Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support.

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

Often used as padding in helmets, gloves, and boots, this super-strong EVA foam absorbs shock and resists tearing better than other types of foam.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

Use these foam half rounds as a cushioning bumper.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.

Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

These sheets and strips will bounce back to shape, even after extended compression.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

Seal and cushion narrow spaces in hot environments with these silicone foam cords.

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Made of Buna-N foam, these sheets offer excellent oil resistance. They also resist fuel and solvents.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

Know at a glance when a tool is missing from a toolbox with this dual-color foam.

Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.

This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

Either a urethane or polyester coating protects these humidity-resistant polyurethane foam sheets from oil exposure. Use them to quiet noisy areas and line machine enclosures.

These polypropylene foam sheets will not degrade if exposed to moisture and occasional salt water spray. Use them to quiet noisy areas and line machine enclosures.

Made of melamine foam, these sheets meet UL 94 V-0 for flame retardance and ASTM E84 5/20 for flame and smoke. Use them to quiet noisy areas and line machine enclosures. Sheets are peaked on one side for more sound-absorbing area than flat-surface sheets.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.

These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems.

Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.

Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.

Made of soft expanded PTFE, these gaskets are virtually chemically inert.

Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.

Even at high temperatures, these tubes remain flexible to stretch over components without tearing. They restrict absorption of water, air, and gas and are typically used on hot and cold water lines and electrical components.

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

These sheets resist the absorption of water, air, and gas and are widely used in cold-storage and packaging applications.

Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour.

Cover large areas with this two-part expanding foam insulation.

The perforated vinyl facing allows moisture to evaporate and resists cracking and fading. These flexible sheets are good for insulating large enclosures.

The lowest-density insulation we offer, these sheets are made of lightweight melamine foam.

Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

These seals have solid construction.

Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.

The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.

More compressible than seals with a solid bulb, these seals have a hollow bulb.

Use this urethane foam for a variety of prototyping applications.

Commonly used in molding applications such as injection molding and extrusion, these foaming agents reduce weight, warpage, and sinks in finished parts.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Mount lightweight signs and trim with this economical tape.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

Prevent the spread of fire while sealing, cushioning, and damping vibration. This tape has adhesive on both sides.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

This tape can withstand temperatures up to 300° F.

The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.

Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.

This tubular foam tape compresses to fill the gaps around door jambs and other openings that flat masking tape can't.

Add stiffness to composite sandwiches without adding a lot of weight.

Peanuts loosely fill the space around items of any shape to prevent movement and reduce impact during shipment.

Create custom-fitted packaging for products of almost any size or shape. When activated, foam packs expand to fill the space around items.

You only need one free hand to tear a sheet of wrap from the box.

Shield industrial components and other items from scratches during shipping.

Cut these grips to your desired length. All have two open ends to position them anywhere along a handle.

Add or replace worn grips on round and irregularly shaped handles on hammers, axes, and other hand tools. These grips have a removable spiral-wound core. Slide them on a handle and use the tab to pull out the core. The grips contract and conform to your handle as the core is removed. Made of EPDM foam, they insulate and cushion vibration.

Made of vinyl foam, these grips insulate and cushion vibration. They are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them.

The adhesive backing keeps these grips in place. Made of EPDM foam, they are three times thicker than standard wrap-on grips to insulate and cushion vibration.

This trim withstands temperatures up to 450° F—more than twice as high as other foam trim. Designed to cushion during impact, it protects equipment and surfaces from damage.

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Often used in filtering, this brittle, glass-like carbon has pores that allow fluid and air to flow through.

Good for food preparation areas, these earplugs have an enclosed ball bearing that can be sensed by metal detectors.

Reduce exposure to loud background noise from nearby machinery without blocking out voices. Instead of muffling all sound like other earplugs, these soften sound to enable clear communication.