With flat edges on all four sides, square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections. They’re made of Buna-N, which is resilient and offers excellent tear resistance. They resist hydraulic oils and motor oil.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life. These O-rings are made of Buna-N, which is resilient and tear resistant. They resist motor oil. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These O-rings have eight points of contact for a better seal in dynamic applications than X-profile O-rings, plus they have eight grooves that hold lubricant to reduce friction and wear for a longer service life. They’re made of Buna-N, which is resilient and offers excellent tear resistance. These O-rings resist grease, hydraulic oils, and motor oil. They're sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Choose these O-rings for their adherence to strict military standards for material and construction. Made of Buna-N, they are resilient and offer resistance to tearing, motor oil, ammonia, ethylene glycol, isopropyl alcohol, and mineral oil. These O-rings have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

More abrasion resistant than Buna-N O-rings, these polyurethane O-rings resist mineral oil, motor oil, and ethylene glycol. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These Viton® fluoroelastomer O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. They have a round profile and are suitable for both static and dynamic sealing applications.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Softer than standard Viton® fluoroelastomer O-rings, these offer a better seal in low-pressure applications. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. These O-rings have a round profile and are suitable for both static and dynamic sealing applications. All are sized to the SAE standard AS568. They have shelf life, cure date, and traceable lot number printed on the bag.

For technical drawings and 3-D models, click on a part number.

These hard O-rings offer better wear resistance than standard Viton® fluoroelastomer O-rings. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All have a round profile and are suitable for both static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

With flat edges on all four sides, these Viton® fluoroelastomer square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Also known as Quattro Seals and X-rings, these X-profile O-rings have four points of contact for a better seal in dynamic applications than round-profile O-rings. They also require less compression to make a seal, so they offer a longer service life. Made of Viton® fluoroelastomer, these O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These durable Viton® fluoroelastomer O-rings bounce back to shape after repeated compression better than other types of Viton® fluoroelastomer O-rings. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. These O-rings have a round profile and are suitable for both static and dynamic sealing applications. They have shelf life, cure date, and traceable lot number printed on the bag.

Inch O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Because one black O-ring looks just like another, these Viton® fluoroelastomer O-rings are brown for easy identification. They resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. All have a round profile and are suitable for both static and dynamic sealing applications. O-rings have shelf life, cure date, and traceable lot number printed on the bag.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Made of Viton® fluoroelastomer, these O-rings meet MIL-R-83248. They resist chemicals such as benzene, butyl alcohol, and ethylene glycol. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

If the FEP casing on these O-rings wears away, the Viton® fluoroelastomer core will continue to ward off chemicals. They are just as chemical resistant as PTFE O-rings, but the core is soft to make them more compressible. These O-rings resist acetone, solvents, methanol, and boric acid. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the silicone core is soft to make these O-rings more compressible. They resist acetone, solvents, methanol, and boric acid. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Rigid and hard with a slippery surface, these PTFE O-rings resist harsh chemicals, such as acetone, fluorinated solvents, methanol, and boric acid. They have a round profile and are suitable for a wide range of static and dynamic sealing applications.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

While these Aflas O-rings are commonly used with petroleum fluids, they also resist many chemicals, such as ammonia, calcium hydroxide, and acetic, boric, and phosphoric acids. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These silicone O-rings withstand temperatures up to 400° F or 450° F. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All have a cure date and a traceable lot number printed on the bag.

Inch O-rings have a dash number. USP VI Certified, they meet testing requirements for material quality.

For technical drawings and 3-D models, click on a part number.

Able to withstand temperatures up to 400° F, these silicone O-rings are softer than standard silicone O-rings for a better seal in low-pressure applications. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

Made of silicone, these square-profile O-rings withstand temperatures up to 400° F. They have flat edges on all four sides, so they cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These EPDM O-rings resist water, steam, ethanol, and ethylene glycol. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

These O-rings withstand higher temperatures than standard EPDM O-rings. They resist water, steam, ethanol, and ethylene glycol. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings have shelf life, cure date, and traceable lot number printed on the bag.

Inch O-rings have a dash number and are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.

In addition to water, these neoprene O-rings resist ammonia, ethylene glycol, and isopropyl alcohol. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.

For technical drawings and 3-D models, click on a part number.