Hydraulic Hose Nozzles
Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.
Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.
Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | Pipe Size  | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Specifications Met | Each | |
| A | 60 | 1 1/2 | Threaded NPT Female | 50 psi @ 72° F | -40° to 300° | 1 7/8" | 8 3/8" | Aluminum | Manual | __ | 00000000 | 0000000 |
| B | 40 | 3/4 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6" | Aluminum | Manual | UL Listed | 0000000 | 00000 |
| B | 40 | 1 | Threaded NPT Female | 50 psi @ 72° F | -20° to 125° | 13/16" | 6" | Aluminum | Manual | UL Listed | 0000000 | 00000 |
Threaded Swivels for Hose Nozzles
To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.
Anodized aluminum swivels have good corrosion resistance and are lighter in weight than chrome-plated brass swivels. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.
Straight swivels rotate at the female connection point only. They are also known as inline swivels.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | ||||||
|---|---|---|---|---|---|---|
Anodized Aluminum | ||||||
| 1 1/4 × 1 1/4 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/2" | 0000000 | 0000000 |
| 1 1/2 × 1 1/2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 5" | 0000000 | 000000 |
| 2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 0000000 | 000000 |
Chrome-Plated Brass | ||||||
| 1 1/4 × 1 1/4 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/2" | 0000000 | 000000 |
| 1 1/2 × 1 1/2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 5" | 0000000 | 000000 |
| 2 × 2 | Threaded NPT Female × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 6 3/8" | 0000000 | 000000 |
Container | |||||
|---|---|---|---|---|---|
| Size, fl. oz. | Type | Max. Pressure for Fluids, psi | Temp. Range, °F | Each | |
For Use With Gasoline, Diesel Fuel, Hydraulic Oil, and Coolant | |||||
| 4 | Brush-Top Can | 10,000 | -100° to 600° | 00000000 | 000000 |
Barbed Swivels for Hose Nozzles
Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely. They are also known as inline swivels. Swivels are anodized aluminum, which is lightweight with good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Anodized Aluminum | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Pipe Size | Connection | Max. Pressure | Temperature Range, °F | Lg. | Each | |
For Use With Gasoline, Hydraulic Fluid, and Coolant | |||||||
| 1" | 1 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 2 13/16" | 0000000 | 000000 |
| 1 1/4" | 1 1/4 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 3 7/8" | 0000000 | 000000 |
| 1 1/2" | 1 1/2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 1/8" | 0000000 | 000000 |
| 2" | 2 | Barbed Male × Threaded NPT Male | 150 psi @ 72° F | -65° to 250° | 4 11/16" | 0000000 | 000000 |
Couplers for High-Pressure Fill Valves
Fill tanks and recharge struts—these couplers join hose to high-pressure fill valves with Schrader threads.
Some couplers meet SAE AS4395, an automotive industry standard for flared fitting dimensions.
70° elbow couplers are angled to access hard-to-reach valves.
Couplers with a shut-off valve let you control the flow of air by hand. When used with Schrader valves that have a core, the core depressor pin in these couplers press valves open to let air flow in.
For technical drawings and 3-D models, click on a part number.
Female Threaded Hose ×
NPT Female Threaded Pipe
Female Threaded Hose ×
NPT Threaded Male Pipe
Threaded Hose × UN/UNF
Male Flared Tube
Female Threaded Hose ×
UN/UNF Male Flared Tube
Female Threaded Hose ×
UN/UNF Male Flared Tube
Inlet | Outlet | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Material | Thread Size | Material | Flared Angle | For Tube OD | Material | Max. Pressure, psi | Temp. Range, °F | Features | Specifications Met | Each | |
Straight | ||||||||||||
| 0.305"-32 | Zinc-Plated Steel | 7/16"-20 | Stainless Steel | 37° | 1/4" | __ | 5,000 | -20° to 250° | __ | SAE AS4395 | 000000 | 000000 |
70° Elbow | ||||||||||||
| 0.305"-32 | __ | 7/16"-20 | __ | 37° | 1/4" | Brass | 5,000 | Not Rated | __ | __ | 000000 | 00000 |
90° Elbow with a Shut-Off Valve | ||||||||||||
| 0.305"-32 | __ | 3/8"-24 | __ | 37° | 3/16" | Brass | 3,000 | -40° to 160° | Core Depressor Pin | SAE AS4395 | 000000 | 00000 |
| 0.485"-26 | __ | 3/8"-24 | __ | 37° | 3/16" | Brass | 3,000 | -40° to 160° | Core Depressor Pin | __ | 000000 | 00000 |