Thread Size Thread Size |
|---|
Thread Type Thread Type |
|---|
|
Nut Type Nut Type |
|---|
 | Flange |
 | Externally Threaded |
 | Round |
Travel Distance per Turn Travel Distance per Turn |
|---|
|
|
|
Material Material |
|---|
|
Thread Direction Thread Direction |
|---|
 |  |
| Right Hand | Left Hand |
Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
External Thread Size External Thread Size |
|---|
|
|
Selecting Compatible Lead Screws and Nuts
More
Metric Ultra-Precision Lead Screws and Nuts
Operating with less backlash (play) than Metric Precision Acme Lead Screws and Nuts, these provide increased nut life and more reliable movement in automated systems. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won't unexpectedly move when the lead screw is at rest. To ensure compatibility, select components that have the same thread type and thread size.
Nuts are acetal plastic; they have good wear and corrosion resistance.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
External Thread | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Lg. | Dia. | Hex Wd. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn, mm | Size | Lg. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | ||
Acetal Plastic | ||||||||||||||||
| A | M2 | 0.5 | 11/16" | 0.297" | 7/16" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.5 | 3/8"-24 | 3/16" | 8,000 | 10 | -40° to 185° | 0000000 | 000000 |
| A | M4 | 0.3 | 11/16" | 0.297" | 7/16" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.3 | 3/8"-24 | 3/16" | 8,000 | 25 | -40° to 185° | 0000000 | 00000 |
| A | M8 | 1.5 | 1" | 0.548" | 11/16" | 1 | Metric Rounded Trapezoidal | 1:1 | 1.5 | 5/8"-18 | 1/4" | 8,000 | 75 | -40° to 185° | 0000000 | 00000 |
Flange | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Pitch, mm | Lg. | Dia. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn, mm | Mounting Hole Ctr.-to-Ctr. | Bolt Circle Dia. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | ||
Acetal Plastic | |||||||||||||||||||
| B | M2 | 0.5 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.5 | 39/64" | __ | 8,000 | 10 | -40° to 185° | 0000000 | 000000 |
| B | M4 | 0.3 | 1/2" | 0.297" | __ | 3/4" | 13/32" | 1/8" | 1 | Metric Rounded Trapezoidal | 1:1 | 0.3 | 39/64" | __ | 8,000 | 25 | -40° to 185° | 0000000 | 00000 |
| C | M8 | 1.5 | 3/4" | 0.548" | 1 1/8" | __ | __ | 3/16" | 1 | Metric Rounded Trapezoidal | 1:1 | 1.5 | __ | 7/8" | 8,000 | 75 | -40° to 185° | 0000000 | 00000 |
Fast-Travel Ultra-Precision Lead Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. Operating with less backlash (play) than Precision Acme Lead Screws and Nuts, these lead screws and nuts provide increased nut life and more reliable movement in automated systems. All components are corrosion resistant for use in harsh environments. To ensure compatibility, select components that have the same thread type, thread size, and number of thread starts.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange nuts with wear-compensating internal O-ring or wear-compensating spring maintain a tight fit even when their threads begin to wear.
Flange | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn | Mounting Hole Ctr.-to-Ctr. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Each | ||
Acetal Plastic | |||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | Rounded Acme | 2:1 | 0.096" | 39/64" | Not Rated | 25 | 0000000 | 000000 |
| A | 5/32"-21.3 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | Rounded Acme | 2:1 | 0.094" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
| A | 3/16"-42.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 16 | Rounded Acme | 16:1 | 0.375" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 4 | Rounded Acme | 4:1 | 0.192" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
Acetal Plastic with Wear-Compensating Internal O-Ring | |||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | Rounded Acme | 2:1 | 0.096" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 5/32"-21.3 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 2 | Rounded Acme | 2:1 | 0.094" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 3/16"-42.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 16 | Rounded Acme | 16:1 | 0.375" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 4 | Rounded Acme | 4:1 | 0.192" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
Ultra-Precision Lead Screws and Nuts
Operating with less backlash (play) than Precision Acme Lead Screws and Nuts, these provide increased nut life and more reliable movement in automated systems. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. All components are corrosion resistant for use in harsh environments. To ensure compatibility, select components that have the same thread type and thread size.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Flange nuts with wear-compensating internal O-ring or wear-compensating spring maintain a tight fit even when their threads begin to wear.
Flange | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | Wd. | Ht. | Thick. | No. of Thread Starts | Thread Type | Speed Ratio | Travel Distance per Turn | Mounting Hole Ctr.-to-Ctr. | Tensile Strength, psi | Dynamic Thrust Load Cap., lbs. | Each | ||
Acetal Plastic | |||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.048" | 39/64" | Not Rated | 25 | 0000000 | 000000 |
| A | 9/64"-41.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.024" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.048" | 39/64" | Not Rated | 25 | 0000000 | 00000 |
Acetal Plastic with Wear-Compensating Internal O-Ring | |||||||||||||||
| A | 9/64"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.048" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 9/64"-41.7 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.024" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
| A | 7/32"-20.8 | 1/2" | 0.406" | 3/4" | 13/32" | 1/8" | 1 | Rounded Acme | 1:1 | 0.048" | 39/64" | Not Rated | 5 | 0000000 | 00000 |
Precision Acme Lead Screws and Nuts
Pair with a motor in automated motion and positioning applications. A tight thread fit allows these lead screws and nuts to make accurate, repeatable starts and stops. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. To ensure compatibility, please select components that have the same thread direction and size.
PET plastic nuts are lightweight and corrosion resistant.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Lg. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | |
PET Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8"-8 | 3/4" | 1.344" | 1 | 1:1 | 0.125" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 000000 |
| 3/8"-10 | 3/4" | 1.344" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 3/8"-12 | 3/4" | 1.344" | 1 | 1:1 | 0.083" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 3/8"-16 | 3/4" | 1.344" | 1 | 1:1 | 0.063" | Class 2C | Not Rated | 350 | 15° to 175° | 0000000 | 00000 |
| 1/2"-10 | 1" | 1.469" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 650 | 15° to 175° | 00000000 | 00000 |
| 5/8"-5 | 1 1/4" | 1.859" | 1 | 1:1 | 0.2" | Class 2C | Not Rated | 1,000 | 15° to 175° | 0000000 | 00000 |
| 5/8"-8 | 1 1/4" | 1.859" | 1 | 1:1 | 0.125" | Class 2C | Not Rated | 1,000 | 15° to 175° | 00000000 | 00000 |
| 5/8"-10 | 1 1/4" | 1.859" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 1,000 | 15° to 175° | 00000000 | 00000 |
| 3/4"-5 | 1 1/2" | 2.234" | 1 | 1:1 | 0.2" | Class 2C | Not Rated | 1,450 | 15° to 175° | 00000000 | 00000 |
| 3/4"-6 | 1 1/2" | 2.234" | 1 | 1:1 | 0.167" | Class 2C | Not Rated | 1,450 | 15° to 175° | 00000000 | 00000 |
| 3/4"-10 | 1 1/2" | 2.234" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 1,450 | 15° to 175° | 00000000 | 00000 |
| Thread Size | Lg. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | |
PET Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8"-8 | 3/4" | 1.344" | 1 | 1:1 | 0.125" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 000000 |
| 3/8"-10 | 3/4" | 1.344" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 3/8"-12 | 3/4" | 1.344" | 1 | 1:1 | 0.083" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 1/2"-10 | 1" | 1.469" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 650 | 15° to 175° | 00000000 | 00000 |
| 5/8"-8 | 1 1/4" | 1.859" | 1 | 1:1 | 0.125" | Class 2C | Not Rated | 1,000 | 15° to 175° | 00000000 | 00000 |
| 5/8"-10 | 1 1/4" | 1.859" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 1,000 | 15° to 175° | 00000000 | 00000 |
| 3/4"-5 | 1 1/2" | 2.234" | 1 | 1:1 | 0.2" | Class 2C | Not Rated | 1,450 | 15° to 175° | 00000000 | 00000 |
| 3/4"-6 | 1 1/2" | 2.234" | 1 | 1:1 | 0.167" | Class 2C | Not Rated | 1,450 | 15° to 175° | 00000000 | 00000 |
| 3/4"-10 | 1 1/2" | 2.234" | 1 | 1:1 | 0.1" | Class 2C | Not Rated | 1,450 | 15° to 175° | 00000000 | 00000 |
Combine externally threaded nuts with a flange to create a custom flange nut.
External Thread | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Size | Lg. | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | |
PET Plastic | |||||||||||||
| 1/4"-16 | 5/8" | 0.688" | 1 | 1:1 | 0.063" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 160 | 15° to 175° | 000000000 | 000000 |
| 1/4"-20 | 5/8" | 0.688" | 1 | 1:1 | 0.05" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 160 | 15° to 175° | 000000000 | 00000 |
| 3/8"-8 | 5/8" | 0.688" | 1 | 1:1 | 0.125" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 3/8"-10 | 5/8" | 0.688" | 1 | 1:1 | 0.1" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 3/8"-12 | 5/8" | 0.688" | 1 | 1:1 | 0.083" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 3/8"-16 | 5/8" | 0.688" | 1 | 1:1 | 0.063" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 1/2"-10 | 3/4" | 1.125" | 1 | 1:1 | 0.1" | 15/16"-16 | 1/2" | Class 2C | Not Rated | 650 | 15° to 175° | 000000000 | 00000 |
| 5/8"-8 | 1" | 1.125" | 1 | 1:1 | 0.125" | 15/16"-16 | 1/2" | Class 2C | Not Rated | 1,000 | 15° to 175° | 000000000 | 00000 |
| 5/8"-10 | 1" | 1.125" | 1 | 1:1 | 0.1" | 15/16"-16 | 1/2" | Class 2C | Not Rated | 1,000 | 15° to 175° | 000000000 | 00000 |
| 3/4"-5 | 1 1/4" | 1.125" | 1 | 1:1 | 0.2" | 1"-18 | 1/2" | Class 2C | Not Rated | 1,450 | 15° to 175° | 000000000 | 00000 |
| 3/4"-6 | 1 1/4" | 1.125" | 1 | 1:1 | 0.167" | 1"-18 | 1/2" | Class 2C | Not Rated | 1,450 | 15° to 175° | 000000000 | 00000 |
| 3/4"-10 | 1 1/4" | 1.125" | 1 | 1:1 | 0.1" | 1"-18 | 1/2" | Class 2C | Not Rated | 1,450 | 15° to 175° | 000000000 | 00000 |
| 1"-4 | 1 1/2" | 1.5" | 1 | 1:1 | 0.25" | 1 3/8"-16 | 1/2" | Class 2C | Not Rated | 2,500 | 15° to 175° | 000000000 | 00000 |
| 1"-5 | 1 1/2" | 1.5" | 1 | 1:1 | 0.2" | 1 3/8"-16 | 1/2" | Class 2C | Not Rated | 2,500 | 15° to 175° | 000000000 | 00000 |
| 1"-6 | 1 1/2" | 1.5" | 1 | 1:1 | 0.167" | 1 3/8"-16 | 1/2" | Class 2C | Not Rated | 2,500 | 15° to 175° | 000000000 | 00000 |
| 1"-10 | 1 1/2" | 1.5" | 1 | 1:1 | 0.1" | 1 3/8"-16 | 1/2" | Class 2C | Not Rated | 2,500 | 15° to 175° | 000000000 | 00000 |
| 1 1/4"-5 | 1 3/4" | 2.125" | 1 | 1:1 | 0.2" | 1 31/32"-18 | 13/16" | Class 2C | Not Rated | 3,900 | 15° to 175° | 000000000 | 00000 |
| 1 1/2"-4 | 2 19/64" | 2.125" | 1 | 1:1 | 0.25" | 1 31/32"-18 | 13/16" | Class 2C | Not Rated | 6,000 | 15° to 175° | 000000000 | 00000 |
| 2"-4 | 3 15/32" | 2.75" | 1 | 1:1 | 0.25" | 2 35/64"-18 | 7/8" | Class 2C | Not Rated | 10,000 | 15° to 175° | 000000000 | 00000 |
Thread onto an externally threaded acme nut to create a custom flange nut.
| Flange Thread Size | Flange Dia. | Flange Thick. | Bolt Circle Dia. | Flange Hardness | Each | |
1117 Carbon Steel | ||||||
|---|---|---|---|---|---|---|
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 156 | 000000000 | 000000 |
| 1 31/32"-18 | 4 13/64" | 53/64" | 3 7/16" | Brinell 156 | 000000000 | 00000 |
| 2 35/64"-18 | 4 15/16" | 29/32" | 4 1/16" | Brinell 156 | 000000000 | 00000 |
1215 Carbon Steel | ||||||
| 9/16"-18 | 1 39/64" | 13/32" | 1 1/8" | Not Rated | 000000000 | 00000 |
| 15/16"-16 | 2 5/8" | 17/32" | 2 3/32" | Not Rated | 000000000 | 00000 |
303 Stainless Steel | ||||||
| 9/16"-18 | 1 39/64" | 13/32" | 1 1/8" | Brinell 140 | 0000000 | 00000 |
| 15/16"-16 | 2 5/8" | 17/32" | 2 3/32" | Brinell 140 | 0000000 | 00000 |
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 140 | 0000000 | 00000 |
| 1 31/32"-18 | 4 13/64" | 53/64" | 3 7/16" | Brinell 140 | 0000000 | 00000 |
| 2 35/64"-18 | 4 15/16" | 29/32" | 4 1/16" | Brinell 140 | 0000000 | 00000 |
Fast-Travel Precision Acme Lead Screws and Nuts
Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start. The threads have a tight thread fit for accurate, repeatable starts and stops. Pair with a motor in automated motion and positioning applications. To ensure compatibility, please select components that have the same thread direction, thread size, and number of thread starts.
PET plastic nuts are lightweight and corrosion resistant.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Lg. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | |
PET Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4"-12 | 3/4" | 1.344" | 4 | 4:1 | 0.333" | Class 2C | Not Rated | 160 | 15° to 175° | 00000000 | 000000 |
| 3/8"-8 | 3/4" | 1.344" | 2 | 2:1 | 0.25" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 3/8"-8 | 3/4" | 1.344" | 4 | 4:1 | 0.5" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 3/8"-10 | 3/4" | 1.344" | 2 | 2:1 | 0.2" | Class 2C | Not Rated | 350 | 15° to 175° | 00000000 | 00000 |
| 1/2"-8 | 1" | 1.469" | 2 | 2:1 | 0.25" | Class 2C | Not Rated | 650 | 15° to 175° | 0000000 | 00000 |
| 1/2"-10 | 1" | 1.469" | 2 | 2:1 | 0.2" | Class 2C | Not Rated | 650 | 15° to 175° | 0000000 | 00000 |
| 1/2"-10 | 1" | 1.469" | 5 | 5:1 | 0.5" | Class 2C | Not Rated | 650 | 15° to 175° | 00000000 | 00000 |
Combine externally threaded nuts with a flange to create a custom flange nut.
External Thread | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Dia. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Size | Lg. | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Temperature Range, °F | Each | |
PET Plastic | |||||||||||||
| 1/4"-12 | 5/8" | 0.688" | 4 | 4:1 | 0.333" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 160 | 15° to 175° | 000000000 | 000000 |
| 3/8"-5 | 5/8" | 0.688" | 5 | 5:1 | 1" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 250 | 15° to 175° | 000000000 | 00000 |
| 3/8"-8 | 5/8" | 0.688" | 2 | 2:1 | 0.25" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 3/8"-8 | 5/8" | 0.688" | 4 | 4:1 | 0.5" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 3/8"-10 | 5/8" | 0.688" | 2 | 2:1 | 0.2" | 9/16"-18 | 3/8" | Class 2C | Not Rated | 350 | 15° to 175° | 000000000 | 00000 |
| 1/2"-8 | 3/4" | 1.125" | 2 | 2:1 | 0.25" | 15/16"-16 | 1/2" | Class 2C | Not Rated | 650 | 15° to 175° | 000000000 | 00000 |
| 1/2"-10 | 3/4" | 1.125" | 2 | 2:1 | 0.2" | 15/16"-16 | 1/2" | Class 2C | Not Rated | 650 | 15° to 175° | 000000000 | 00000 |
| 1/2"-10 | 3/4" | 1.125" | 5 | 5:1 | 0.5" | 15/16"-16 | 1/2" | Class 2C | Not Rated | 650 | 15° to 175° | 000000000 | 00000 |
| 3/4"-8 | 1 1/4" | 1.125" | 4 | 4:1 | 0.5" | 1"-18 | 1/2" | Class 2C | Not Rated | 1,450 | 15° to 175° | 000000000 | 00000 |
| 1"-4 | 1 1/2" | 1.5" | 2 | 2:1 | 0.5" | 1 3/8"-16 | 1/2" | Class 2C | Not Rated | 2,500 | 15° to 175° | 000000000 | 00000 |
Thread onto an externally threaded acme nut to create a custom flange nut.
| Flange Thread Size | Flange Dia. | Flange Thick. | Bolt Circle Dia. | Flange Hardness | Each | |
1117 Carbon Steel | ||||||
|---|---|---|---|---|---|---|
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 156 | 000000000 | 000000 |
1215 Carbon Steel | ||||||
| 9/16"-18 | 1 39/64" | 13/32" | 1 1/8" | Not Rated | 000000000 | 00000 |
| 15/16"-16 | 2 5/8" | 17/32" | 2 3/32" | Not Rated | 000000000 | 00000 |
| 1"-18 | 2 5/8" | 17/32" | 2 3/32" | Not Rated | 000000000 | 00000 |
303 Stainless Steel | ||||||
| 9/16"-18 | 1 39/64" | 13/32" | 1 1/8" | Brinell 140 | 0000000 | 00000 |
| 15/16"-16 | 2 5/8" | 17/32" | 2 3/32" | Brinell 140 | 0000000 | 00000 |
| 1"-18 | 2 5/8" | 17/32" | 2 3/32" | Brinell 140 | 0000000 | 00000 |
| 1 3/8"-16 | 2 49/64" | 33/64" | 2 17/64" | Brinell 140 | 0000000 | 00000 |