We will reply to your message within an hour.
More
These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.
The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.
Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.
A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.
A quick-disconnect hose fitting on these nozzles means you can remove and replace them easily to change spray patterns and angles.
A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.
Particles in liquid won’t clog these nozzles because of their unique internal and external design.
These nozzles project their spray at a right angle from their threaded connection.
Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.
The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.
With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.
These nozzles provide a uniform distribution of droplets.
A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.
Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.
Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.
A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.
No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.
The superior cleaning ability of a solid stream has been combined with rotating spray action for excellent coverage.
Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.
No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.
Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.
Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.
FM approved for use in fire-protection applications, these nozzles produce a heavy, coarse spray to quickly put out fires.
Attaching a spray nozzle to these swivel fittings allows the nozzle to swivel 360° and tilt on a 45° range.
These premium nozzles are engineered for the most efficient airflow consumption.
Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.
Attach to your blowgun to direct airflow.
The extra length allows access into hard-to-reach areas.
Nozzles are attached to a flexible hose that bends and holds its shape until you reposition it.
Blow debris and sweep it away with the built-in brush.
Twist the barrel to adjust water flow.
There’s no shut-off valve on these nozzles, so water instantly flows.
Use the lever to turn water flow on and off.
Dispense and control the flow of coolant with these nozzles.
Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.
Conduct electricity to your contact tip and evenly distribute shielding gas for high-quality welds.
Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.
Provide a connection for hose cocks, needle valves, and nozzles by attaching these flanges and turrets to your supply pipe.
These nozzles are also known as bubblers.
View pressure readings on an easy-to-read digital display.
A bar slides out of the top of these gauges to display pressure reading.
View pressure readings on a numbered dial.