We will reply to your message within an hour.
More
Made of Buna-N, these O-rings resist grease, hydraulic oil, and motor oil—plus mild chemicals and water.
Softer than standard Buna-N O-rings for a better seal in low-pressure applications.
Also known as Boss O-rings, these hard O-rings are for use in tube fittings with a straight-thread connection.
With flat edges on all four sides, square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.
These O-rings have eight points of contact for a better seal in dynamic applications than X-profile O-rings, plus they have eight grooves that hold lubricant to reduce friction and wear for a longer service life.
These Buna-N O-rings are made and bagged in an ISO Class 7 (Fed. Std. 10,000) clean room.
If these O-rings deteriorate, they can be picked up by metal detection systems.
These Viton® fluoroelastomer O-rings resist a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol.
Softer than standard Viton® fluoroelastomer O-rings, these offer a better seal in low-pressure applications.
With flat edges on all four sides, these square-profile O-rings cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.
Because one black O-ring looks just like another, these O-rings are brown for easy identification.
All of these O-rings meet MIL-R-83248C.
These are the highest purity chemical-resistant O-rings we offer. They are made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room, plus they’re USP VI certified; not for use in medical applications.
Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection. They meet MIL-R-83248.
Unlike silicone, the Viton® fluoroelastomer core will continue to ward of chemicals should the FEP casing wear away.
The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.
Inherently softer and more compressible than PTFE O-rings, these Kalrez 4079 O-rings have comparable chemical resistance.
Able to bounce back after repeated compression, these Kalrez 7075 O-rings last longer than other Kalrez O-rings when exposed to repeated heating/cooling cycles.
Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.
Kalrez 6375 O-rings are preferred over Kalrez 4079 for chemical-processing environments and applications involving steam.
Also known as Boss O-rings, these Kalrez 4079 O-rings are for use in tube fittings with a straight-thread connection. They’re inherently softer and more compressible than PTFE O-rings with comparable chemical resistance.
While these Aflas O-rings are commonly used with petroleum fluids, they also resist many chemicals, such as ammonia, calcium hydroxide, and acetic, boric, and phosphoric acids.
These silicone O-rings withstand temperatures up to 400° F or 450° F.
Able to withstand temperatures up to 400° F, these O-rings are softer than standard silicone O-rings for a better seal in low-pressure applications.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements. These O-rings withstand temperatures up to 450° F.
These square-profile O-rings have flat edges on all four sides, so they cover more surface than round-profile O-rings for a better seal in static applications, such as hose, pipe, and faucet connections.
Made and bagged in an ISO Class 7 (Fed. Std. Class 10,000) clean room, these are the highest purity high-temperature O-rings we offer.
These O-rings withstand higher temperatures than standard EPDM O-rings.
When you need an O-ring that’s not an industry standard size, we can make one to fit your requirements.
Made of FDA-listed material for use with food and beverage.
These O-rings also resist ammonia, ethylene glycol, and isopropyl alcohol.
Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.
These O-rings are heat-treated, cleaned, and double-bagged in an ISO Class 5 (Fed. Std. Class 100) clean room for use in high-vacuum systems.
This cord stock is softer and creates a better seal in low-pressure applications than standard Buna-N cord stock.
Harder than standard Buna-N cord stock for better wear resistance.
This square-profile cord stock has flat edges on all four sides, which creates a better seal than round profile in static applications, such as hose, pipe, and faucet connections.
The X shape of this cord stock provides four points of contact for a better seal in dynamic applications than round profile. It also requires less compression to make a seal, so it offers a longer service life.
This cord stock resists benzene, boric acid, ethylene glycol, and isopropyl alcohol.
Harder than standard Viton® fluoroelastomer cord stock for better wear resistance.
This cord stock is softer and creates a better seal in low-pressure applications than standard fluoroelastomer cord stock.
The brown color of this cord stock makes it easy to identify.
This cord stock is made of FDA-listed material for use with food and beverage. It resists citric acid, diluted salt solutions, glycerin, and sodium bicarbonate.
More chemical resistant than standard Viton® fluoroelastomer, this cord stock is made of Grade ETP Viton® fluoroelastomer. It resists harsh chemicals, such as calcium hydroxide, methyl ethyl ketone (MEK), and nitric and phosphoric acids.
Use this cord stock to create O-rings for high-temperature applications up to 400° F.
This cord stock is softer and creates a better seal than standard silicone cord stock in low-pressure applications up to 400° F.
Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.
In addition to water and steam, this EPDM cord stock resists diluted salt solutions, ethanol, and isopropyl alcohol.
Use neoprene cord stock to make O-rings for applications that come into contact with water.
These O-rings are harder than standard Buna-N O-rings for better resistance to wear.
These U-cup seals create less friction than O-ring-loaded U-cups, so they wear more slowly. Also known as lip seals, U-cups have a sealing lip on both the inside and outside edges, so they can be used for rod and piston sealing.
In addition to providing excellent sealing performance at low pressure, these seals withstand a wider range of temperatures and chemicals than U-cup seals. They’re also known as spring-energized seals.
PTFE gives these seals a slippery surface that allows rod speeds more than two times faster than our other piston seals.
A square O-ring prevents these piston seals from rocking in the groove.
Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.
For use in air-powered cylinders, these seals prevent the piston from slamming against the cylinder body to minimize wear and noise.
Made from MDS-filled PTFE for a slippery surface, these wipers allow rods to move three times faster than other rod wipers.
Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.
Made from glass-filled nylon for excellent wear resistance and strength.
PTFE has excellent chemical resistance and withstands a wide temperature range of -110° F to 500° F.