McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    31 Products

    Plastic Washers

    Image of Product. Front orientation. Washers. Plastic Washers.
    All of these washers are lightweight, nonconductive, and naturally rust resistant. They are commonly used in electronics and automation applications to take the pressure off screws and nuts and protect mounting surfaces.
    Low-Friction Lubricant-Filled Nylon—Reduce friction between the washer, fastener, and mounting surface to prevent sticking when tightening and loosening.
    Temp.
    Range
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Max.,
    ° F
    Specs. Met
    Color
    Pkg.
    Qty.
    Pkg.
    Low-Friction Lubricant-Filled Nylon
    No. 0
    		0.065"0.188"0.008" to 0.012"Not Rated220—Gray500000000000000
    No. 2
    		0.083"0.250"0.018" to 0.022"Not Rated220—Gray50000000000000
    No. 4
    		0.120"0.220"0.028" to 0.034"Not Rated220—Gray50000000000000
    No. 5
    		0.140"0.410"0.037" to 0.043"Not Rated220—Gray50000000000000
    No. 6
    		0.142"0.312"0.028" to 0.034"Not Rated220—Gray50000000000000
    No. 8
    		0.173"0.375"0.028" to 0.034"Not Rated220—Gray50000000000000
    No. 10
    		0.201"0.460"0.028" to 0.034"Not Rated220—Gray50000000000000
    No. 12
    		0.250"0.562"0.060" to 0.067"Not Rated220ASME B18.21.1Gray50000000000000
    No. 12
    		0.262"0.500"0.028" to 0.034"Not Rated220—Gray50000000000000
    1/4"
    		0.322"0.562"0.028" to 0.034"Not Rated220—Gray50000000000000
    5/16"
    		0.383"0.506"0.028" to 0.034"Not Rated220—Gray50000000000000
    7/16"
    		0.469"0.923"0.060" to 0.067"Not Rated220ASME B18.21.1Gray50000000000000
    1/2"
    		0.530"0.880"0.028" to 0.034"Not Rated220—Gray50000000000000
    9/16"
    		0.594"1.156"0.089" to 0.099"Not Rated220ASME B18.21.1Gray50000000000000
    5/8"
    		0.656"1.312"0.089" to 0.099"Not Rated220ASME B18.21.1Gray50000000000000
    3/4"
    		0.812"1.469"0.120" to 0.130"Not Rated220ASME B18.21.1Gray50000000000000
    7/8"
    		0.938"1.750"0.120" to 0.130"Not Rated220ASME B18.21.1Gray50000000000000
    1"
    		1.062"2.000"0.120" to 0.130"Not Rated220ASME B18.21.1Gray50000000000000
    M2
    		2.2 mm5.0 mm0.2 mm to 0.4 mmNot Rated220DIN 125Gray50000000000000
    M3
    		3.2 mm7.0 mm0.4 mm to 0.6 mmNot Rated220DIN 125Gray50000000000000
    M4
    		4.3 mm9.0 mm0.7 mm to 0.9 mmNot Rated220DIN 125Gray50000000000000
    M5
    		5.5 mm10.0 mm0.9 mm to 1.1 mmNot Rated220DIN 125Gray50000000000000
    M6
    		6.4 mm12.0 mm1.4 mm to 1.8 mmNot Rated220DIN 125Gray50000000000000
    M7
    		7.4 mm14.0 mm1.4 mm to 1.8 mmNot Rated220DIN 125Gray50000000000000
    M8
    		8.4 mm16.0 mm1.4 mm to 1.8 mmNot Rated220DIN 125Gray50000000000000
    M10
    		10.5 mm20.0 mm1.8 mm to 2.2 mmNot Rated220DIN 125Gray50000000000000
    M12
    		13.0 mm24.0 mm2.3 mm to 2.7 mmNot Rated220DIN 125Gray50000000000000
    M14
    		15.0 mm28.0 mm2.3 mm to 2.7 mmNot Rated220DIN 125Gray50000000000000
    M16
    		17.0 mm30.0 mm2.7 mm to 3.3 mmNot Rated220DIN 125Gray50000000000000
    M18
    		19.0 mm34.0 mm2.7 mm to 3.3 mmNot Rated220DIN 125Gray50000000000000
    M20
    		21.0 mm37.0 mm2.7 mm to 3.3 mmNot Rated220DIN 125Gray500000000000000
     
    back to top