McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    1 Product

    Locknuts for use with Cotter Pins

    Use these locknuts to secure rotating parts subjected to mild vibration, such as the wheels on carts and hand trucks. They’re not recommended for use on parts exposed to high vibration because the pin can shear under prolonged stress. These nuts are reusable, but you'll need a new cotter pin (not included) with each use.
    Medium-Strength Steel
    Image of ProductInUse. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    Image of Product. Front orientation. Locknuts. Locknuts for use with Cotter Pins.
    These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread Size
    Wd.,
    mm
    Ht.,
    mm
    Fastener Strength
    Grade/Class
    For Cotter
    Pin Dia., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Steel
    M56 × 5.5 mm8557Class 88DIN 935193760A125000000
    Steel Locknut for Use with Cotter Pins, Medium-Strength, Class 8, M56 x 5.5 mm Thread
    Pack of 1In stock
     
    back to top