Plastic clamping surfaces prevent damage to material.

The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Pull the handle to lock or release the clamping arm.

Grip all four corners of a rectangular workpiece.

Choose from flat and grooved liners.

Installing these clamps is a snap—push their interlocking teeth together with your fingers, then squeeze tight with pliers. To remove, use pliers to push sideways and separate the teeth.

Use these clamps with quick-clamp fittings for dairy to quickly connect and disconnect your line as needed.

Slip these joints over your pipe ends and tighten the band clamps for a secure hold.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Mount to a surface to secure and route cable.

The buckle allows you to cinch these ties tight.

These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.

Able to fit small bundles, these thin ties are more flexible than other ties.

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Create a cable tie with a buckle—no sewing required.

Stick these ties to any smooth, clean surface.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

Also known as lashing straps, use these to tightly secure material.

Attach these cable ties directly to a surface—no separate mount needed.

Suitable for use in washdown applications, these plastic collars also offer good chemical resistance.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Made for use in food processing facilities, these plastic knobs have a metal additive that sets off metal detectors if a piece breaks off into your line.

Identify equipment controls and components at a glance by their color. Long shafts can thread through these knobs for mounting versatility. Use the knobs as a grip to position, tighten, and hold fixtures, equipment, and machinery.

Identify equipment controls and components at a glance by their color. Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

Lock Ethernet cords in place to prevent unauthorized removal from ports.

Use these accessories to mount carriers to your machinery without creating an obstruction.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.

These two-leg slings stack steel drums vertically and horizontally.

A thin head allows these thumb screws to be used in low-clearance applications.

Stronger than standard nylon, these thumb screws are chemical resistant, nonconductive, and lightweight. They have a raised head that makes them easy to grip.

Designed with a flange to keep the plunger from being pushed through a hole when the ball is depressed.

Store tools such as brooms, cordless drills, screwdrivers, and flashlights.