Material Material |
---|
|
Finish Finish |
---|
|
Thread Size Thread Size |
---|
Eye Style Eye Style |
---|
![]() | Closed |
Shank Length Shank Length |
---|

|
|
|
Body Style Body Style |
---|
![]() | ![]() |
With Shoulder | Without Shoulder |
Eye Diameter Eye Diameter |
---|

|
|
|
Length Length |
---|
Movement Movement |
---|
![]() | Rigid |
Threading Threading |
---|
![]() | ![]() |
Fully Threaded | Partially Threaded |
Thread Length Thread Length |
---|
|
|
|
Application Application |
---|
|
Load Securement Type Load Securement Type |
---|
![]() | ![]() |
Anchor Point | Track System |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Eye Shape Eye Shape |
---|
|
For OD For OD |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Rod Ends

More
Nylon-Coated Eyebolts—For Lifting


Route wire and cable through the smooth eye without snagging.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | Without Shoulder | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Temperature Range, °F | Overall Lg. | Each | Overall Lg. | Each | ||
Nylon-Coated Steel | |||||||||||
1/4"-20 | 1" | 1" | 3/4" | 500 | 30° to 275° | 2 3/8" | 0000000 | 00000 | 2 1/4" | 0000000 | 00000 |
5/16"-18 | 1 1/8" | 1 1/8" | 7/8" | 900 | 30° to 275° | 2 3/4" | 0000000 | 0000 | 2 5/8" | 0000000 | 0000 |
3/8"-16 | 1 1/4" | 1 1/4" | 1" | 1,400 | 30° to 275° | 3 1/4" | 0000000 | 0000 | 2 7/8" | 0000000 | 0000 |
7/16"-14 | 1 3/8" | 1 3/8" | 1 1/16" | 2,000 | 30° to 275° | 3 5/8" | 0000000 | 00000 | __ | 000000 | 00 |
1/2"-13 | 1 1/2" | 1 1/2" | 1 3/16" | 2,600 | 30° to 275° | 4" | 0000000 | 00000 | 3 1/2" | 0000000 | 00000 |
9/16"-12 | 1 5/8" | 1 5/8" | 1 1/4" | 3,200 | 30° to 275° | 4 1/2" | 0000000 | 00000 | __ | 000000 | 00 |
5/8"-11 | 1 3/4" | 1 3/4" | 1 3/8" | 4,000 | 30° to 275° | 4 7/8" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
3/4"-10 | 2" | 2" | 1 1/2" | 6,000 | 30° to 275° | 5 1/4" | 0000000 | 00000 | 4 3/4" | 0000000 | 00000 |
7/8"-9 | 2 1/4" | 2 1/4" | 1 11/16" | 7,000 | 30° to 275° | 6" | 0000000 | 00000 | __ | 000000 | 00 |
1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,000 | 30° to 275° | 7" | 0000000 | 00000 | __ | 000000 | 00 |
Thread | With Shoulder | ||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Shank Lg., mm | Eye Dia., mm | Vertical Capacity, lbs. | Temperature Range, °F | Overall Lg., mm | Each | |
Nylon-Coated Steel | |||||||||
M6 | 1 | 12 | 12 | 19 | 450 | 30° to 275° | 47 | 0000000 | 000000 |
M8 | 1.25 | 12 | 12 | 25 | 450 | 30° to 275° | 61 | 0000000 | 00000 |
M10 | 1.5 | 20 | 20 | 28 | 1,625 | 30° to 275° | 75 | 0000000 | 00000 |
M12 | 1.75 | 24 | 24 | 30 | 2,250 | 30° to 275° | 85 | 0000000 | 00000 |
M12 | 1.75 | 76 | 76 | 30 | 2,250 | 30° to 275° | 137 | 0000000 | 00000 |
M14 | 2 | 28 | 28 | 35 | 3,500 | 30° to 275° | 103 | 0000000 | 00000 |
M16 | 2 | 32 | 32 | 35 | 3,500 | 30° to 275° | 106 | 0000000 | 00000 |
M18 | 2.5 | 36 | 36 | 38 | 4,700 | 30° to 275° | 117 | 0000000 | 00000 |
M20 | 2.5 | 40 | 40 | 43 | 6,275 | 30° to 275° | 135 | 0000000 | 00000 |
M24 | 3 | 48 | 48 | 46 | 8,450 | 30° to 275° | 153 | 0000000 | 00000 |
M30 | 3.5 | 60 | 60 | 55 | 14,075 | 30° to 275° | 194 | 0000000 | 00000 |
Routing Eyebolts with Nuts—Not for Lifting

Also known as nut eyebolts, these are designed for through-hole applications. Use them for routing wire and for other light duty applications.
Nylon plastic eyebolts won't conduct heat and electricity, preventing damage to your wire and cable. They are lightweight and corrosion-resistant.
Closed eyes are stronger than bent-closed eyes.
For technical drawings and 3-D models, click on a part number.
Thread | Nuts | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | Temp. Range, ° F | No. Included | Style | Pkg. Qty. | Pkg. | |
Closed Eye | ||||||||||
6-32 | 5/8" | 3/4" | 1 1/4" | 1/4" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
8-32 | 1" | 1 1/8" | 1 5/8" | 1/4" | -40° to 185° | 1 | Hex | 25 | 0000000 | 0000 |
10-24 | 7/8" | 1" | 1 3/4" | 3/8" | -40° to 185° | 1 | Hex | 25 | 0000000 | 0000 |
1/4"-20 | 7/8" | 1" | 2" | 1/2" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
1/4"-20 | 1 1/4" | 1 1/2" | 2 1/2" | 1/2" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
1/4"-20 | 1 1/4" | 2" | 3" | 1/2" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
5/16"-18 | 7/8" | 1" | 2 1/4" | 5/8" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
5/16"-18 | 1 1/4" | 2" | 3 1/4" | 5/8" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
3/8"-16 | 7/8" | 1" | 2 1/2" | 3/4" | -40° to 185° | 1 | Hex | 25 | 0000000 | 00000 |
3/8"-16 | 1 1/4" | 2" | 3 1/2" | 3/4" | -40° to 185° | 1 | Hex | 10 | 0000000 | 0000 |
3/8"-16 | 1 1/2" | 2 1/2" | 4" | 3/4" | -40° to 185° | 1 | Hex | 10 | 0000000 | 0000 |
3/8"-16 | 2 1/2" | 4" | 5 1/2" | 3/4" | -40° to 185° | 1 | Hex | 10 | 0000000 | 00000 |
Internally Threaded Chemical-Resistant Ball Joint Rod Ends


Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Choose a Shank Thread Direction | Each | |
10-32 | 3/16" | 25° | 5/8" | 5/16" | 1 1/16" | 1/2" | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 00000 | |
1/4"-28 | 1/4" | 25° | 3/4" | 3/8" | 1 5/16" | 11/16" | 90 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
5/16"-24 | 5/16" | 25° | 7/8" | 7/16" | 1 3/8" | 11/16" | 110 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
3/8"-24 | 3/8" | 22° | 1" | 1/2" | 1 5/8" | 13/16" | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
7/16"-20 | 7/16" | 22° | 1 1/8" | 9/16" | 1 13/16" | 15/16" | 270 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 0000 |
1/2"-20 | 1/2" | 22° | 1 5/16" | 5/8" | 2 1/8" | 1 1/16" | 330 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 00000 | |
5/8"-18 | 5/8" | 22° | 1 1/2" | 3/4" | 2 1/2" | 1 3/8" | 380 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
3/4"-16 | 3/4" | 22° | 1 3/4" | 7/8" | 2 7/8" | 1 9/16" | 510 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M4 × 0.7 mm | 5mm | 15° | 18mm | 6mm | 27mm | 10mm | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M5 × 0.8 mm | 5mm | 15° | 18mm | 6mm | 27mm | 10mm | 65 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M6 × 1 mm | 6mm | 14.5° | 20mm | 7mm | 30mm | 12mm | 90 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M8 × 1.25 mm | 8mm | 12.5° | 24mm | 9mm | 36mm | 16mm | 110 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M10 × 1.25 mm | 10mm | 12.5° | 30mm | 10mm | 43mm | 10mm | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M10 × 1.5 mm | 10mm | 12.5° | 30mm | 10mm | 43mm | 10mm | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M12 × 1.25 mm | 12mm | 12.5° | 34mm | 12mm | 50mm | 22mm | 270 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M16 × 1.5 mm | 16mm | 11.5° | 42mm | 15mm | 64mm | 28mm | 380 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M18 × 1.5 mm | 18mm | 11.5° | 46mm | 16mm | 71mm | 32mm | 510 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M20 × 2.5 mm | 20mm | 11.5° | 50mm | 18mm | 77mm | 33mm | 510 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
Chemical-Resistant Ball Joint Rod Ends


Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Choose a Shank Thread Direction | Each | |
10-32 | 3/16" | 25° | 5/8" | 5/16" | 1 1/4" | 3/4" | 15 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
1/4"-28 | 1/4" | 25° | 3/4" | 3/8" | 1 9/16" | 1" | 20 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
5/16"-24 | 5/16" | 25° | 7/8" | 7/16" | 1 7/8" | 1 1/4" | 30 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 0000 |
3/8"-24 | 3/8" | 22° | 1" | 1/2" | 1 15/16" | 1 1/4" | 75 | -20° to 175° | Nylon Plastic | ISO 12240-4 | 0000000 | 0000 | |
7/16"-20 | 7/16" | 22° | 1 1/8" | 9/16" | 2 1/8" | 1 3/8" | 85 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 0000 |
1/2"-20 | 1/2" | 22° | 1 5/16" | 5/8" | 2 7/16" | 1 1/2" | 100 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
5/8"-18 | 5/8" | 22° | 1 1/2" | 3/4" | 2 5/8" | 1 5/8" | 130 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
3/4"-16 | 3/4" | 22° | 1 3/4" | 7/8" | 2 7/8" | 1 3/4" | 220 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M5 × 0.8 mm | 5mm | 15° | 18mm | 8mm | 33mm | 19mm | 15 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M8 × 1.25 mm | 8mm | 12.5° | 24mm | 12mm | 42mm | 25mm | 40 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
M12 × 1.75 mm | 12mm | 12.5° | 34mm | 16mm | 54mm | 32mm | 85 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 00000 |
Rope Guides
Use these guides to position a rope.
Nylon guides are lightweight as well as chemical and oil resistant. For better abrasion resistance, choose those with an 18-8 or 316 stainless steel liner.
Warning: Never use for lifting applications.

Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Rope Dia. | Capacity | Lg. | Inner Ht. | Overall Ht. | Thick. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | Color | For Mounting Screw Size | Each | |
For 1 Line | |||||||||||||
9/32" | Not Rated | 1 1/16" | 5/16" | 5/8" | 13/32" | No | 2 | 5/32" | 19/32" | Black | 5/32" | 00000000 | 00000 |
3/8" | Not Rated | 1 3/8" | 3/8" | 3/4" | 7/16" | No | 2 | 3/16" | 7/8" | Black | No. 8 | 0000000 | 0000 |
1/2" | Not Rated | 1 7/8" | 3/8" | 9/16" | 3/16" | No | 2 | 3/16" | 1 3/8" | Black | No. 8 | 0000000 | 000 |
1/2" | Not Rated | 1 7/8" | 3/8" | 9/16" | 3/16" | No | 2 | 3/16" | 1 3/8" | White | No. 8 | 0000000 | 000 |
5/8" | Not Rated | 1 7/8" | 5/8" | 1 1/4" | 13/16" | No | 2 | 3/16" | 1 3/8" | Black | No. 12 | 0000000 | 0000 |


Clamp-On Rope Guides

Clamp around a tube or pipe to guide a rope.
Warning: Never use for lifting applications.
For OD | For Max. Rope Dia. | Lg. | Overall Ht. | Thick. | Color | Each | |
316 Stainless Steel and Nylon Plastic | |||||||
---|---|---|---|---|---|---|---|
7/8"-1" | 11/16" | 2 13/16" | 1 5/8" | 7/16" | Black | 0000000 | 000000 |
Webbing Guides
Use these guides to prevent webbing from twisting, or use as anchor points in tie-down applications. They are also known as footman's loops.
Nylon plastic guides are chemical and oil resistant, nonconductive, and lightweight.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Press-In Rope Cleats

Press rope into the gripping body of these cleats for a quick, temporary hold.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Cargo Nets for Snap-In Load-Securing Track


Contain and organize bulky and oddly shaped loads with this net. Each corner has a tightening buckle and a track fitting that snaps into track to keep cargo from shifting inside vans, trucks, and trailers.
Warning: Never use for lifting applications.
Max. | Opening | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Material | Color | Lg. | Wd. | End Fitting Material | No. of Mounting Points | Includes | Each | |
84 " | 48" | Nylon Plastic | Black | 1" | 1" | Zinc-Plated Steel | 4 | Plastic Storage Bag | 00000000 | 0000000 |