These locknuts are about half the height of standard nylon-insert locknuts. Use them in light duty low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

Zinc-plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Half the height of standard nylon-insert locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. They have a nylon insert that grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Made from Grade 8 steel, they're about 25% stronger than medium-strength steel thin locknuts. All have a finish that resists corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Half the height of standard nylon-insert locknuts, use these locknuts in low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. These nuts are suitable for fastening most machinery and equipment when used in conjunction with a standard hex nut. All have a finish that resists corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

These locknuts have good chemical resistance and may be mildly magnetic. They're about half the height of standard nylon-insert locknuts. Use them in low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use.

For technical drawings and 3-D models, click on a part number.

An irregularly shaped thread at the top of the nut grips the bolt for a stronger hold than nylon-insert locknuts. They thread on from the bottom of the nut, allowing more threads to engage the bolt before tightening for easier installation than center-lock distorted thread locknuts. The strength of the bolt should match the strength of the nut to prevent damaging threads. They're not reusable. Comparable in strength to Grade 8 bolts, they're about 25% stronger than medium-strength steel locknuts.

Black-phosphate, zinc-plated, and zinc yellow-chromate-plated locknuts resist corrosion in wet environments.

Cadmium-plated locknuts resist corrosion in wet environments and have good lubricity, so they thread on smoothly.

For technical drawings and 3-D models, click on a part number.

These locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts. They thread on from the bottom of the nut, allowing more threads to engage the bolt before tightening for easier installation than center-lock distorted thread locknuts. The strength of the bolt should match the strength of the nut to prevent damaging threads. They're not reusable. Made from Grade 5 steel, they're suitable for fastening most machinery and equipment.

Black-oxide locknuts are mildly corrosion resistant in dry environments and blend in with dark surfaces.

Zinc-plated locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

These locknuts have an irregularly shaped thread in the middle of the nut that grips the bolt for a stronger hold than nylon-insert locknuts. Also known as reversible locknuts, they can be threaded on from either end. They're about three times stronger than low-strength steel locknuts. The strength of the bolt should match the strength of the nut to prevent damaging threads. They're not reusable.

Black-oxide steel locknuts have a dark surface color and are mildly corrosion resistant in dry environments.

Zinc yellow-chromate plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

An irregularly shaped thread in the middle of the nut grips the bolt for a stronger hold than nylon-insert locknuts. Also known as reversible locknuts, they can be threaded on from either end. The strength of the bolt should match the strength of the nut to prevent damaging threads. They're not reusable. Use them in light duty fastening applications, such as securing access panels. A zinc plating provides corrosion resistance in wet environments.

For technical drawings and 3-D models, click on a part number.

These locknuts have good chemical resistance and may be mildly magnetic. They have an irregularly shaped thread in the middle of the nut that grips the bolt for a stronger hold than nylon-insert locknuts. Also known as reversible locknuts, they can be threaded on from either end. The strength of the bolt should match the strength of the nut to prevent damaging threads. They're not reusable.

For technical drawings and 3-D models, click on a part number.

Threads at the top of these locknuts expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts. The strength of the bolt should match the strength of the nut to prevent damaging the threads. These locknuts have equivalent strength to Grade 8 steel locknuts.

Cadmium-plated steel locknuts are corrosion resistant in wet environments. The plating adds lubricity, so they thread on smoothly.

For technical drawings and 3-D models, click on a part number.

About two-thirds the height of standard flex-top locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. Threads at the top of the nut expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts. The strength of the bolt should match the strength of the nut to prevent damaging threads. These locknuts have equivalent strength to Grade 8 steel locknuts.

Plain steel locknuts are uncoated and ready for painting.

Cadmium-plated locknuts are corrosion resistant in wet environments. The plating adds lubricity so they thread on smoothly.

For technical drawings and 3-D models, click on a part number.

Secure these hex slotted nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. They’re not recommended for use on parts exposed to high vibration because the pin is prone to shearing under prolonged stress. Height includes the slots. Cotter pins are not included. They're zinc plated to resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Secure these hex slotted nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. They’re not recommended for use on parts exposed to high vibration because the pin is prone to shearing under prolonged stress. Height includes the slots. Cotter pins are not included. A zinc plating provides corrosion resistance in wet environments.

For technical drawings and 3-D models, click on a part number.

When installed, the steel insert grips the threads and lifts away from the nut body, isolating the insert from the nut’s load to resist spinoff caused by vibration. These locknuts are often used in shakers and vibrating equipment. The strength of the bolt should match the strength of the nut to prevent damaging threads. Made from Grade 5 steel, they're suitable for fastening most machinery and equipment.

For technical drawings and 3-D models, click on a part number.

About two-thirds the height of standard steel-insert locknuts, use these in low-clearance applications or jam one against a hex nut to hold it in place. When installed, the steel insert grips the threads and lifts away from the nut body, isolating the insert from the nut’s load to resist spinoff caused by vibration. They're often used in shakers and vibrating equipment. The strength of the bolt should match the strength of the nut to prevent damaging threads. Made from Grade 8 steel, these nuts are suitable for fastening most machinery and equipment.

For technical drawings and 3-D models, click on a part number.