McMaster-Carr logo
    Filter by
    System of Measurement
    Thread Size
    Industrial Info Compare
    Nut Type
    Industrial Info Compare
    Hex Nut Profile
    Industrial Info Compare
    Fastener Strength Grade/Class
    Industrial Info Compare
    Thread Type
    Material
    Thread Direction
    Specifications Met
    Thread Spacing
    Industrial Info Snippet
    Fastener Strength Rating
    Export Control Classification Number (ECCN)
    DFARS Specialty Metals
    Locking Type
    Drive Style
    Industrial Info Snippet
    Sold As
    Color
    Insert Maximum Temperature
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3 Products

    Hex Nuts

    The most commonly used hex nuts, these are suitable for fastening most machinery and equipment.
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Steel
    2 1/4"-12
    		3 3/8"1 15/16"SAE Grade 2
    		ASME B18.2.21000000000000000
     

    Thin-Profile Hex Nuts

    About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.
    Low-Strength Steel
    Image of Product. Front orientation. Hex Nuts. Thin-Profile Hex Nuts.
    Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Pkg.
    Qty.
    Pkg.
    Steel
    2 1/4"-12
    		3 3/8"1 7/32"SAE Grade 2
    		1000000000000000
     

    Thin-Heavy-Profile Nylon-Insert Locknuts

    About half the height of standard-profile locknuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against a hex nut to hold it in place. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Image of Product. Front orientation. Locknuts. Thin-Heavy-Profile Nylon-Insert Locknuts.
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Black-Phosphate-Coated Steel—The dark coating creates both a finished appearance and a barrier against rust that's comparable to zinc yellow-chromate plating.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Each
    Black-Phosphate-Coated Steel
    2 1/4"-12
    		3 1/2"1 15/16"ASTM Grade C
    		250000000000000000
     
    back to top