We will reply to your message within an hour.
More
These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.
The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.
Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.
A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.
Particles in liquid won’t clog these nozzles because of their unique internal and external design.
Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.
The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.
With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.
These nozzles provide a uniform distribution of droplets.
A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.
A check valve prevents the nozzle from dripping when it is turned off.
Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.
A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.
These nozzles produce a flat, thin spray pattern.
Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.
Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.
By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.
Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.
Use these nozzles with detergent that’s diluted in water to create a rotating, multi-directional foam spray for effectively rinsing tanks, drums, and small vessels.
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.
Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.
Certified by 3-A to meet sanitary design standards, these nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.
Specifically designed for steam, these nozzles direct steam better than standard spray nozzles.
Attaching a spray nozzle to these swivel fittings allows the nozzle to swivel 360° and tilt on a 45° range.
Drill a hole in your pipe and connect one of these fittings to create a connection point for a spray nozzle or swivel fitting.
Build a spray system by adding your own nozzles to these nozzle-ready spray manifolds.
These premium nozzles are engineered for the most efficient airflow consumption.
Control consumption and noise by adjusting the airflow.
Extend these telescoping nozzles to increase your reach.
The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.
These nozzles are made of FDA-listed materials.
Adjust airflow to control consumption and noise.
At less than 2" long and with a wide airflow pattern, these nozzles are ideal for tight spaces where you need to distribute air over a wider area than a focused-airflow nozzle.
Air blows out of these nozzles at a right angle in a wide pattern, distributing air over a wider area than focused-airflow nozzles.
Air blows out of these flat nozzles in a wide pattern at a 90° angle from the inlet, distributing air over a wider area than focused-airflow nozzles. They’re FDA compliant 21 CFR 110.40 for use in the food industry.
These needle-style nozzles force air to a precise pinpoint.
Focus air with pinpoint precision.
Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.
Choose a base, hose, and nozzle for a custom setup.
Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.
Create a sheet of high-velocity air.
Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.
Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.
Add faucets to oil dispensing stations for increased utility.
Bolt two same-size flanges together with a gasket to create an access point within a pipe line.
Keep torch tips clear for a pinpoint flame.
Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.
Attach these nozzles to your high-pressure water line to flush grit and grime out of blocked pipes.
Set the thermostat and these vortex tubes switch on only when needed.
Cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.
Quietly cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.
Quietly cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.
Cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.
These NEMA-rated vortex tube are designed to keep water out during washdowns.
Vortex tubes convert compressed air into a stream of cold air.
Kits include one vortex tube for converting compressed air into a stream of cold air as well as airflow adjusters, a cold-air muffler, a tube fitting, and tubing.