Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers. They include one faucet and can fit up to three, so you can access different types of oil at a single centralized point.

Measure oil as it’s dispensed. The display shows flow rate in pints, quarts, gallons, or liters, and total volume in gallons or liters.

A safety lock on the handle prevents accidental dispensing.

For style A, press on the container bottom to dispense. Styles B-D have a flow-control lever that allows you to vary the amount of oil dispensed from a single drop to a stream.

Deliver a mist of oil using shop air. A knob on the handle adjusts the amount of oil dispensed. Twist the dispensing tip to adjust the spray pattern. Flow rate depends on temperature.

These dispensers have an opening for filling without removing the nozzle. They have a flow-control lever that allows you to vary the amount of oil dispensed from a single drop to a stream.

Pull the trigger on these dispensers for easier one-hand operation than standard hand-held oil dispensers.

Style C have an adjustable spray pattern; twist the knurled dispensing tip to adjust from a thin stream to a fine mist.

Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line.

Long-neck weld flanges have a square-cut end for welding directly to a pressure vessel or tank. With a longer neck than butt-weld flanges, they stick out farther from your tank wall for easier access to bolts. These flanges eliminate the need to weld a flange to a length of pipe.

Forged flanges have better strength than cast flanges. 304 stainless steel flanges offer very good corrosion resistance, and 316 stainless steel flanges have excellent corrosion resistance.