Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

These hinges are made of metal.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Tighten or loosen an adjustment screw to change the hinge resistance.

Eliminate slamming lids—these hinges hold lids open at their widest angle and then slowly pull them closed.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

Only one cutout (mortise) is needed for these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.

A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape.

Plastic bushings on these metal hinges prevent metal-to-metal contact that can release particles as hinges open and close.

When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden