Vertical Capacity Vertical Capacity |
---|
|
|
More
![]() | ![]() 30° Lift Angle | ![]() 180° Pivot |
![]() Top View Two Mounting Holes | ![]() Top View Four Mounting Holes |
The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Number of Mounting Holes | Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Fasteners Included | Each | |
Black-Oxide Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 | 5/16"-18 | 13/16" | 1" | 3 7/8" | 2,000 | 180° Pivot | Yes | 00000000 | 000000 |
2 | 3/8"-16 | 3/4" | 1 1/4" | 4 5/8" | 2,500 | 180° Pivot | Yes | 00000000 | 00000 |
2 | 1/2"-13 | 1 3/8" | 1 1/2" | 6" | 5,000 | 180° Pivot | Yes | 00000000 | 00000 |
4 | 1/2"-13 | 1 3/8" | 1 3/4" | 7 1/2" | 12,000 | 180° Pivot | Yes | 00000000 | 00000 |
4 | 5/8"-11 | 1 1/2" | 2" | 9 1/8" | 20,000 | 180° Pivot | Yes | 00000000 | 000000 |