The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

These nozzles have replaceable tips that are removable with a quarter-turn.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

These nozzles produce a flat, thin spray pattern.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

With a unique spiral tip, these nozzles produce high flow rates and are clog-resistant.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Convert dispensing tips with male threads into quick-disconnect couplings.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

These flexible needles can be cut to length.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

Use these guns to clean as well as apply chemicals and solvents.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature.

Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.