Profile Profile |
|---|
 |  |
| U | Half Round |
 | |
| J |
Hardness Rating Hardness Rating |
|---|
|
Specifications Met Specifications Met |
|---|
|
About Durometer Hardness Scales
More
Slippery Plastic Trim
With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant. All of this trim has a hard rating to withstand high levels of impact. It's also nonmarking.
Rigid trim does not bend and is for use on straights. Push-on trim fits onto an edge and it grips on three sides for a tight hold. Made of MDS-filled nylon, it’s also resistant to oils and has good abrasion and wear resistance.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
MDS-Filled Nylon Plastic | ||||||||||||
| 1/16" | 7/32" | 11/64" | 9/32" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 00000 | |
| 1/8" | 1/4" | 1/4" | 5/16" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 0000 | |
| 17/64" | 19/64" | 27/64" | 3/8" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 0000 | |
| Each | ||||||||||||
100-ft. Lengths | ||||||||||||
MDS-Filled Nylon Plastic | ||||||||||||
| 1/16" | 7/32" | 11/64" | 9/32" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
| 1/8" | 1/4" | 1/4" | 5/16" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
| 17/64" | 19/64" | 27/64" | 3/8" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
Inside | Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
MDS-Filled Nylon Plastic | ||||||||||||
| 3/16" | 7/32" | 5/16" | 3/8" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 00000 | |
| Each | ||||||||||||
100-ft. Lengths | ||||||||||||
MDS-Filled Nylon Plastic | ||||||||||||
| 3/16" | 7/32" | 5/16" | 3/8" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
Inside | Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
MDS-Filled Nylon Plastic | ||||||||||||
| 7/64" | 17/64" | 15/64" | 21/64" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 00000 | |
| 1/8" | 7/16" | 1/4" | 1/2" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 0000 | |
| 13/64" | 15/16" | 21/64" | 1" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 0000 | |
| 1/4" | 7/16" | 23/64" | 1/2" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 0000 | |
| Each | ||||||||||||
100-ft. Lengths | ||||||||||||
MDS-Filled Nylon Plastic | ||||||||||||
| 7/64" | 17/64" | 15/64" | 21/64" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
| 1/8" | 7/16" | 1/4" | 1/2" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
| 13/64" | 15/16" | 21/64" | 1" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
| 1/4" | 7/16" | 23/64" | 1/2" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
Inside | Outside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | ID (G) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | Per Ft. | |
Short Lengths | |||||||||||||
MDS-Filled Nylon Plastic | |||||||||||||
| 1/8" | 15/32" | 21/64" | 41/64" | 15/64" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 00000 | |
| Each | |||||||||||||
100-ft. Lengths | |||||||||||||
MDS-Filled Nylon Plastic | |||||||||||||
| 1/8" | 15/32" | 21/64" | 41/64" | 15/64" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
Inside | Outside | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Short Leg Outside Ht. (F) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Available Lengths, ft. | Per Ft. | |
Short Lengths | |||||||||||||
MDS-Filled Nylon Plastic | |||||||||||||
| 3/16" | 3/8" | 5/16" | 1" | 7/16" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 0000000 | 00000 | |
| Each | |||||||||||||
| 5/16" | 3/8" | 7/16" | 1" | 7/16" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 6 | 0000000 | 00000 |
100-ft. Lengths | |||||||||||||
MDS-Filled Nylon Plastic | |||||||||||||
| 3/16" | 3/8" | 5/16" | 1" | 7/16" | Rigid | Hard | -40° to 220° | No | Yes | Gray | 100 | 00000000 | 000000 |
Plastic Trim
Flexible trim can be bent along a gradual curve. Trim with a hard or medium-hard rating withstand high levels of impact. The harder the bumper, the more impact it withstands.
Push-on trim fits onto an edge and it grips on three sides for a tight hold. Style 6 adheres to MS-21266 military dimensional standards.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Hardness Rating | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Length, ft. | Pkg. Qty. | Pkg. | |
Nylon Plastic | ||||||||||||||
| 6 | 1/16" | 3/32" | 5/32" | 5/32" | Flexible | Hard | -40° to 180° | No | Yes | Off-White | 1 | 25 | 0000000 | 00000 |
| 6 | 3/32" | 3/32" | 11/64" | 5/32" | Flexible | Hard | -40° to 180° | No | Yes | Off-White | 1 | 25 | 0000000 | 0000 |
| 6 | 3/16" | 5/32" | 23/64" | 15/64" | Flexible | Hard | -40° to 180° | No | Yes | Off-White | 1 | 25 | 0000000 | 00000 |
Food Industry Plastic Trim
This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications. This trim has a hard rating to withstand high levels of impact. It's also nonmarking.
Rigid trim does not bend and is for use on straights. Push-on trim fits onto an edge and it grips on three sides for a tight hold.
For technical drawings and 3-D models, click on a part number.
Inside | Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
Nylon Plastic—Hard | ||||||||||||
| 1/16" | 7/32" | 11/64" | 9/32" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 0000000 | 00000 | |
| 1/8" | 1/4" | 1/4" | 5/16" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 0000000 | 0000 | |
| 17/64" | 19/64" | 27/64" | 3/8" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 0000000 | 0000 | |
| Each | ||||||||||||
100-ft. Length | ||||||||||||
Nylon Plastic—Hard | ||||||||||||
| 1/16" | 7/32" | 11/64" | 9/32" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 100 | 00000000 | 000000 |
| 1/8" | 1/4" | 1/4" | 5/16" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 100 | 00000000 | 000000 |
| 17/64" | 19/64" | 27/64" | 3/8" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 100 | 00000000 | 000000 |
Inside | Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. (A) | Ht. (B) | Wd. (C) | Ht. (D) | Flexibility | Temperature Range, °F | For Use Outdoors | Nonmarking | Color | Specifications Met | Available Lengths, ft. | Per Ft. | |
Short Lengths | ||||||||||||
Nylon Plastic—Hard | ||||||||||||
| 1/8" | 17/64" | 15/64" | 21/64" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 0000000 | 00000 | |
| 1/8" | 7/16" | 1/4" | 1/2" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 0000000 | 0000 | |
| 1/4" | 29/64" | 3/8" | 1/2" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 0000000 | 0000 | |
| Each | ||||||||||||
100-ft. Length | ||||||||||||
Nylon Plastic—Hard | ||||||||||||
| 1/8" | 17/64" | 15/64" | 21/64" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 100 | 00000000 | 000000 |
| 1/8" | 7/16" | 1/4" | 1/2" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 100 | 00000000 | 000000 |
| 1/4" | 29/64" | 3/8" | 1/2" | Rigid | -40° to 200° | No | Yes | Off-White | FDA Compliant 21 CFR 177.1500 | 100 | 00000000 | 000000 |