McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    2 Products

    Nylon-Insert Locknuts

    Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M39 × 4 mm6039ISO Class 10
    		220DIN 985194645A360000000
     
    Medium-Strength Steel
    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.
    Thread
    Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M39 × 3 mm6039ISO Class 8
    		220DIN 985, ISO 10511190576A523000000
     
    back to top