These nuts are suitable for fastening most machinery and equipment.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

Choose these nuts for their adherence to strict military standards for material and construction.

These nuts are about 25% stronger than medium-strength steel nuts.

Choose these nuts for their adherence to strict military standards for material and construction.

Tighten these nuts by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

About half the strength of medium-strength steel nuts, these nuts are for light duty fastening applications.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts are about 20% stronger than high-strength steel nuts and are often used in heavy machinery.

These nuts have good chemical resistance and may be mildly magnetic.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts have excellent chemical resistance and can be used in saltwater environments.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

Made from nylon 6/6, these nuts resist oil, grease, and solvents (except mineral acids).

Fiberglass nuts are stronger than nylon 6/6 nuts. They resist acids, solvents, salt water, and oil.

These nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

One-third the weight of steel, these aluminum nuts are corrosion resistant in wet evironments and nonmagnetic.

These nuts are resistant to salt water, electrically conductive, and nonmagnetic.

Made from Grade 5 steel, these inch-sized nuts are suitable for most fastening applications.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They’re Grade 5 steel, so you can used these inch-sized nuts for most fastening applications.

These nuts are about 25% stronger than medium-strength steel thin hex nuts. Available in inch thread sizes.

Made from Grade 2 steel, these nuts should be used for light duty fastening applications, such as securing access panels.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. They’re Grade 2 steel, so they can be used for fastening panels and other light duty fastening applications

These nuts have good chemical resistance and may be mildly magnetic.

Choose these nuts for their adherence to strict military standards for material and construction.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

These nuts are corrosion resistant in wet environments,electrically conductive, and nonmagnetic.

These nuts are comparable in strength to Grade 9 bolts.

These nuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel nuts, these nuts can be used in saltwater environments.

These nuts have good chemical resistance.

Includes inch thread sizes. These Grade 8 steel locknuts are 25% stronger than our medium-strength steel nylon-insert locknuts.

Made from Grade 5 steel, these inch-sized locknuts are suitable for fastening most machinery and equipment.

Made from low-strength steel, these locknuts should be used for light duty fastening applications, such as securing.access panels.

Choose these locknuts for their adherence to strict military standards for material and construction. They’re low-strength steel, so they should be used for fastening panels and other light duty fastening applications.

These locknuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel locknuts, these locknuts have excellent resistance to chemicals and salt water.

These locknuts are about half the height of standard nylon-insert locknuts. Use them in light duty low-clearance applications or jam one against a hex nut to hold it in place.

These Grade 8 locknuts are about 25% stronger than medium-strength steel thin locknuts.

Grade 5 locknuts are suitable for fastening most machinery and equipment when used in conjunction with a standard hex nut.

These locknuts have good chemical resistance and may be mildly magnetic.

Choose these locknuts for their adherence to strict military standards for material and construction.

About half the strength of medium-strength steel locknuts, these are for light duty fastening applications, such as securing access panels.

Stainless steel locknuts have excellent corrosion resistance in most environments.

Threads at the top of these locknuts expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts.

Choose these locknuts for their adherence to strict military standards for material and construction.

Known for their strength, these steel locknuts are cadmium plated to resist corrosion in wet environments.

Stainless steel locknuts have excellent corrosion resistance in most environments.

These locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts.

Comparable in strength to Grade 8 bolts, these locknuts are about 25% stronger than medium-strength steel locknuts.

These locknuts have good chemical resistance.

These Grade 8 locknuts are about three times stronger than low-strength steel distorted-thread locknuts.

Use these locknuts for light duty fastening applications, such as securing access panels.

These locknuts have good chemical resistance.

When installed, the steel insert grips the threads and lifts away from the nut body, isolating the insert from the nut’s load to resist spinoff caused by vibration.

About two-thirds the height of standard steel-insert locknuts, use these locknuts in low-clearance applications or jam one against a hex nut to hold it in place.

These locknuts include a flex-top locknut that expands to grip the bolt on all sides and a concave jam nut that clamps the threads onto the bolt for added vibration resistance. They're also known as drake-style nuts.

About half the strength of medium-strength steel flange locknuts, these are for light duty fastening applications, such as securing access panels.

These flange locknuts are comparable in strength to Grade 8 bolts.

Made from Grade 8 steel, these nuts are about 25% stronger than medium-strength steel flange nuts.

About half the strength of medium-strength steel flange nuts, use these nuts in light duty fastening applications, such as securing access panels.

Made from 18-8 stainless steel, these flange nuts have good chemical resistance.

These flange nuts have a black-oxide finish for mild corrosion resistance in dry environments.

The nut head rotates while the flange remains stationary to prevent scratching the material surface as you tighten the nut.

These wing nuts have good chemical resistance and may be mildly magnetic.

About half the strength of medium-strength steel coupling nuts, these nuts are for light duty fastening applications.

Made from Grade 5 steel, these inch-sized coupling nuts are suitable for most applications.

Made from Grade 8 steel, these nuts are about 25% stronger than medium-strength steel coupling nuts. Furnished in inch thread sizes.

These coupling nuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel coupling nuts, these nuts have excellent resistance to chemicals and salt water.

These cap nuts have good chemical resistance and may be mildly magnetic.

These cap nuts have excellent resistance to chemicals and salt water.

About half the strength of medium-strength steel cap nuts, use them in light duty fastening applications, such as securing access panels.

Brass cap nuts are corrosion resistant in wet environments and electrically conductive.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Stainless steel sealing nuts have excellent corrosion resistance in most environments.

About half the strength of medium-strength steel coupling nuts, these metric nuts are for light duty fastening applications.

Use these tube-end weld nuts with left-hand threaded fasteners.

Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.

These nuts attach to high-pressure nipples for compressed gas so you can connect your tank to the inlet of a pressure regulator.

Also known as CGA nuts, these are designed for low-pressure welding applications downstream of your pressure regulator. Attach them to barbed hose fittings for compressed gas to make a threaded connection to torches or pressure regulators.