With flat edges on all four sides, square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections. They’re made of Buna-N, which is resilient and offers excellent tear resistance. They resist hydraulic oils and motor oil.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life. These O-rings are made of Buna-N, which is resilient and tear resistant. They resist motor oil. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Choose these O-rings for their adherence to strict military standards for material and construction. Made of Buna-N, they are resilient and offer resistance to tearing, motor oil, ammonia, ethylene glycol, isopropyl alcohol, and mineral oil. These O-rings have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

More abrasion resistant than Buna-N O-rings, these polyurethane O-rings resist mineral oil, motor oil, and ethylene glycol. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These Viton® fluoroelastomer O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. They have a round profile and are suitable for both static and dynamic sealing applications.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These hard O-rings offer better wear resistance than standard Viton® fluoroelastomer O-rings. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All have a round profile and are suitable for both static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life. Made of Viton® fluoroelastomer, these O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These durable Viton® fluoroelastomer O-rings bounce back to shape after repeated compression better than other types of Viton® fluoroelastomer O-rings. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. These O-rings have a round profile and are suitable for both static and dynamic sealing applications. They have shelf life, cure date, and traceable lot number printed on the bag.

Inch O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Because one black O-ring looks just like another, these Viton® fluoroelastomer O-rings are brown for easy identification. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All have a round profile and are suitable for both static and dynamic sealing applications. O-rings have shelf life, cure date, and traceable lot number printed on the bag.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Made of Viton® fluoroelastomer, these O-rings meet MIL-R-83248. They resist chemicals such as benzene, butyl alcohol, and ethylene glycol. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

If the FEP casing on these O-rings wears away, the Viton® fluoroelastomer core will continue to ward off chemicals. They are just as chemical resistant as PTFE O-rings, but the core is soft to make them more compressible. These O-rings resist acetone, solvents, methanol, and boric acid. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the silicone core is soft to make these O-rings more compressible. They resist acetone, solvents, methanol, and boric acid. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Rigid and hard with a slippery surface, these PTFE O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric acid. They have a round profile and are suitable for a wide range of static and dynamic sealing applications.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Inherently softer and more compressible than PTFE O-rings, these Kalrez 4079 O-rings have comparable chemical resistance. Use them with acetone, methyl ethyl ketone (MEK), potassium hydroxide, and most acids. They have a round profile and are suitable for a wide range of static and dynamic sealing applications.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These fluorosilicone O-rings remain flexible at temperatures as low as -80° F. They resist ethanol, ethylene glycol, and isopropyl alcohol. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

While these Aflas O-rings are commonly used with petroleum fluids, they also resist many chemicals, such as ammonia, calcium hydroxide, and acetic, boric, and phosphoric acids. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These silicone O-rings withstand temperatures up to 400° F or 450° F. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All have a cure date and a traceable lot number printed on the bag.

Inch O-rings have a dash number. USP VI Certified, they meet testing requirements for material quality.

For technical drawings and 3-D models, click on a part number.

Able to withstand temperatures up to 400° F, these silicone O-rings are softer than standard silicone O-rings for a better seal in low-pressure applications. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These EPDM O-rings resist water, steam, ethanol, and ethylene glycol. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

In addition to water, these neoprene O-rings resist ammonia, ethylene glycol, and isopropyl alcohol. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.