Thread Size Thread Size |
|---|
|
|
|
Nut Type Nut Type | Show |
|---|
|
Nut Type Nut Type | Hide |
|---|
Thread Type Thread Type |
|---|
|
Thread Direction Thread Direction |
|---|
 |  |
| Right Hand | Left Hand |
Dynamic Thrust Load Capacity Dynamic ThrustLoad Capacity |
|---|
|
Number of Thread Starts Number of Thread Starts |
|---|
|
Speed Ratio Speed Ratio |
|---|
|
Hardness Hardness |
|---|
|
Tensile Strength Tensile Strength |
|---|
|
Thread Fit Thread Fit |
|---|
|
Number of Mounting Holes Number of Mounting Holes |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Selecting Compatible Lead Screws and Nuts
More
Precision Acme Lead Screws and Nuts
Pair with a motor in automated motion and positioning applications. A tight thread fit allows these lead screws and nuts to make accurate, repeatable starts and stops. Also known as single-start and self-locking lead screws and nuts, they have a single thread that runs the length of the screw. The nut travels only when the screw turns, so your system won’t unexpectedly move when the lead screw is at rest. To ensure compatibility, please select components that have the same thread direction and size.
932 bearing bronze and 673 bronze nuts are wear resistant. They have good machinability and fair corrosion resistance.
Travel distance per turn, also known as screw lead, is the distance a nut moves with one revolution of the lead screw.
For technical drawings and 3-D models, click on a part number.
Platform nuts have wide, machinable surfaces for custom mounting.
| Thread Size | Lg. | Wd. | Ht. | Center Ht. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Each | |
932 Bearing Bronze | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2"-10 | 1 3/4" | 2" | 1 1/8" | 5/8" | 1 | 1:1 | 0.1" | Class 2C | Brinell 65 | 1,200 | 000000 | 0000000 |
| 3/4"-5 | 2 1/4" | 2 5/8" | 1 5/8" | 15/16" | 1 | 1:1 | 0.2" | Class 2C | Brinell 65 | 2,800 | 000000 | 000000 |
| 3/4"-6 | 2 1/4" | 2 5/8" | 1 5/8" | 15/16" | 1 | 1:1 | 0.167" | Class 2C | Brinell 65 | 2,800 | 000000 | 000000 |
| 3/4"-10 | 2 1/4" | 2 5/8" | 1 5/8" | 15/16" | 1 | 1:1 | 0.1" | Class 2C | Brinell 65 | 2,800 | 0000000 | 000000 |
| 1"-4 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.25" | Class 2C | Brinell 65 | 5,000 | 000000 | 000000 |
| 1"-5 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.2" | Class 2C | Brinell 65 | 5,000 | 000000 | 000000 |
| 1"-6 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.167" | Class 2C | Brinell 65 | 5,000 | 000000 | 000000 |
| 1"-10 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.1" | Class 2C | Brinell 65 | 5,000 | 0000000 | 000000 |
| 1 1/2"-4 | 4 1/2" | 3 5/8" | 2 9/16" | 1 1/2" | 1 | 1:1 | 0.25" | Class 2C | Brinell 65 | 11,000 | 000000 | 000000 |
Platform nuts have wide, machinable surfaces for custom mounting.
| Thread Size | Lg. | Wd. | Ht. | Center Ht. | No. of Thread Starts | Speed Ratio | Travel Distance per Turn | Thread Fit | Hardness | Dynamic Thrust Load Cap., lbs. | Each | |
932 Bearing Bronze | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2"-10 | 1 3/4" | 2" | 1 1/8" | 5/8" | 1 | 1:1 | 0.1" | Class 2C | Brinell 65 | 1,200 | 0000000 | 0000000 |
| 3/4"-5 | 2 1/4" | 2 5/8" | 1 5/8" | 15/16" | 1 | 1:1 | 0.2" | Class 2C | Brinell 65 | 2,800 | 0000000 | 000000 |
| 3/4"-6 | 2 1/4" | 2 5/8" | 1 5/8" | 15/16" | 1 | 1:1 | 0.167" | Class 2C | Brinell 65 | 2,800 | 0000000 | 000000 |
| 3/4"-10 | 2 1/4" | 2 5/8" | 1 5/8" | 15/16" | 1 | 1:1 | 0.1" | Class 2C | Brinell 65 | 2,800 | 0000000 | 000000 |
| 1"-4 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.25" | Class 2C | Brinell 65 | 5,000 | 0000000 | 000000 |
| 1"-5 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.2" | Class 2C | Brinell 65 | 5,000 | 0000000 | 000000 |
| 1"-6 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.167" | Class 2C | Brinell 65 | 5,000 | 0000000 | 000000 |
| 1"-10 | 3" | 3" | 1 15/16" | 1 1/8" | 1 | 1:1 | 0.1" | Class 2C | Brinell 65 | 5,000 | 0000000 | 000000 |
| 1 1/2"-4 | 4 1/2" | 3 5/8" | 2 9/16" | 1 1/2" | 1 | 1:1 | 0.25" | Class 2C | Brinell 65 | 11,000 | 0000000 | 000000 |
Metric Ball Screws and Nuts
Internal ball bearings provide smooth low-friction travel in applications that require high speeds, accurate positioning, and repeatable movement. Also known as single-start ball screws and nuts, these have a single thread that runs the length of the screw. They operate with more torque than fast-travel ball screws and nuts. To ensure compatibility, select components that have the same thread size and pitch. Ball nuts are furnished with a tube to keep ball bearings in place. Do not remove the tube until you are ready to install the nuts onto the screws.
Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch, mm | Lg., mm | Wd., mm | Ht., mm | Center Ht., mm | No. of Thread Starts | Travel Distance per Turn, mm | Hardness | Dynamic Thrust Load Cap., lbs. | Max. Backlash, mm | Includes | Temperature Range, °F | Each | |
Alloy Steel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M14 | 4 | 35 | 34 | 30 | 13 | 1 | 4 | Rockwell C58 | 1,200 | 0.1 | __ | 5° to 175° | 0000000 | 0000000 |
| M16 | 5 | 36 | 42 | 32.5 | 16 | 1 | 5 | Rockwell C58 | 1,120 | 0.1 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M16 | 5 | 36 | 42 | 32.5 | 16 | 1 | 5 | Rockwell C58 | 1,200 | 0.1 | __ | 5° to 175° | 0000000 | 000000 |
| M20 | 5 | 35 | 48 | 39 | 17 | 1 | 5 | Rockwell C58 | 1,300 | 0.1 | __ | 5° to 175° | 0000000 | 000000 |
| M20 | 10 | 58 | 48 | 46 | 18 | 1 | 10 | Rockwell C58 | 2,350 | 0.1 | __ | 5° to 175° | 0000000 | 000000 |
| M25 | 5 | 35 | 60 | 45 | 20 | 1 | 5 | Rockwell C58 | 1,500 | 0.1 | __ | 5° to 175° | 0000000 | 000000 |
| M25 | 10 | 94 | 60 | 55 | 23 | 1 | 10 | Rockwell C58 | 7,000 | 0.1 | __ | 5° to 175° | 0000000 | 000000 |
| M18 | 8 | 56 | 48 | 44 | 17 | 1 | 8 | Rockwell C58 | 2,940 | 0.1 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M28 | 6 | 42 | 60 | 50 | 22 | 1 | 6 | Rockwell C58 | 1,570 | 0.1 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M28 | 6 | 67 | 60 | 50 | 22 | 1 | 6 | Rockwell C58 | 2,870 | 0.1 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M32 | 10 | 64 | 70 | 62 | 26 | 1 | 10 | Rockwell C58 | 4,440 | 0.2 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M32 | 10 | 94 | 70 | 62 | 26 | 1 | 10 | Rockwell C58 | 8,080 | 0.2 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M36 | 10 | 64 | 86 | 67 | 29 | 1 | 10 | Rockwell C58 | 4,670 | 0.2 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M36 | 10 | 96 | 86 | 67 | 29 | 1 | 10 | Rockwell C58 | 8,490 | 0.2 | Seals | Not Rated to 175° | 00000000 | 000000 |
| M45 | 12 | 115 | 100 | 80 | 36 | 1 | 12 | Rockwell C58 | 11,100 | 0.2 | Seals | Not Rated to 175° | 0000000 | 000000 |