Made of beryllium copper that is FM approved, these keys help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They turn fasteners from either end and reach into tight spots.

For use in applications where a magnetized tool can cause damage, these screwdrivers have a titanium shaft.

These assorted screwdrivers are made of beryllium copper that is FM approved. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

A scaled-down version of standard nutdrivers, these tools are shorter, slimmer, and easy to take with you.

Use these ceramic-tipped screwdrivers for adjusting sensitive electronic components such as capacitors and resistors. They're completely nonconductive and nonmagnetic so there's no risk of short-circuiting or creating magnetic interference. Remove and replace the shafts to use a different size or drive style.

The tip can be replaced when it becomes worn. These tools have a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They are also known as railroad wrenches.

Slide a different shaft into one of three handles to change tip size or drive style.

Made of aluminum-bronze that is Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These tools are often used for lifting and aligning machinery or to separate pipe flanges. Also known as banana wedges.

When one side wears out, use the other one.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to pull, bend, and cut wire.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Solder won’t stick to these tweezers. Made of titanium for high strength and durability, they are nonmagnetic and have excellent corrosion resistance.

Each style of tweezer is a different color for easy identification.

Sets include an assortment of general purpose tweezers for gripping a variety of objects.

Prevent buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The cushioned grips drain static from your application and provide comfort and heat protection.

Prevent buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The cushioned grips drain static from your application. These premium tweezers are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Sets include an assortment of premium tweezers that are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Extend the life of these tweezers by replacing the tips when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components.

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to extract material from tight spots.

Made of beryllium copper that is FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of materials that are FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of beryllium copper that is FM approved, these blades satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Spread adhesive, thinset, and other hard-to-clean materials without scratching your surface and then simply throw these knives away.

Made of aluminum-bronze that is FM approved, these chisels satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of materials that are Factory Mutual approved, these knives inhibit sparking, resist corrosion, and are nonmagnetic.

The blade is nonsparking with a beveled edge for removing thin coatings.

Scrape, cut, and spread material in your food-processing facility with these putty knives—they’re FDA compliant for direct contact with food. Made from plastic, they won’t scratch metal surfaces or corrode from chemicals.

FM approved for use in hazardous environments, these nonmagnetic, corrosion-resistant aluminum-bronze chisels inhibit sparking.

The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use them to drive and remove nails.

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.

The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking, resist corrosion, and are nonmagnetic. All are suitable for driving chisels and striking work without damaging its surface.

The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface.

Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

No handle means precise control for tapping work into position. These hammers can be used in tight spaces where standard hammers don't have room to swing.

Replace faces on a compatible hammer or mallet head or switch to a face with a different hardness.

Made of beryllium copper that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking.

These spatulas have flexible blades.

Made of aluminum-bronze that is Factory Mutual approved, these pick heads inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made of aluminum-bronze with a fiberglass handle, these handles inhibit sparking.

Made of aluminum-bronze that is Factory Mutual approved, these shovels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.