M15 Nuts | McMaster-Carr

Precision cut threads make these metric ball screws approximately four times more accurate than standard ball screws. Use them when exact positioning is essential. They come with finished ends and the nut already on, so they’re ready to use right away. The ball nuts have a flange design that makes it easy to mount objects on them. Inside, they have ball bearings to produce smooth, low-friction travel for applications that require high-speed and repeatable movement.

Ball nuts with a thread pitch less than 1 mm have a seal that prevents some contaminants from getting inside them. However, to make sure they don’t create torque and heat, there’s a bit of clearance between the seal and screw, so the seal can’t keep out everything.

Ball nuts with end caps dampen the noise from the ball bearings and make the ball nuts more compact.

Root diameter indicates the diameter the ball screw will be after machining away the threads.

Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.

For technical drawings and 3-D models, click on a part number.

		Ball Screw		Flange Ball Nut
Thread Size	Thread Pitch, mm	Lg., mm	Root Dia., mm	Lg., mm	Dia., mm	No. of Thread Starts	Travel Distance per Turn, mm	Accuracy for Travel Distance per Turn	Hardness	Dynamic Thrust Load Cap., lbs.	Max. Backlash, mm	Includes	Temp. Range, °F		Each
Carbon Steel Ball Screw with Alloy Steel Flange Ball Nut
M15	0.05	321	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	0000000
M15	0.05	371	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	0000000	000000
M15	0.05	421	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	471	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	521	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	571	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	621	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	671	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	721	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	771	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	871	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.05	971	12.5	45	32	2	20	±0.023 mm per 300 mm	Rockwell C58	1,140	0	End Caps	Not Rated to 175°	0000000	00000000
M15	0.1	321	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	000000
M15	0.1	371	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	421	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	471	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	0000000	00000000
M15	0.1	521	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	571	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	621	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	671	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	721	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	771	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	871	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000
M15	0.1	971	12.5	44	34	2	10	±0.023 mm per 300 mm	Rockwell C58	2,020	0	End Caps	Not Rated to 175°	00000000	00000000

Metric Fast-Travel Ball Screws and Nuts

With multiple thread starts, these metric ball screws create linear travel that’s approximately three times faster than ball screws with a single thread start. They’re ideal for applications with an actuator. The ball nuts have internal ball bearings to produce smooth, low-friction travel for applications that require high speed, accurate positioning, and repeatable movement. They come with a tube to keep the ball bearings in place. Do not remove the tube until you’re ready to install the nuts onto the screws. All of these ball nuts have an end cap on each end to stabilize fast-rotating motion. End caps also dampen the noise from the ball bearings and make the ball nuts more compact. Seals on the ball nuts keep out dust.

To ensure compatibility, select components that have the same thread size and pitch.

Ball nuts with four mounting holes have a lower profile than ball nuts with six mounting holes, so they’re better when assembly height clearance is tight.

Root diameter indicates the diameter the ball screw will be after machining away the threads.

Travel distance per turn, also known as screw lead, is the distance a ball nut moves with one revolution of the ball screw.

For technical drawings and 3-D models, click on a part number.

Ball Screws—Right-Hand Threaded

Carbon Steel
Thread Size	Thread Pitch, mm	Lg., mm	No. of Thread Starts	Travel Distance per Turn, mm	Accuracy for Travel Distance per Turn	Root Dia., mm	Hardness	Temp. Range, °F		Each
M15	0.1	500	2	10	±0.210 mm per 300 mm	12.5	Rockwell C58	Not Rated to 175°	00000000	0000000
M15	0.1	1,000	2	10	±0.210 mm per 300 mm	12.5	Rockwell C58	Not Rated to 175°	0000000	000000

Style A Flange Ball Nuts—Right-Hand Threaded

				Flange
Thread Size	Thread Pitch, mm	Lg., mm	Dia., mm	Wd., mm	Ht., mm	Thick., mm	No. of Thread Starts	Travel Distance per Turn, mm	No. of Mounting Holes	Hardness	Dynamic Thrust Load Cap., lbs.	Max. Backlash, mm	Includes	Temp. Range, °F		Each
Alloy Steel
M15	0.1	44	34	57	40	10	2	10	4	Rockwell C58	2,200	0.1	End Caps Seals	Not Rated to 175°	00000000	0000000

Bearing Retaining Locknuts

Carbon Steel

Stainless Steel

Zinc-Plated Steel

With a nylon insert that grips your threaded shaft or spindle without damaging the threads, these locknuts—sometimes called shaft nuts—keep bearings, bushings, gears, and pulleys in place. They won’t shake loose from vibration. However, their nylon insert also means you shouldn’t use these locknuts in applications with high temperatures. Their sides are slotted, so you can tighten and loosen them with a spanner wrench or spanner socket. To reduce the total size and weight of your assembly, they have chamfered edges.

All meet international standards for bearing locknut dimensions.

Carbon steel locknuts are strong and wear resistant. Zinc-plated steel locknuts have an outer layer of zinc that prevents the steel from rusting in wet areas. Compared to stainless steel, they're stronger, more wear resistant, and less costly, but not as corrosion resistant. Avoid exposing them to salt water and chemicals. 303 stainless steel locknuts are nearly as strong as carbon steel but won’t rust in outdoor, washdown, and other corrosive environments.

When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.

For technical drawings and 3-D models, click on a part number.

Metric

Locknuts
Thread									Spanner Sockets
Size	Pitch, mm	Spacing	OD	Wd., mm	Insert Max. Temp., °F	Specifications Met		Each		Each
Carbon Steel
Chamfered Face
M15	1	Extra Fine	25mm	8.5	160°	ISO 2982-2	0000000	00000	00000000	0000000
Zinc-Plated Carbon Steel
Chamfered Face
M15	1	Extra Fine	24mm	8.5	210°	DIN 1805	0000000	00000	000000	00
303 Stainless Steel
Chamfered Face
M15	1	Extra Fine	25mm	8.5	160°	ISO 2982-2	0000000	00000	00000000	000000

Bearing Retaining Nuts

For Chamfered Nuts

Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket. Made of carbon steel, they’re strong and wear resistant.

Use stepped-face retaining nuts with DIN 462 spring lock washers. You can also use them in pairs or with other bearing retaining nuts as jam nuts. For the nut closer to the bearing, position the stepped face towards the bearing. All meet DIN standards for bearing lockout dimensions.

Chamfered-face retaining nuts weigh less and produce less heat than stepped-face nuts. They meet ISO 2982 (formerly DIN 981), an international standard for bearing locknut dimensions. Their sizes correspond to SKF KM series. Use them with DIN 5406 spring lock washers.

For technical drawings and 3-D models, click on a part number.

Nuts
Thread									Optional Washers		Spanner Sockets
Size	Pitch, mm	Spacing	OD, mm	Wd., mm	Specifications Met	For Lock Washer Specifications Met		Each		Each		Each
Carbon Steel
Chamfered Face
M15	1	Extra Fine	25	5	DIN 981, ISO 2982	DIN 5406	0000000	00000	000000000	00000	00000000	0000000

Terms and Conditions and Privacy Policy

Selecting Compatible Lead Screws and Nuts

About Shaft Collars

About Washers

Metric Precision Ball Screws and Nuts

Metric Fast-Travel Ball Screws and Nuts

Bearing Retaining Locknuts

Bearing Retaining Nuts