M6 Locknuts | McMaster-Carr

Filter by

System of Measurement

Nut Type

Material

Locking Type

Height

Finish

Corrosion-Resistant Coated

Phosphate Coated

Zinc Plated

Zinc Yellow-Chromate Plated

Hex Nut Profile

Thread Pitch

Width

Fastener Strength Grade/Class

Thread Type

Performance

Specifications Met

Thread Spacing

Washer Material

400 Series Stainless Steel

Steel

Flange Diameter

14.2 mm

14.25 mm

Fastener Strength Rating

Thread Fit

Thread Direction

Color

Insert Maximum Temperature

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

53 Products

Nylon-Insert Locknuts

Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

High-Strength Steel

Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.

Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Corrosion-Resistant-Coated Steel—These nuts combine a finished appearance with the rust resistance of stainless steel. The coating has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments. Also known as black luster.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	6	ISO Class 10	220	DIN 985	100	000000000	000000


	Black-Corrosion-Resistant-Coated Steel



			M6 × 1 mm	10	6	ISO Class 10	220	DIN 985	5	000000000	00000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



	M6 × 1 mm	10	6	ISO Class 8	220	DIN 985, ISO 10511	100	000000000	000000


	Zinc-Plated Steel



			M6 × 1 mm	10	6	ISO Class 8	220	DIN 985, ISO 10511	100	000000000	0000


			Black-Corrosion-Resistant-Coated Steel



					M6 × 1 mm	10	6	ISO Class 8	220	DIN 985, ISO 10511	5	000000000	00000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these locknuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	6	220	100	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	10	6	220	DIN 985	100	000000000	00000


	Black-Oxide 18-8 Stainless Steel



			M6 × 1 mm	10	6	240	DIN 985	10	000000000	0000


			316 Stainless Steel



					M6 × 1 mm	10	6	220	DIN 985	50	000000000	00000

Serrated Flange Nuts

Serrations bite into material for mild vibration resistance while the flange eliminates the need for a separate washer. These nuts are ideal for securing screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts. You can use them again and again without sacrificing strength. However, the serrations may mar the surface of your material. Also known as collar nuts.

Medium-Strength Steel

Image of Product. Bottom orientation. Flange Nuts. Serrated Flange Nuts.

Rated Grade 5, Grade F, or Class 8, these nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Steel—Best for dry environments since moisture will cause these nuts to rust.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M6 × 1 mm	10	6	14.2	1.1	ISO Class 8	DIN 6923, ISO 4161	100	000000000	00000


		Zinc-Yellow-Chromate-Plated Steel



				M6 × 1 mm	10	6	14.2	1.1	ISO Class 8	DIN 6923, ISO 4161	100	000000000	00000


				Black-Oxide Steel



						M6 × 1 mm	10	6	14.2	1.1	ISO Class 8	DIN 6923	100	000000000	0000


						Steel



								M6 × 1 mm	10	5.5	14.25	2.2	ISO Class 8	—	25	000000000	00000

High-Strength Steel

Rated Grade 8, Grade G, or Class 10, these are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, and motors. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these nuts to rust.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M6 × 1 mm	10	6	14.2	1.1	ISO Class 10	DIN 6923	50	000000000	000000


		Steel



				M6 × 1 mm	10	6	14.2	1.1	ISO Class 10	DIN 6923	50	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Highly-Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant flange nuts, these hold up in just about any environment, including harsh weather, salt water, and most chemicals.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		M6 × 1 mm	10	6	14.2	1.18	DIN 6923	50	000000000	00000


		Highly-Corrosion-Resistant 316 Stainless Steel



				M6 × 1 mm	10	6	14.2	1.18	DIN 6923	25	000000000	0000

Nylon-Insert Flange Nuts

A nylon insert grips the screw for a stronger hold than a serrated flange, without damaging threads or marring the surface of your material. However, the insert may become brittle if exposed to high temperatures. These nuts have a flange that distributes pressure evenly across the mounting surface, so you don't need a separate washer. They are ideal for securing screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts. You can reuse them a handful of times, but their holding power will decrease with each use. Also known as collar nuts.

Medium-Strength Steel

Image of Product. Front orientation. Flange Nuts. Nylon-Insert Flange Nuts.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black Corrosion-Resistant-Coated Steel—Combines a finished appearance with the rust resistance of stainless steel. The coating has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments. Also known as black luster.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M6 × 1 mm	10	9.1	14.2	1.1	ISO Class 8	DIN 6926	250	100	000000000	00000


		Black Corrosion-Resistant-Coated Steel



				M6 × 1 mm	10	9.1	14.2	1.1	ISO Class 8	DIN 6926	250	5	000000000	0000

High-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M6 × 1 mm	10	9.1	14.2	1.1	ISO Class 10	DIN 6926	250	25	000000000	000000


		Zinc-Yellow-Chromate-Plated Steel



				M6 × 1 mm	10	9.1	14.2	1.1	ISO Class 10	DIN 6926	250	50	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Specs. Met	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		M6 × 1 mm	10	9.1	14.2	1.1	DIN 6926	250	10	000000000	000000

Thin-Profile Nylon-Insert Locknuts

About half the height of standard-profile locknuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

Low-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	6	245	ISO 10511	10	000000000	00000

High-Profile Nylon-Insert Locknuts

Slightly taller than standard-profile locknuts, these have a larger gripping area so your wrench or socket won't slip off as you tighten them. They're often used in vehicles and machinery where fasteners can be difficult to reach. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.

High-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	8	ISO Class 10	220	DIN 982	50	000000000	000000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



	M6 × 1 mm	10	8	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	000000


	Zinc-Plated Steel



			M6 × 1 mm	10	8	ISO Class 8	220	DIN 982, ISO 7040	100	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

	Wd., mm	Ht., mm	Insert Max. Temp., ° F	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	10	8	220	DIN 982	25	000000000	00000


	316 Stainless Steel



			M6 × 1 mm	10	8	220	DIN 982	10	000000000	0000

Top-Lock Distorted-Thread Locknuts

Irregularly shaped threads at the top of these locknuts grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.

High-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Phosphate-Coated Steel—The dark coating creates both a finished appearance and a barrier against rust that's comparable to zinc yellow-chromate plating.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel



	M6 × 1 mm	10	6	ISO Class 10	100	000000000	000000


	Zinc-Plated Steel



			M6 × 1 mm	10	6	ISO Class 10	100	000000000	00000


			Black-Phosphate-Coated Steel



					M6 × 1 mm	10	6	ISO Class 10	25	000000000	0000

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	6	ISO Class 8	DIN 980V	100	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd., mm	Ht., mm	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	10	6	DIN 980, ISO 7042	10	000000000	00000

Locknuts with External-Tooth Lock Washer

To save on assembly time, these locknuts combine a hex nut with a free-spinning lock washer, so you can twist them into place by hand. Once the nut is against your material surface, tighten it down with a wrench or socket to get the teeth to bite. Although these nuts install more quickly than nylon-insert locknuts, they don't hold up as well against vibration and can mar your material. As long as the washer stays intact, you can reuse them. Also known as Keps and K-lock nuts.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

Black-Zinc-Plated Steel—The dark zinc plating withstands occasional exposure to moisture while creating a finished look.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Washer OD, mm	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	6.2	ISO Class 8	12	100	000000000	000000


	Black-Zinc-Plated Steel



			M6 × 1 mm	10	6.2	ISO Class 8	12	50	000000000	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd., mm	Ht., mm	Washer OD, mm	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	10	6.2	11.5	25	000000000	00000


	Black-Oxide 18-8 Stainless Steel



			M6 × 1 mm	10	6.2	11.5	25	000000000	00000

Distorted-Thread Flange Nuts

The strongest hold of all the flange nuts we offer, these have irregularly shaped threads that grip the screw to resist loosening. The threads prevent the nut from backing out due to high vibration, but they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch, so they are not reusable. Nuts have a flange that distributes pressure evenly across the mounting surface without the need for a separate washer. They are ideal for securing screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts. Also known as collar nuts.

Medium-Strength Steel

Image of Product. Bottom orientation. Flange Nuts. Distorted-Thread Flange Nuts.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M6 × 1 mm	10	7.3	14.2	1.1	ISO Class 8	DIN 6927	50	000000000	000000

High-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

				Flange, mm
	Thread Size	Wd., mm	Ht., mm	Dia.	Thk.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



		M6 × 1 mm	10	7.3	14.2	1.1	ISO Class 10	DIN 6927, EN 1664, ISO 7044	50	0000000	000000


		Black-Oxide Steel



				M6 × 1 mm	10	7.3	14.2	1.1	ISO Class 10	DIN 6927, EN 1664, ISO 7044	25	0000000	0000

Spring-Stop Locknuts

These locknuts withstand heavy vibration similar to distorted-thread nuts, and you can use them over and over. The prongs at the top bend when tightened to create tension for a secure hold. As you remove the locknut, the prongs spring back to their original shape, so you can install the nut again without losing holding power. Also known as Fuji locknuts.

Low-Strength Steel

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	5.1	ISO Class 6	10	000000000	000000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd., mm	Ht., mm	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	10	5.1	5	000000000	000000

Center-Lock Distorted-Thread Locknuts

Also known as reversible locknuts, these thread on from either side, so you don't have to worry about fastening them incorrectly and damaging your screw. The irregularly shaped threads in the middle grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	5	ISO Class 8	10	000000000	000000

Flex-Top Locknuts for Heavy Vibration

The top section of these nuts expands to grip the screw on all sides for a stronger hold than both nylon-insert and distorted-thread locknuts. They’re often used in equipment with constant, vigorous vibration, such as engines. These locknuts are reusable a handful of times, but the holding power decreases with each use.

Steel

These locknuts have equivalent strength to Grade 8 and Class 10 steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Cadmium-Plated Steel—These locknuts have good lubricity to thread on smoothly and ease installation. The plating also creates a barrier against rust that's comparable to zinc-yellow-chromate plating.

	Wd., mm	Ht., mm	Pkg. Qty.		Pkg.
Black-Oxide Steel



	M6 × 1 mm	10	7.8	1	000000000	00000


	Cadmium-Plated Steel



			M6 × 1 mm	10	7.8	5	000000000	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these locknuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

316 Stainless Steel—Our most corrosion-resistant nuts, these hold up in just about any environment. They won't degrade from exposure to weather, salt water, and most chemicals.

	Wd., mm	Ht., mm	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	10	7.8	1	000000000	00000


	316 Stainless Steel



			M6 × 1 mm	10	7.8	1	000000000	0000

Cap Nuts with Threadlocker

These nuts not only conceal and protect protruding screw threads, they also resist loosening from mild vibration. They have a nylon patch bonded to their threads that grips screws for a tighter hold than standard cap nuts. They’re reusable a handful of times, but the patch’s holding power decreases with each use. Also known as acorn nuts, they have a smooth, rounded head that creates a finished look.

Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Thread Dp., mm	Wd., mm	Ht., mm	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M6 × 1 mm	5.7	10	12	DIN 1587	5	000000000	000000

Nylon-Insert Cap Nuts

Get the protection of a cap nut with the vibration resistance of a locknut. These nuts not only conceal protruding screw threads, they also have a nylon insert that grips the screw to prevent loosening from moderate vibration. However, the insert may become brittle if exposed to high temperatures. Nuts are reusable a handful of times, but their holding power decreases with each use.

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength steel nuts. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Thread Dp., mm	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Insert Max. Temp., ° F	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	3.9	10	12	ISO Class 6	DIN 986	245	25	000000000	00000

Locknuts with Spring-Lock Washer

The curved, spring-like washer grips surfaces more tightly than tooth-lock washers for better vibration resistance. These locknuts also install just as quickly since you can twist them into place by hand. Once the nut is against your material, tighten it down with a wrench or socket. The washer's smooth edges won't mar the surface like teeth can. As long as the washer stays intact, you can reuse these locknuts.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Washer OD, mm	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	6.6	ISO Class 8	14	50	000000000	00000


	Black-Oxide Steel



			M6 × 1 mm	10	6.6	ISO Class 8	14	25	000000000	0000

Locknuts for use with Cotter Pins

Use these locknuts to secure rotating parts subjected to mild vibration, such as the wheels on carts and hand trucks. They’re not recommended for use on parts exposed to high vibration because the pin can shear under prolonged stress. These nuts are reusable, but you'll need a new cotter pin (not included) with each use.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	For Cotter Pin Dia., mm	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel



	M6 × 1 mm	10	7.5	ISO Class 8	1.6	DIN 935	5	000000000	00000

Self-Aligning Press-Fit Locknuts for Sheet Metal

Fasten together unaligned parts and keep screws in place. The threaded hole within these press-fit nuts shifts up to .01" in any direction, so you can fasten together thin panels with off-center holes. The irregularly shaped threads tightly grip screws to prevent them from loosening or backing out under vibration.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust and mild chemicals.

					Head, mm		Barrel, mm
	Thread Size	Drill Bit Size, mm	For Min. Panel Thk., mm	For Maximum Panel Hardness	OD	Ht.	Dia.	Ht.	PEM® Part No.	Pkg. Qty.		Pkg.
Distorted-Thread Locking







				18-8 Stainless Steel

				M6 x 1 mm	13.1	1.38	Brinell 125, Rockwell B70	15.24	1.38	7.2	7.9	LAC-M6-2MD	1	000000000	00000