Diesel-Fuel Hose Nozzles
Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.
Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.
Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.
Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.
Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.
Style D has the largest spout and the highest flow rate of all the nozzles for use with trucks, buses, and other heavy-duty bulk fueling applications.
Use hold-open clip kits to replace a broken clip. Install with pliers.
For technical drawings and 3-D models, click on a part number.
Nozzles | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spout | Scuff Guard | Threaded Swivels | Replacement Hold-Open Clip Kits | ||||||||||||||
| Style | Max. Flow Rate, gpm | Pipe Size  | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Color | Shut-Off Type | Specifications Met | Each | Each | Each | |||
Nozzles | |||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 |
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Red | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
| B | 25 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/8" | 6 13/16" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 000000 | 00 |
Nozzles with Three-Position Hold-Open Clip | |||||||||||||||||
| A | 10 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 15/16" | 6 1/2" | Aluminum | Green | Automatic, Manual | __ | 0000000 | 000000 | 000000 | 00 | 0000000 | 000000 |
| C | 75 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 3/8" | 7" | Aluminum | Green | Automatic, Manual | UL Listed | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
| D | 100 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 1 1/2" | 7 7/8" | Aluminum | __ | Manual | __ | 00000000 | 000000 | 000000 | 00 | 000000 | 00 |
Threaded Swivels for Hose Nozzles
Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.
Aluminum swivels are lighter in weight than brass swivels.
45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.
For technical drawings and 3-D models, click on a part number.
Aluminum | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Gasket Material | Specifications Met | Each | |
For Use With Gasoline and Diesel Fuel | ||||||||
| 3/4 × 3/4 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -20° to 120° | 4 1/8" | Buna-N Rubber | UL Listed | 0000000 | 000000 |
| 1 × 1 | Threaded NPT Female × Threaded NPT Male | 50 psi @ 72° F | -20° to 120° | 4 3/4" | Buna-N Rubber | UL Listed | 0000000 | 000000 |