McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Snippet
    Nut Type
    Thread Pitch
    Industrial Info Snippet
    Attribute Image
    Fastener Strength Grade/Class
    Industrial Info Compare
    Industrial Info Snippet
    Industrial Info Snippet
    Hex Nut Profile
    Industrial Info Snippet
    Thread Direction
    Industrial Info Snippet
    Thread Type
    Locking Type
    Industrial Info Snippet
    Material
    Thread Spacing
    Industrial Info Compare
    Specifications Met
    Width
    Attribute Image
    Insert Maximum Temperature
    Drive Style
    Industrial Info Snippet
    Industrial Info Snippet
    Thread Fit
    Industrial Info Snippet
    Height
    Attribute Image
    Fastener Strength Rating
    Performance
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3 Products

    Nylon-Insert Locknuts
    3D CAD models available

    Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert
    Max.
    Temp.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M33 × 3.5 mm50 mm33 mmISO Class 10
    		220° FDIN 9851000000000000000
     
    Medium-Strength Steel
    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert
    Max.
    Temp.
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M33 × 2 mm50 mm33 mmISO Class 8
    		220° FDIN 985, ISO 105111000000000000000
    M33 × 3.5 mm50 mm33 mmISO Class 8
    		220° FDIN 985, ISO 10511100000000000000
     
    back to top