Material Material |
|---|
|
Screw Material Screw Material |
|---|
|
Drive Style Drive Style |
|---|
|
Maximum Clamp ID (Metric) Maximum Clamp ID (Metric) |
|---|
Minimum Clamp ID (Metric) Minimum Clamp ID (Metric) |
|---|
SAE Number SAE Number |
|---|
Housing Material Housing Material |
|---|
|
Minimum Clamp ID Minimum Clamp ID |
|---|
Maximum Clamp ID Maximum Clamp ID |
|---|
Maximum Torque Maximum Torque |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Finish Finish |
|---|
|
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Worm-Drive Clamps with Smooth Bands for Soft Hose and Tube
Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube. Use them with soft hose and tube, such as silicone. Do not exceed the maximum torque or clamps may be damaged. They all meet either DIN or SAE dimensional standards. Some are ASTM rated for titanium composition.
Zinc-plated steel has fair corrosion resistance.
430 stainless steel has good corrosion resistance.
304 stainless steel has very good corrosion resistance.
316 stainless steel has excellent corrosion resistance.
Titanium is more corrosion resistant than stainless steel, making it the best choice for applications involving harsh acids and chemicals. It’s also stronger than stainless steel, yet still lightweight. PTFE-coated titanium has a natural slippery surface, which reduces friction and prevents clamps from damaging hose or tubes.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | Temp. Range, °F | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | SAE No. | Min. | Max. | Max. Torque, in.-lbs. | Hex Size | Reusable | Specifications Met | Pkg. Qty. | Pkg. | |
430 Stainless Steel with Zinc-Plated Steel Screw | |||||||||||||
| 5/16" to 5/8" | 8 to 16 | 3/8" | 0.024" | 4 | -40° | 350° | 20 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 000000 |
| 1/2" to 3/4" | 12 to 20 | 3/8" | 0.024" | 4 | -40° | 350° | 20 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 5/8" to 1 1/16" | 16 to 27 | 3/8" | 0.024" | 10 | -40° | 350° | 26.5 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3/4" to 1 1/4" | 20 to 32 | 3/8" | 0.024" | 12 | -40° | 350° | 26.5 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1" to 1 5/8" | 25 to 40 | 3/8" | 0.024" | 18 | -40° | 350° | 26.5 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 1/4" to 2" | 32 to 50 | 3/8" | 0.024" | 24 | -40° | 350° | 31 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 5/8" to 2 3/8" | 40 to 60 | 3/8" | 0.024" | 30 | -40° | 350° | 31 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2" to 2 3/4" | 50 to 70 | 3/8" | 0.024" | 36 | -40° | 350° | 31 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/8" to 3 1/8" | 60 to 80 | 3/8" | 0.024" | 42 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/4" to 3 1/2" | 70 to 90 | 3/8" | 0.024" | 48 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 1/8" to 4" | 80 to 100 | 3/8" | 0.024" | 56 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 1/2" to 4 3/8" | 90 to 110 | 3/8" | 0.024" | 62 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 4" to 4 3/4" | 100 to 120 | 3/8" | 0.024" | 68 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 4 3/8" to 5 1/8" | 110 to 130 | 3/8" | 0.024" | 74 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4 3/4" to 5 1/2" | 120 to 140 | 3/8" | 0.024" | 80 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/8" to 5 7/8" | 130 to 150 | 3/8" | 0.024" | 86 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/2" to 6 1/4" | 140 to 160 | 3/8" | 0.024" | 92 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
430 Stainless Steel with 430 Stainless Steel Screw | |||||||||||||
| 5/16" to 5/8" | 8 to 16 | 3/8" | 0.024" | 8 | -40° | 600° | 20 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1/2" to 7/8" | 12 to 22 | 3/8" | 0.024" | 8 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 5/8" to 1 1/16" | 16 to 27 | 3/8" | 0.024" | 10 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 13/16" to 1 1/4" | 20 to 32 | 3/8" | 0.024" | 12 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 15/16" to 1 3/8" | 23 to 35 | 3/8" | 0.024" | 12 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1" to 1 9/16" | 25 to 40 | 3/8" | 0.024" | 24 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 3/16" to 1 3/4" | 30 to 45 | 3/8" | 0.024" | 24 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 3/8" to 2" | 32 to 50 | 3/8" | 0.024" | 28 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 9/16" to 2 3/8" | 40 to 60 | 3/8" | 0.024" | 36 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2" to 2 3/4" | 50 to 70 | 3/8" | 0.024" | 40 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/8" to 3 1/8" | 60 to 80 | 3/8" | 0.024" | 48 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/4" to 3 9/16" | 70 to 90 | 3/8" | 0.024" | 52 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 1/8" to 3 15/16" | 80 to 100 | 3/8" | 0.024" | 60 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 9/16" to 4 5/16" | 90 to 110 | 3/8" | 0.024" | 64 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 15/16" to 4 3/4" | 100 to 120 | 3/8" | 0.024" | 72 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 4 5/16" to 5 1/8" | 110 to 130 | 3/8" | 0.024" | 80 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4 3/4" to 5 1/2" | 120 to 140 | 3/8" | 0.024" | 80 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/8" to 5 15/16" | 130 to 150 | 3/8" | 0.024" | 88 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/2" to 6 5/16" | 140 to 160 | 3/8" | 0.024" | 96 | -40° | 600° | 30 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
304 Stainless Steel with 304 Stainless Steel Screw | |||||||||||||
| 5/16" to 5/8" | 8 to 16 | 3/8" | 0.024" | 4 | -40° | 350° | 20 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1/2" to 3/4" | 12 to 20 | 3/8" | 0.024" | 4 | -40° | 350° | 20 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 5/8" to 1 1/16" | 16 to 27 | 3/8" | 0.024" | 10 | -40° | 350° | 26.5 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 5/8" to 1 1/16" | 16 to 27 | 1/2" | 0.024" | 10 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3/4" to 1 1/4" | 20 to 32 | 3/8" | 0.024" | 12 | -40° | 350° | 26.5 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 13/16" to 1 1/4" | 20 to 32 | 1/2" | 0.024" | 12 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 15/16" to 1 3/8" | 23 to 35 | 1/2" | 0.024" | 12 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1" to 1 9/16" | 25 to 40 | 1/2" | 0.024" | 24 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1" to 1 5/8" | 25 to 40 | 3/8" | 0.024" | 18 | -40° | 350° | 26.5 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 3/16" to 1 3/4" | 30 to 45 | 1/2" | 0.024" | 24 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 1/4" to 2" | 32 to 50 | 3/8" | 0.024" | 24 | -40° | 350° | 31 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 3/8" to 2" | 35 to 50 | 1/2" | 0.024" | 28 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 9/16" to 2 3/8" | 40 to 60 | 1/2" | 0.024" | 36 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 1 5/8" to 2 3/8" | 40 to 60 | 3/8" | 0.024" | 30 | -40° | 350° | 31 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2" to 2 3/4" | 50 to 70 | 3/8" | 0.024" | 36 | -40° | 350° | 31 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2" to 2 3/4" | 50 to 70 | 1/2" | 0.024" | 40 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/8" to 3 1/8" | 60 to 80 | 3/8" | 0.024" | 42 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/8" to 3 1/8" | 60 to 80 | 1/2" | 0.024" | 48 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/4" to 3 1/2" | 70 to 90 | 3/8" | 0.024" | 48 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 2 3/4" to 3 9/16" | 70 to 90 | 1/2" | 0.024" | 52 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 1/8" to 3 15/16" | 80 to 100 | 1/2" | 0.024" | 60 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 1/8" to 4" | 80 to 100 | 3/8" | 0.024" | 56 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 10 | 0000000 | 00000 |
| 3 1/2" to 4 3/8" | 90 to 110 | 3/8" | 0.024" | 62 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 3 9/16" to 4 5/16" | 90 to 110 | 1/2" | 0.024" | 72 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 3 15/16" to 4 3/4" | 100 to 120 | 1/2" | 0.024" | 72 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4" to 4 3/4" | 100 to 120 | 3/8" | 0.024" | 68 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4 5/16" to 5 1/8" | 110 to 130 | 1/2" | 0.024" | 80 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4 3/8" to 5 1/8" | 110 to 130 | 3/8" | 0.024" | 74 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4 3/4" to 5 1/2" | 120 to 140 | 3/8" | 0.024" | 80 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 4 3/4" to 5 1/2" | 120 to 140 | 1/2" | 0.024" | 80 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/8" to 5 7/8" | 130 to 150 | 3/8" | 0.024" | 86 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/8" to 5 15/16" | 130 to 150 | 1/2" | 0.024" | 88 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/2" to 6 1/4" | 140 to 160 | 3/8" | 0.024" | 92 | -40° | 350° | 35.4 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 1/2" to 6 5/16" | 140 to 160 | 1/2" | 0.024" | 96 | -40° | 350° | 57 | 7mm, 9/32" | Yes | DIN 3017 | 5 | 0000000 | 00000 |
| 5 15/16" to 7.167" | 150 to 180 | 1/2" | 0.024" | 104 | -40° | 350° | 45 | 7mm, 9/32" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 6 7/8" to 8 1/16" | 175 to 205 | 1/2" | 0.024" | 122 | -40° | 350° | 45 | 7mm, 9/32" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 7 7/8" to 9 1/16" | 200 to 231 | 1/2" | 0.024" | 138 | -40° | 350° | 45 | 7mm, 9/32" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 8 7/8" to 10 1/16" | 226 to 256 | 1/2" | 0.024" | 154 | -40° | 350° | 45 | 7mm, 9/32" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 9 7/8" to 11 1/8" | 251 to 282 | 1/2" | 0.024" | 170 | -40° | 350° | 45 | 7mm, 9/32" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
| 10 15/16" to 12.167" | 277 to 307 | 1/2" | 0.024" | 186 | -40° | 350° | 45 | 7mm, 9/32" | Yes | SAE J1508 | 5 | 0000000 | 00000 |
316 Stainless Steel with 316 Stainless Steel Screw | |||||||||||||
| 7/16" to 11/16" | 11 to 17 | 3/8" | 0.031" | 4 | -40° | 1200° | 25 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1/2" to 13/16" | 13 to 20 | 3/8" | 0.031" | 6 | -40° | 1200° | 25 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 5/8" to 15/16" | 15 to 24 | 1/2" | 0.031" | 8 | -40° | 1200° | 26.5 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 3/4" to 1 1/8" | 19 to 28 | 1/2" | 0.031" | 10 | -40° | 1200° | 26.5 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 7/8" to 1 1/4" | 22 to 32 | 1/2" | 0.031" | 12 | -40° | 1200° | 26.5 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1 1/16" to 1 1/2" | 26 to 38 | 1/2" | 0.031" | 16 | -40° | 1200° | 26.5 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1 1/4" to 1 3/4" | 32 to 44 | 1/2" | 0.031" | 20 | -40° | 1200° | 26.5 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1 1/4" to 2 1/4" | 32 to 57 | 1/2" | 0.031" | 28 | -40° | 1200° | 31 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1 1/2" to 2" | 38 to 50 | 1/2" | 0.031" | 24 | -40° | 1200° | 31 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1 1/2" to 2 1/2" | 38 to 64 | 1/2" | 0.031" | 32 | -40° | 1200° | 31 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 1 3/4" to 2 3/4" | 44 to 70 | 1/2" | 0.031" | 36 | -40° | 1200° | 31 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 2" to 3" | 51 to 76 | 1/2" | 0.031" | 40 | -40° | 1200° | 31 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 2 1/4" to 3 1/4" | 57 to 83 | 1/2" | 0.031" | 44 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 2 1/2" to 3 1/2" | 64 to 89 | 1/2" | 0.031" | 48 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 2 3/4" to 3 3/4" | 70 to 95 | 1/2" | 0.031" | 52 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 0000 |
| 3" to 4" | 76 to 102 | 1/2" | 0.031" | 56 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 3 1/4" to 4 1/4" | 83 to 108 | 1/2" | 0.031" | 60 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 3 1/2" to 4 1/2" | 89 to 114 | 1/2" | 0.031" | 64 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 3 1/2" to 5" | 89 to 127 | 1/2" | 0.031" | 72 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 4" to 5 1/2" | 102 to 140 | 1/2" | 0.031" | 80 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 4 1/2" to 6" | 114 to 152 | 1/2" | 0.031" | 88 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 5" to 6 1/2" | 127 to 165 | 1/2" | 0.031" | 96 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 5 1/2" to 7" | 140 to 178 | 1/2" | 0.031" | 104 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 6" to 7 1/2" | 152 to 191 | 1/2" | 0.031" | 112 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 6 1/2" to 8" | 165 to 203 | 1/2" | 0.031" | 122 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 7" to 8 1/2" | 178 to 216 | 1/2" | 0.031" | 128 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 7 5/8" to 9 1/8" | 194 to 232 | 1/2" | 0.031" | 138 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 8 5/8" to 10 1/8" | 219 to 257 | 1/2" | 0.031" | 154 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 9 5/8" to 11 1/8" | 244 to 283 | 1/2" | 0.031" | 170 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
| 10 5/8" to 12 1/8" | 270 to 308 | 1/2" | 0.031" | 186 | -40° | 1200° | 35 | 7mm, 9/32" | Yes | SAE J1508 | 1 | 00000000 | 00000 |
PTFE-Coated Titanium with PTFE-Coated Titanium Screw | |||||||||||||
| 11/16" to 1 1/16" | 16 to 27 | 1/2" | 0.043" | __ | Not Rated | 600° | 44.2 | 7mm, 9/32" | Yes | ASTM B265, DIN 3017 | 1 | 00000000 | 000000 |
| 1" to 1 9/16" | 25 to 40 | 1/2" | 0.043" | __ | Not Rated | 600° | 53.1 | 7mm, 9/32" | Yes | ASTM B265, DIN 3017 | 1 | 00000000 | 000000 |
| 1 5/8" to 2 5/16" | 40 to 60 | 1/2" | 0.043" | __ | Not Rated | 600° | 61.9 | 7mm, 9/32" | Yes | ASTM B265, DIN 3017 | 1 | 00000000 | 000000 |
| 2" to 2 3/4" | 50 to 70 | 1/2" | 0.043" | __ | Not Rated | 600° | 66.3 | 7mm, 9/32" | Yes | ASTM B265, DIN 3017 | 1 | 00000000 | 000000 |
| 3 9/16" to 4 5/16" | 90 to 110 | 1/2" | 0.043" | __ | Not Rated | 600° | 66.3 | 7mm, 9/32" | Yes | ASTM B265, DIN 3017 | 1 | 00000000 | 000000 |
| 5 1/8" to 5 7/8" | 130 to 150 | 1/2" | 0.043" | __ | Not Rated | 600° | 66.3 | 7mm, 9/32" | Yes | ASTM B265, DIN 3017 | 1 | 00000000 | 000000 |
Worm-Drive Smooth-Band Clamp Assortments for Soft Hose and Tube
Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges. Use them with soft hose and tube, such as silicone.
Galvanized steel clamps have fair corrosion resistance.
300-series and 304 stainless steel clamps resist corrosion better than galvanized steel clamps.
316 stainless steel clamps have excellent corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
Clamp ID Range | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Inch | mm | Band Thick. | Temp. Range, ° F | Specifications Met | No. of Pieces | Includes | Material | Each | |
Galvanized Steel with Steel Screw | |||||||||
| 5/16" to 2 5/16" | 8 to 75 | 0.032" | -50° to 250° | SAE J1508 | 175 | Clamps with 3/8" band width, 1/2"-13/16" clamp ID range, SAE No. 6 (25 each) Clamps with 3/8" band width, 1 1/2"-2" clamp ID range, SAE No. 24 (25 each) Clamps with 3/8" band width, 5/16"-9/16" clamp ID range, SAE No. 3 (25 each) Clamps with 3/8” band width, 1”-1 1/2” clamp ID range, SAE No. 16 (25 each) Clamps with 3/8” band width, 3/4”-1 1/8” clamp ID range, SAE No. 10 (25 each) Clamps with 3/8” band width, 2”-2 9/16” clamp ID range, SAE No. 32 (25 each) Clamps with 3/8” band width, 2 1/4”-2 15/16” clamp ID range, SAE No. 40 (25 each) 9/32" (7 mm) Hex Nutdriver Metal Box | Galvanized Steel | 000000000 | 0000000 |
300 Series Stainless Steel with 410 Stainless Steel Screw | |||||||||
| 7/16" to 7" | 11 to 178 | 0.023" | -50° to 250° | SAE J1508 | 45 | Clamps with 1/2” band width, 3 9/16"-4 1/2" clamp ID range, SAE No. 64 (5 each) Clamps with 1/2” band width, 2 1/16"-3" clamp ID range, SAE No. 40 (5 each) Clamps with 1/2” band width, 2 13/16"-3 3/4" clamp ID range, SAE No. 52 (5 each) 5/16" (8mm) Hex Nutdriver Clamps with 1/2” band width, 13/16"-1 1/2" clamp ID range, SAE No. 16 (5 each) Clamps with 1/2” band width, 6 1/8"-7" clamp ID range, SAE No. 104 (5 each) Clamps with 1/2” band width, 5 5/8"-6 1/2" clamp ID range, SAE No. 96 (5 each) Clamps with 1/2” band width, 1 5/16"-2 1/4" clamp ID range, SAE No. 28 (5 each) Clamps with 1/2” band width, 4 5/8"-5 1/2" clamp ID range, SAE No. 80 (5 each) Clamps with 1/2” band width, 7/16”-25/32” clamp ID range, SAE No. 6 (5 each) Metal Box | 300 Series Stainless Steel | 000000000 | 000000 |
300 Series Stainless Steel with Zinc-Plated Steel Screw | |||||||||
| 7/16" to 7" | 11 to 178 | 0.023" | -50° to 250° | SAE J1508 | 45 | Clamps with 1/2” band width, 3 9/16"-4 1/2" clamp ID range, SAE No. 64 (5 each) Clamps with 1/2” band width, 2 1/16"-3" clamp ID range, SAE No. 40 (5 each) Clamps with 1/2” band width, 2 13/16"-3 3/4" clamp ID range, SAE No. 52 (5 each) 5/16" (8mm) Hex Nutdriver Clamps with 1/2” band width, 13/16"-1 1/2" clamp ID range, SAE No. 16 (5 each) Clamps with 1/2” band width, 6 1/8"-7" clamp ID range, SAE No. 104 (5 each) Clamps with 1/2” band width, 5 5/8"-6 1/2" clamp ID range, SAE No. 96 (5 each) Clamps with 1/2” band width, 1 5/16"-2 1/4" clamp ID range, SAE No. 28 (5 each) Clamps with 1/2” band width, 4 5/8"-5 1/2" clamp ID range, SAE No. 80 (5 each) Clamps with 1/2” band width, 7/16”-25/32” clamp ID range, SAE No. 6 (5 each) Metal Box | 300 Series Stainless Steel | 000000000 | 000000 |
304 Stainless Steel with 304 Stainless Steel Screw | |||||||||
| 5/16" to 3 1/8" | 8 to 80 | 0.031" | -40° to 350° | SAE J1508 | 44 | Clamps with 3/8" band width, 1"-1 9/16" clamp ID range, SAE No. 17 (4 each) Clamps with 3/8" band width, 1 9/16"-2 3/8" clamp ID range, SAE No. 30 (4 each) Clamps with 3/8" band width, 2"-2 3/4" clamp ID range, SAE No. 36 (4 each) Clamps with 3/8" band width, 5/8"-1 1/16" clamp ID range, SAE No. 9 (4 each) Clamps with 3/8" band width, 3/4"-1 1/4" clamp ID range, SAE No. 12 (4 each) Clamps with 3/8" band width, 5/16”-5/8” clamp ID range, SAE No. 2 (4 each) Clamps with 3/8" band width, 15/16"-1 3/8" clamp ID range, SAE No. 14 (4 each) Clamps with 3/8" band width, 1/2"-11/16” clamp ID range, SAE No. 5 (4 each) Clamps with 3/8" band width, 1 1/4"-2" clamp ID range, SAE No. 23 (4 each) Clamps with 3/8" band width, 5/8"-7/8” clamp ID range, SAE No. 6 (4 each) Clamps with 3/8" band width, 2 3/8"-3 1/8" clamp ID range, SAE No. 42 (4 each) 9/32" (7 mm) Hex Nutdriver Plastic Box | 304 Stainless Steel | 00000000 | 000000 |
| 5/16" to 3 15/16" | 8 to 100 | 0.031" | -40° to 350° | SAE J1508 | 155 | Clamps with 3/8" band width, 1 9/16"-2 3/8" clamp ID range, SAE No. 30 (5 each) Clamps with 3/8" band width, 15/16"-1 3/8" clamp ID range, SAE No. 14 (10 each) Clamps with 3/8" band width, 5/16”-5/8” clamp ID range, SAE No. 2 (20 each) Clamps with 3/8" band width, 2"-2 3/4" clamp ID range, SAE No. 36 (5 each) Clamps with 3/8" band width, 2 3/4"-3 9/16" clamp ID range, SAE No. 49 (5 each) Clamps with 3/8" band width, 1 1/4"-2" clamp ID range, SAE No. 23 (10 each) Clamps with 3/8" band width, 1/2"-11/16” clamp ID range, SAE No. 5 (20 each) Clamps with 3/8" band width, 5/8"-7/8” clamp ID range, SAE No. 6 (20 each) Clamps with 3/8" band width, 5/8"-1 1/16" clamp ID range, SAE No. 9 (20 each) Clamps with 3/8" band width, 1"-1 9/16" clamp ID range, SAE No. 17 (10 each) Clamps with 3/8" band width, 3 1/8"-3 15/16" clamp ID range, SAE No. 55 (5 each) Clamps with 3/8" band width, 3/4"-1 1/4" clamp ID range, SAE No. 12 (20 each) Clamps with 3/8" band width, 2 3/8"-3 1/8" clamp ID range, SAE No. 42 (5 each) 9/32" (7 mm) Hex Nutdriver Metal Box | 304 Stainless Steel | 00000000 | 000000 |
316 Stainless Steel with 316 Stainless Steel Screw | |||||||||
| 7/16" to 2 1/2" | 11 to 64 | 0.031" | -40° to 1200° | SAE J1508 | 70 | Clamps with 3/8” band width, 7/16”-11/16” clamp ID range, SAE No. 4 (10 each) Clamps with 3/8” band width, 1/2”-13/16” clamp ID range, SAE No. 6 (10 each) Clamps with 1/2" band width, 5/8”-15/16” clamp ID range, SAE No.8 (10 each) Clamps with 1/2" band width, 3/4”-1 1/8” clamp ID range, SAE No. 10 (10 each) Clamps with 1/2" band width, 7/8”-1 1/4” clamp ID range, SAE No. 12 (5 each) Clamps with 1/2" band width, 1 1/16”-1 1/2” clamp ID range, SAE No. 16 (5 each) Clamps with 1/2" band width, 1 1/4”-1 3/4” clamp ID range, SAE No. 20 (5 each) Clamps with 1/2" band width, 1 1/4”-2 1/4” clamp ID range, SAE No. 28 (5 each) Clamps with 1/2" band width, 1 1/2”-2” clamp ID range, SAE No. 24 (5 each) Clamps with 1/2" band width, 1 1/2”-2 1/2” clamp ID range, SAE No. 32 (5 each) 9/32" (7 mm) Hex Nutdriver Metal Box | 316 Stainless Steel | 00000000 | 000000 |
| 7/16" to 2 1/2" | 11 to 64 | 0.031" | -40° to 1200° | SAE J1508 | 140 | Clamps with 3/8” band width, 7/16”-11/16” clamp ID range, SAE No. 4 (20 each) Clamps with 3/8” band width, 1/2”-13/16” clamp ID range, SAE No. 6 (20 each) Clamps with 1/2" band width, 5/8”-15/16” clamp ID range, SAE No.8 (20 each) Clamps with 1/2" band width, 3/4”-1 1/8” clamp ID range, SAE No. 10 (20 each) Clamps with 1/2" band width, 7/8”-1 1/4” clamp ID range, SAE No. 12 (10 each) Clamps with 1/2" band width, 1 1/16”-1 1/2” clamp ID range, SAE No. 16 (10 each) Clamps with 1/2" band width, 1 1/4”-1 3/4” clamp ID range, SAE No. 20 (10 each) Clamps with 1/2" band width, 1 1/4”-2 1/4” clamp ID range, SAE No. 28 (10 each) Clamps with 1/2" band width, 1 1/2”-2” clamp ID range, SAE No. 24 (10 each) Clamps with 1/2" band width, 1 1/2”-2 1/2” clamp ID range, SAE No. 32 (10 each) 9/32" (7 mm) Hex Nutdriver Metal Box | 316 Stainless Steel | 00000000 | 000000 |
High-Temperature Build-Your-Own Worm-Drive Clamps for Soft Hose and Tube
Use this banding to create 4" diameter and larger worm-drive clamps for high-temperature applications. It has ridges on one side for the housing to ride upon—this leaves the reverse side smooth with no sharp edges to worry about.
Banding is for use with soft hose and tube, such as silicone. It can also be used to clamp pipe, attach signs, and connect tubing. It is furnished in a dispenser carton. To install, cut the banding to your desired length with wire snips, feed it through the housing (sold separately), and tighten the screw with a slotted screwdriver or hex nutdriver.
Note: The breaking strength listed is the maximum tension that can be applied to the banding.
For technical drawings and 3-D models, click on a part number.
Build-Your-Own Worm-Drive Clamps for Soft Hose and Tube
Build your own 2" diameter and larger smooth-band worm-drive clamps for soft hose and tube, such as silicone. Cut a length of band from the continuous roll and attach a housing and a screw.
410 stainless steel offers good corrosion resistance.
200/300 series stainless steel has very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose or tube with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamps
Band | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Minimum Clamp ID | Length, ft. | Width | Thickness | Drive Style | Hex Size | Number of Screws and Housings | Reusable | Each | |
200/300 Series Stainless Steel with 410 Stainless Steel Screw | |||||||||
| 2" | 10 | 3/8" | 0.015" | Slotted, External Hex | 5/16" | 3 | Yes | 0000000 | 000000 |
| 2" | 100 | 3/8" | 0.015" | Slotted, External Hex | 5/16" | 25 | Yes | 0000000 | 000000 |
| Replacement Screw and Housing | 0000000 | Each | 000000 |