Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment.

These metric nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

About 25% stronger than medium-strength steel nuts, these nuts are comparable in strength to class 10.9 bolts.

About half the strength of medium-strength steel nuts, these metric nuts are for light duty fastening applications.

These nuts have good chemical resistance and may be mildly magnetic. Metric 18-8 stainless steel is also known as A2 stainless steel.

Tighten these nuts by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

These metric nuts have good chemical resistance and may be mildly magnetic.

These metric nuts resist oil, grease, and solvents (except mineral acids).

Polycarbonate nuts stand up to oil, grease, and detergents.

Polypropylene nuts resist organic solvents and degreasing agents.

These metric nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

One-third the weight of steel, these metric aluminum nuts are corrosion resistant in wet environments and nonmagnetic.

Half as thick as regular hex nuts, these nuts fit into spaces with low height clearances. They are about half as strong as medium-strength steel, and are often used for light duty applications, such as securing access panels.

These nuts should be used for light duty fastening applications, such as securing access panels.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

With threads that tighten to the left and made of 316 stainless steel, these nuts won’t loosen from counterclockwise motion in saltwater and corrosive environments. They’re half the height of standard hex nuts, so they fit where there’s low clearance.

A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel.

Made from medium-strength steel with a nylon insert, these Class 8 metric locknuts are strong enough to use on most machinery and equipment that’s prone to vibration and temperature changes.

Made from low-strength steel, these locknuts should be used for light duty fastening applications, such as securing.access panels.

More corrosion resistant than 18-8 stainless steel locknuts, these metric locknuts have excellent resistance to chemicals and salt water.

These metric locknuts have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.

A conical washer acts as a spring to add tension between the nut and the material surface for easy installation and mild vibration resistance. These metric locknuts have a smooth rim to resist scratching materials when tightened.

These metric locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts.

Strong enough for use with most machinery and equipment, these Class 8 metric locknuts have an irregularly shaped thread in the middle of the nut that grips bolts tighter than nylon-insert locknuts.

Made from stainless steel, these metric flex-top locknuts resist chemicals and may be mildly magnetic.

These locknuts, also known as Fuji locknuts, maintain their holding power with reuse longer than nylon-insert locknuts. They have a spring ring that creates tension as you tighten the nut, keeping them in place.

Strong enough for use in most machinery and equipment, these medium-strength metric nuts have serrations on the underside of the flange. The serrations prevent the nuts from loosening in applications with mild vibration.

Metric 18-8 stainless steel is also known as A2 stainless steel. These flange locknuts have good chemical resistance and may be mildly magnetic.

Also known as collar nuts, these metric nuts have a flange that distributes pressure across the surface, so you don't need a washer. Made of high-strength Class 10 steel, they’re about 25% stronger than medium-strength steel flange nuts.

No need for a washer—these metric medium-strength steel nuts have a flange that distributes pressure across its surface the way a washer does. Made of medium-strength, Class 8 steel, they’re suitable for fastening most machinery and equipment.

About half the strength of medium-strength steel flange nuts, use these metric nuts in light duty fastening applications, such as securing access panels.

These flange nuts have a black-oxide finish for mild corrosion resistance in dry environments.

For light duty applications, choose these metric-sized coupling nuts.

These metric-sized coupling nuts are Class 10 steel, so they’re about 25% stronger than medium-strength steel coupling nuts.

More corrosion resistant than 18-8 stainless steel coupling nuts, these metric nuts have excellent resistance to chemicals and salt water.

One-third the weight of steel, aluminum coupling nuts resist corrosion in wet environments.

These metric cap nuts have good chemical resistance and may be mildly magnetic.

These metric nuts are about half the strength of medium-strength steel cap nuts. Use them in light duty fastening applications, such as securing access panels.

These metric nylon 6/6 cap nuts are chemical resistant, nonconductive, and lightweight.

These metric wing nuts provide more leverage for greater torque while tightening than knurled-head thumb nuts.

Made from 316 stainless steel, these metric wing nuts have excellent chemical resistance and can be used in saltwater environments.

Made from 18-8 stainless steel, these metric thumb nuts have good chemical resistance and may be mildly magnetic.

Use these thumb nuts in low-clearance applications or jam one against another nut to hold it in place.

Weld these metric nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.

Use these metric nuts in channels and tight spaces where round-base weld nuts won't fit.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

About half the strength of medium-strength steel square nuts, use these metric nuts in light duty fastening applications, such as securing access panels.

Two-thirds the height of typical square nuts and made of stainless steel, these metric nuts are designed for use in low-clearance applications in humid, damp, and washdown environments.

Press these metric nuts into a drilled or punched hole with an arbor press or similar pressure tool.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

A hex-shaped body provides the highest twist resistance of any rivet nut.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

The most tamper-resistant nuts we offer, these have a hex head that breaks away upon tightening, leaving a non-removable cone. Install with a standard wrench.

Difficult to grasp with standard hand tools, these metric nuts have sloped sides to reduce the risk of unwanted removal.

Steel inserts have high strength for durability.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

In addition to joining male- and female-threaded parts, these adapters can increase or decrease metric thread sizes and change the thread pitch.

Often called sleeve nuts, these thread adapters fasten parts with right-hand threads to parts with left-hand threads.

Increase or decrease metric thread size from one male-threaded part to another. Commonly used to connect two differently sized threaded rods, they have a hex-shaped body, so you can tighten them with a standard wrench.