These screws have good chemical resistance. A thread locker bonded to the threads prevents loosening from vibration.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

Nonconductive and softer than brass, the nylon tip reduces vibration and eliminates damage from metal touching metal.

Made from nylon, these metric pan head screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Made from nylon, these metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Nylon screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Plastic screws are ?chemical and oil resistant, nonconductive, and lightweight.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. A nylon patch bonded to the threads adds friction to prevent loosening from vibration.

A nylon patch bonded to the threads adds friction to prevent loosening from vibration. Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic.

A nylon patch bonded to the threads adds friction to resist loosening from vibration.

Made from Grade 8 steel, these screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are more than twice as strong as our stainless steel thread-locking screws. The thread locker helps resist loosening from vibration.

Made from 18-8 stainless steel, these screws have good chemical resistance. They have a thread locker to prevent loosening from vibration.

These metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Stainless steel screws have excellent corrosion resistance in most environments.

A nylon patch bonded to the threads adds friction to prevent loosening from vibration. Made of 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic.

A locking element on the threads adds friction to resist loosening. Comparable to Grade 8 steel, these alloy steel shoulder screws are the strongest we offer.

These shoulder screws have good chemical resistance.

Install and remove these metric shoulder screws by hand or with a hex key.

Made from alloy steel, these metric set screws have a thin edge that digs into hard surfaces for a secure hold. They have a nylon locking patch that grips threads to resist loosening.

These 18-8 stainless steel set screws are chemical resistant. They have a nylon locking patch that grips threads to resist loosening.

These nylon set screws are chemical resistant, lightweight, and nonconductive. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Often used to secure gears and pulleys to shafts, these metric nylon set screws are lightweight and won’t carry an electrical current.

A nylon locking patch grips threads to resist loosening.

These slotted thumb screws have a thin, knurled head for use in low-clearance applications. Made of 18-8 stainless steel, they are chemical resistant.

A thin, knurled head allows these thumb screws to be used in low-clearance applications. They have a black-oxide finish to resist corrosion in dry environments.

Brass thumb screws are corrosion resistant in wet environments and electrically conductive.

Brass thumb screws are corrosion resistant in wet environments and electrically conductive.

Made from 18-8 stainless steel, these thumb screws are chemical resistant. They have a raised head that makes them easy to grip.

A raised head makes these thumb screws easy to grip. They have a black-oxide finish to resist corrosion in dry environments.

Brass thumb screws are corrosion resistant in wet environments and electrically conductive.

These slotted thumb screws are slim to fit in tight spaces.

Stainless steel thumb screws have excellent corrosion resistance in most environments.

These metric thumb screws have a knurled head for a slip-resistant controlled adjustment.

A large head allows you to grip these screws with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Tighten these thumb screws by hand or with a hex key for more torque.

Fasten material by hand, so tools don’t scratch or contaminate parts you frequently adjust in food-processing or pharmaceutical plants.

A flange provides a bearing surface to hold parts under the head.

Made from 18-8 stainless steel, these thumb screws are chemical resistant. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

Arms provide a flat surface to push your fingers against.

A wide tip provides more gripping power than standard swivel-tip thumb screws. To use, remove the tip, thread the screw through the hole, and attach the tip on the other side.

A large swivel angle allows these thumb screws to make better contact with angled and uneven surfaces than nonremovable swivel-tip thumb screws.

Wings provide more leverage than spade-head thumb screws for greater torque while tightening. A zinc plating provides corrosion resistance in wet environments.

Stronger than standard nylon, these thumb screws are chemical resistant, nonconductive, and lightweight. They have a raised head that makes them easy to grip.

A thin head allows these thumb screws to be used in low-clearance applications.

These steel thumb screws have a black-oxide finish to resist corrosion in dry environments.

Install in soft material such as aluminum and low-carbon steel at least 0.036" thick with an arbor press or similar pressure tool.

The base flares out during installation, creating a backside flange in hard materials and near edges in panels up to 0.312" thick. Install with a flare-in installation tool and an arbor press.

Press these wing head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.

These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.

These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.

These anchors are also known as drive rivets. To install, hammer the pin into the body. Pry out the pin to remove.

Also known as tap-in or uni-tap rivets, these anchors are barbed to resist pull out. Made from nylon, they're chemical resistant.

Fins prevent these anchors from spinning during installation.

Install with a hex key for more torque than slotted ball-nose spring plungers.

Install with a driver.

Fasten from the nose end with a wrench for more torque than slotted long-nose spring plungers.

Lock the nose into the retracted position by pulling the knob and rotating it 90°.

Lock the nose into the retracted position by pulling the ring and rotating it 90°.

Thread onto machinery or attach a knob or handle to the threaded spindle.

Identify equipment controls and components at a glance by their color. Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Made for use in food processing facilities, these plastic knobs have a metal additive that sets off metal detectors if a piece breaks off into your line.

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.