex aramid gloves are breathable and cool down quickly after removal from a hot surface.
Use gloves with knit cuffs for a secure fit.
Available Sizes | |
---|---|
Size | Glove Size |
L | 9 |
Lg. | Cuff Style | Color | Max. Temp., °F | For Heat Exposure Type | Size | Pair | |
Nomex Aramid Fabric | |||||||
---|---|---|---|---|---|---|---|
11" | Knit | Beige | 700° | Direct | L | 0000000 | 000000 |
Used in firefighting and similar severe duty applications, these fire-retardant gloves meet OSHA, CAL-OSHA, and NFPA requirements. Flexible and durable, they protect your hands in high-temperature applications. Holding heavy objects may decrease temperature rating.
Cowhide gloves remain soft after repeated soakings.
Cowhide and pigskin gloves have cowhide on the back of the glove and pigskin on the palm. Pigskin is more abrasion resistant than cowhide.
Available Sizes | |
---|---|
Size | Glove Size |
S | 7 |
M | 8 |
L | 9 |
XL | 10 |
Lg. | Cuff Style | Color | Max. Temp. | For Heat Exposure Type | Features | Specifications Met | Choose a Size | Pair | |
Cowhide Leather | |||||||||
---|---|---|---|---|---|---|---|---|---|
13" | Knit | Blue | Not Rated | Direct | Nomex Cuff | OSHA Compliant 29 CFR 1910.156; Cal/OSHA Compliant Title 8 Section 3407; NFPA 1971 | 000000 | 000000 | |
Cowhide and Pigskin Leather | |||||||||
13" | Knit | Beige/Gray | Not Rated | Direct | Nomex Cuff | OSHA Compliant 29 CFR 1910.156; Cal/OSHA Compliant Title 8 Section 3407; NFPA 1971 | 000000 | 00000 |
Use these sleeves alone or with gloves to protect your arms from heat.
Nomex aramid sleeves are breathable and cool down quickly after removal from a hot surface. They have knit cuffs for a secure fit.
Lg. | Cuff Style | Color | Max. Temp., °F | For Heat Exposure Type | Size | Pair | |
Nomex Aramid Fabric | |||||||
---|---|---|---|---|---|---|---|
23" | Knit | Off-White | 1300° | Direct | One Size | 000000 | 000000 |
Reinforced seams and fingertips prevent burn-through. Use these gloves to shield your hands from welding sparks and spatter.
Elkskin gloves offer the best dexterity of the welding gloves we carry. They are insulated and remain supple even after repeated exposure to moisture and heat. Import regulations restrict sales to Canada.
Gloves with Kevlar threads have strengthened, flame-resistant seams.
Style E have reinforced palms and wrists for improved wear resistance. They are insulated with flame-resistant Nomex for added heat protection.
Designed for TIG welding, these gloves are thinner than MIG gloves for more flexibility. Use them to shield your hands from welding sparks and spatter.
Kidskin gloves are softer, stronger, and provide more dexterity than goatskin.
Hook and loop cuffs can be adjusted for a snug fit.
Gloves that cannot be sold to Canada are restricted by import regulations.
For protection from low-level arc flash hazards, these kits include several of the necessary safety items in a storage bag. All contents meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All hard hats have a ratchet adjustment with an easy-turn knob.
Style B kits come with coveralls, hard hat, face shield, hood, safety glasses, and two storage bags.When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the coveralls.
Hard Hat | Face Shield | Coverall | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Arc Rating, cal/cm2 | Arc Rated PPE Category | No. of Suspension Points | Material | Hat Size | Lens Material | Lens Ht. | Lens Wd. | Lens Thick. | Material | Choose a Size (Chest Size) | Each | |
8 | 2 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 10" | 11 1/2" | 0.06" | Cotton/Nylon Fabric Blend | 000000 | 0000000 | |
12 | 2 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 10" | 11 1/2" | 0.06" | Cotton/Nylon Fabric Blend | 000000 | 000000 |
Protect your head and neck from extreme heat and splashes. To fit your head, these hoods use an adjustable ratchet suspension. There's enough room inside to wear glasses, goggles, or a respirator.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It combines good heat resistance with excellent abrasion and cut resistance.
Often used in steel mills, foundries, and glass plants, these covers reflect radiant heat and protect against sparks and splashes. They reach mid-calf and have a zipper down the front as well as a flame-resistant cotton lining. A skid-resistant sole grips wet and slippery surfaces for good traction.
Kevlar/Nomex aramid blend combines good heat resistance with excellent abrasion and cut resistance.
Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up better in higher temperatures than other materials while providing excellent abrasion and cut resistance.