No need for a separate handle—these files have one built in.

Curved rows of teeth on both sides clear chips and create a scratch-free finish. Also known as auto-body and milled-tooth files.

Remove material quickly. Also known as American-pattern and machinists’ files.

Remove material quickly. Also known as American-pattern and machinists’ files.

An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet ASTM F1505.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

File slots, keyways, grooves, and corners with these four-sided tools.

These are the hardest, longest-lasting files available, and are strong enough to file hard materials.

Thinner than standard diamond files, these are good for reaching into small slots and narrow spaces.

Thinner than standard diamond files, these are good for reaching into small slots and narrow spaces.

With three filing surfaces, these files work in spots others can't.

File slots, keyways, grooves, and corners with these four-sided tools.

Second only to diamond in hardness, these files last 100 times longer than standard files.

Good for filing holes and concave surfaces.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Remove material quickly. Also known as American-pattern and machinists’ files.

Use on concave, convex, and flat surfaces.

Bend and twist these files to clean contacts in hard-to-reach spots.

A pen-shaped holder stores six files.

The most common shape, use these for general purpose filing.

These files are for frequent use.

The small tip allows precise work in tight spots.

Reach into the smallest holes, grooves, and slots to perform detailed work.

These narrow files are the hardest available, and are strong enough to file hard materials in small holes, grooves, and slots.

Use these extremely hard, long-lasting file sets to remove hard materials from small holes, grooves, and slots.

These file sets last 100 times longer than standard files. Small tips allow you to work in small spaces.

Change the insert to accommodate different files.

A steel insert cuts into file tangs for a secure hold.

These tools are for heavy, continuous use.

A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.

Extend your reach with these 3" to 7¼" long burs.

Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastics without clogging.

Use with blades that have a 0.125" shank and trade numbers with a prefix of E, S, or EX.

These sets include four handles and four blades.

These sets include four handles and four blades.

Use with blades that have a 0.1" shank and trade numbers with a prefix of B.

Carry these slim-handled tools comfortably in your pocket.

These blades hold up against repeated use better than standard deburring blades.

These blades are titanium nitride (TiN) coated for wear resistance.

Also known as machinist's scrapers, these tools remove material and smooth edges on a workpiece.

A clamp lets you change the length of the blade.

Remove burs from both sides of sheet metal edges.

Smooth the edges of cut conduit and screw in fittings with a single hand tool.

Extend your reach with these 6 1/4" to 7" long burs.

Power troublesome burrs off of thin-wall (EMT) conduit and attach fittings in less time than traditional hand tools. These bits have a 1/4" hex shank that fits quick-change drill chucks and power screwdrivers to quickly deburr the inside and outside edges of conduit in a single step.

Each of these sets comes with four differently shaped stones.

Remove surface scale left by the EDM (electrical discharge machining) process.

The abrasive is specially treated for use on high-grade mold steels such as P-20, H-13, and 420 stainless steel.

The abrasive is specially treated for use on aluminum, brass, bronze, and other soft metal molds and dies.

The reservoir in the base keeps the stone clean and oiled.

Quickly sharpen straight-blade tools.

A different grit on each side enables multistep sharpening with one stone.

Diamond particles embedded in the steel sharpen while straightening knife edges.

The backing cushions the abrasive to prevent gouging your work surface.

Attach a 1" wide sanding sheet to create your own file.

The abrasive in these blocks wears evenly to maintain a flat surface. They can be used to remove burrs from metal die fixtures and machine parts or to clean magnetic chucks.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Mount with screws or tape.

Place these holders on a table or counter top, then relocate them as you see fit.

Organize your documents with these tabbed dividers.

Display time cards and badges of varying or nonstandard widths.

Compartments provide storage for papers and writing utensils.

Place these on top of a machine or table, then relocate them as you see fit.

These binders mount to machines, equipment, and walls.

These binders hold 6" to 12" of pages for displaying reference books and catalogs.

Display your own business cards in trays or store other people’s cards in rotary holders.

No need to call a locksmith—these sets include extractor picks to pull broken key stubs out of lock cylinders.

Restore bolt, hole, pipe, and conduit threading with this set of four files.

Repair rusted and damaged threads in pipe and conduit. These files are for use in most hole diameters.

Multiple files and handles are included in these sets.

An economical way to determine the hardness of steel on the Rockwell C-scale.

These testers use an indenter to measure hardness.

Measure the hardness of flat materials, such as plastic, rubber, and laminate.

Determine the hardness of very hard steel.