About half the strength of medium-strength steel nuts, these nuts are for light duty fastening applications, such as securing access panels.

Zinc-plated steel nuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

These nuts have good chemical resistance and may be mildly magnetic. Metric 18-8 stainless steel is also known as A2 stainless steel.

Black-oxide stainless steel nuts have a dark surface color.

For technical drawings and 3-D models, click on a part number.

These nuts have excellent chemical resistance and can be used in saltwater environments. They may be mildly magnetic. They're also known as A4 stainless steel.

Black-oxide stainless steel nuts have a dark surface color.

For technical drawings and 3-D models, click on a part number.

Made from brass, these nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

For technical drawings and 3-D models, click on a part number.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. Commonly used as locknuts, threading a thin nut against any other hex nut prevents loosening caused by vibration. You can also use them as jam nuts by threading two of these thin nuts against each other on a threaded rod to create a gripping point for turning the rod without damaging its threads. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

ISO 4035 nuts are functionally the same as DIN 439B nuts (sometimes called DIN 439-2), but have slightly different width tolerances. These nuts have chamfered edges that make them less sharp than DIN 936 nuts.

For technical drawings and 3-D models, click on a part number.