These metric nuts resist oil, grease, and solvents (except mineral acids).

Fiberglass nuts are stronger than nylon 6/6 nuts. They resist acids, solvents, salt water, and oil.

PTFE nuts withstand temperatures up to 500° F. They resist oil, grease, detergents, and most mineral acids. They're the lowest friction plastic nuts we offer, so they thread on smoothly.

PVC nuts resist acids, alkalies, salt solutions, and alcohol.

Stronger than PTFE nuts and resistant to solvents, bases, and acids—including hydrochloric and nitric acid—these PVDF nuts are often used in chemical processing equipment.

Ceramic nuts won't melt, seize, or become brittle—even at temperatures up to 3000° F.

These nylon flange locknuts form threads as they're tightened to resist vibration.

Plastic coupling nuts are chemical resistant, nonconductive, and lightweight.

These metric nylon 6/6 cap nuts are chemical resistant, nonconductive, and lightweight.

Made from nylon 6/6, these metric wing nuts are chemical resistant, nonconductive, and lightweight.

These nylon thumb nuts are chemical resistant, nonconductive, and lightweight.

These nylon nuts are chemical resistant, nonconductive, and lightweight.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.

These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.

Protect components from electrical charges.

Secure the self-tapping female connection with a screw; the other end snaps snugly into a panel, yet can be released for repairs and upgrades.

Both ends snap and lock in place for a permanent connection.

Wings add tension to strengthen the hold in a hole. The other end is releasable for repairs and upgrades.

The ends of these removable supports snap in and compress between panels to reduce vibration of miniature cooling fans in compact electronics.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.

Also known as single-start and self-locking lead screws and nuts, these have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest.

To build a custom knob or thumb screw, pair one of these knobs with a hex or socket head screw. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Use these nuts with plastic compression fittings to create a seal on plastic tubing. They're moisture-resistant acetal, so they won't absorb water and soften, even in high-humidity environments.

Use these nuts and sleeves with compression fittings for food and beverage to create a seal on plastic tubing.

Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.

Add push-in cable holder to this adapter to mount cable to DIN rail.

Keep individual wires separate by laying them between the coils on these holders.

Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Rated to 300° F, these connectors are an excellent choice for use in high-temperature applications such as HID lighting and electric heat.

Grip the wings on these connectors to increase leverage when tightening.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Press down on the clamp to connect wires and pull it up to disconnect.

A plastic cover fully insulates these splices and is clear so you can visually confirm the connection.

Visually confirm your connection through the inspection window in the insulation of these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

Filled with grease, these splices resist moisture and corrosion.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

Pierce the insulation of wire without stripping it to make quick connections that are also sealed to keep out water.

A plastic cover fully insulates these splices and it's clear so you can visually confirm the connection.

Make watertight connections for underground applications.

Sealed threads make these splices weather resistant.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Tap and splice multiple wires in temporarily wet environments and up to six feet underground.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Connect a tap wire to a main wire without stripping—these wire taps penetrate insulation.

Filled with gel, these wire taps seal out moisture.