Clear All
Cross Section Shape Cross Section Shape |
|---|
 | Round |
Dash Number Dash Number |
|---|
Maximum Temperature Maximum Temperature |
|---|
|
ID ID |
|---|
OD OD |
|---|
|
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
|
Hardness Rating Hardness Rating |
|---|
|
Hardness Hardness |
|---|
|
Specifications Met Specifications Met |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Fractional ID Fractional ID |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Fractional OD Fractional OD |
|---|
Environment Environment |
|---|
For Motion Type For Motion Type |
|---|
 | Reciprocating |
About O-Rings
More
Close
About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
Ultra-Chemical-Resistant Kalrez 4079 O-Rings
Inherently softer and more compressible than PTFE O-rings, these Kalrez 4079 O-rings have comparable chemical resistance. Use them with acetone, methyl ethyl ketone (MEK), potassium hydroxide, and most acids. They have a round profile and are suitable for a wide range of static and dynamic sealing applications.
Metric O-rings are sized to the actual measured inside diameter.
For technical drawings and 3-D models, click on a part number.
Metric
| ID, mm | OD, mm | Hardness | Temperature Range, °F | Color | Each | |
1.5 mm Wide | ||||||
|---|---|---|---|---|---|---|
| 2.5 | 5.5 | Durometer 75A | 30° to 600° | Black | 0000000 | 000000 |
| 3.5 | 6.5 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 7.5 | 10.5 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 9 | 12 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 12 | 15 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
1.6 mm Wide | ||||||
| 9.1 | 12.3 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
2 mm Wide | ||||||
| 4 | 8 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 6 | 10 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 12 | 16 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 13 | 17 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 14 | 18 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 16 | 20 | Durometer 75A | 30° to 600° | Black | 0000000 | 00000 |
| 18 | 22 | Durometer 75A | 30° to 600° | Black | 0000000 | 000000 |
| 20 | 24 | Durometer 75A | 30° to 600° | Black | 0000000 | 000000 |
| 22 | 26 | Durometer 75A | 30° to 600° | Black | 0000000 | 000000 |
| 26 | 30 | Durometer 75A | 30° to 600° | Black | 0000000 | 000000 |
2.5 mm Wide | ||||||
| 15 | 20 | Durometer 75A | 30° to 600° | Black | 0000000 | 000000 |
Ultra-Chemical-Resistant Super-Resilient Kalrez 7075 O-Rings
Able to bounce back after repeated compression, these Kalrez 7075 O-rings last longer than other Kalrez O-rings when exposed to repeated heating/cooling cycles. They resist acetone, methyl ethyl ketone (MEK), potassium hydroxide, and most acids. All have a round profile and are suitable for a wide range of static and dynamic sealing applications. These O-rings are sized to the SAE standard AS568.
For technical drawings and 3-D models, click on a part number.
Fractional | Actual | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dash Number | ID | OD | ID | OD | Hardness | Specifications Met | Temperature Range, °F | Color | Each | |
Wd.:1/16 Fractional (0.060" Actual) | ||||||||||
| 003 | 1/16 | 3/16 | 0.056" | 0.176" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
Wd.:1/16 Fractional (0.070" Actual) | ||||||||||
| 004 | 5/64 | 13/64 | 0.070" | 0.210" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 005 | 3/32 | 7/32 | 0.101" | 0.241" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 006 | 1/8 | 1/4 | 0.114" | 0.254" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 007 | 5/32 | 9/32 | 0.145" | 0.285" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 008 | 3/16 | 5/16 | 0.176" | 0.316" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 009 | 7/32 | 11/32 | 0.208" | 0.348" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 010 | 1/4 | 3/8 | 0.239" | 0.379" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 011 | 5/16 | 7/16 | 0.301" | 0.441" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 012 | 3/8 | 1/2 | 0.364" | 0.504" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 013 | 7/16 | 9/16 | 0.426" | 0.566" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 014 | 1/2 | 5/8 | 0.489" | 0.629" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 015 | 9/16 | 11/16 | 0.551" | 0.691" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 016 | 5/8 | 3/4 | 0.614" | 0.754" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 017 | 11/16 | 13/16 | 0.676" | 0.816" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 018 | 3/4 | 7/8 | 0.739" | 0.879" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 019 | 13/16 | 15/16 | 0.801" | 0.941" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 020 | 7/8 | 1 | 0.864" | 1.004" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 021 | 15/16 | 1 1/16 | 0.926" | 1.066" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 022 | 1 | 1 1/8 | 0.989" | 1.129" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 024 | 1 1/8 | 1 1/4 | 1.114" | 1.254" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 026 | 1 1/4 | 1 3/8 | 1.239" | 1.379" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 028 | 1 3/8 | 1 1/2 | 1.364" | 1.504" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 029 | 1 1/2 | 1 5/8 | 1.489" | 1.629" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 030 | 1 5/8 | 1 3/4 | 1.614" | 1.754" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 031 | 1 3/4 | 1 7/8 | 1.739" | 1.879" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
Wd.:3/32 Fractional (0.103" Actual) | ||||||||||
| 108 | 1/4 | 7/16 | 0.237" | 0.443" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 109 | 5/16 | 1/2 | 0.299" | 0.505" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 110 | 3/8 | 9/16 | 0.362" | 0.568" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 111 | 7/16 | 5/8 | 0.424" | 0.630" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 112 | 1/2 | 11/16 | 0.487" | 0.693" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 113 | 9/16 | 3/4 | 0.549" | 0.755" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 114 | 5/8 | 13/16 | 0.612" | 0.818" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 115 | 11/16 | 7/8 | 0.674" | 0.880" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 116 | 3/4 | 15/16 | 0.737" | 0.943" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 117 | 13/16 | 1 | 0.799" | 1.005" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 00000 |
| 118 | 7/8 | 1 1/16 | 0.862" | 1.068" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
Wd.:1/8 Fractional (0.139" Actual) | ||||||||||
| 206 | 1/2 | 3/4 | 0.484" | 0.762" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 208 | 5/8 | 7/8 | 0.609" | 0.887" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 210 | 3/4 | 1 | 0.734" | 1.012" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 211 | 13/16 | 1 1/16 | 0.796" | 1.074" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 212 | 7/8 | 1 1/8 | 0.859" | 1.137" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 214 | 1 | 1 1/4 | 0.984" | 1.262" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 216 | 1 1/8 | 1 3/8 | 1.109" | 1.387" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
| 218 | 1 1/4 | 1 1/2 | 1.234" | 1.512" | Durometer 75A (Medium) | ASTM D2000, SAE AS568, SAE J200 | 30° to 620° | Black | 0000000 | 000000 |
Ultra-Chemical-Resistant High-Purity Kalrez 6230 O-Rings
Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors. They're made of FDA-listed material for use with food and beverage, plus they are 3-A and USP VI certified; not for use in medical applications. These O-rings resist ammonia, glycerin, sodium bicarbonate, solvents, synthetic lubricants, and most acids. They have a round profile and are suitable for a wide range of static and dynamic sealing applications. All are sized to the SAE standard AS568.
For technical drawings and 3-D models, click on a part number.
Fractional | Actual | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dash Number | Wd. | ID | OD | ID | OD | Hardness | Specifications Met | Temperature Range, °F | Color | Each | |
Wd.: 1/32 Fractional (0.040" Actual) | |||||||||||
| 001 | 1/32 | 1/32 | 3/32 | 0.029" | 0.109" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
Wd.: 3/64 Fractional (0.050" Actual) | |||||||||||
| 002 | 3/64 | 3/64 | 9/64 | 0.042" | 0.142" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
Wd.: 1/16 Fractional (0.060" Actual) | |||||||||||
| 003 | 1/16 | 1/16 | 3/16 | 0.056" | 0.176" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
Wd.: 1/16 Fractional (0.070" Actual) | |||||||||||
| 004 | 1/16 | 5/64 | 13/64 | 0.070" | 0.210" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 005 | 1/16 | 3/32 | 7/32 | 0.101" | 0.241" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 006 | 1/16 | 1/8 | 1/4 | 0.114" | 0.254" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 007 | 1/16 | 5/32 | 9/32 | 0.145" | 0.285" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 008 | 1/16 | 3/16 | 5/16 | 0.176" | 0.316" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 009 | 1/16 | 7/32 | 11/32 | 0.208" | 0.348" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 010 | 1/16 | 1/4 | 3/8 | 0.239" | 0.379" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 011 | 1/16 | 5/16 | 7/16 | 0.301" | 0.441" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 012 | 1/16 | 3/8 | 1/2 | 0.364" | 0.504" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 013 | 1/16 | 7/16 | 9/16 | 0.426" | 0.566" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 014 | 1/16 | 1/2 | 5/8 | 0.489" | 0.629" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 015 | 1/16 | 9/16 | 11/16 | 0.551" | 0.691" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 016 | 1/16 | 5/8 | 3/4 | 0.614" | 0.754" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 017 | 1/16 | 11/16 | 13/16 | 0.676" | 0.816" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 018 | 1/16 | 3/4 | 7/8 | 0.739" | 0.879" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 019 | 1/16 | 13/16 | 15/16 | 0.801" | 0.941" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 020 | 1/16 | 7/8 | 1 | 0.864" | 1.004" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 021 | 1/16 | 15/16 | 1 1/16 | 0.926" | 1.066" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
Wd.: 3/32 Fractional (0.103" Actual) | |||||||||||
| 104 | 3/32 | 1/8 | 5/16 | 0.112" | 0.318" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 108 | 3/32 | 1/4 | 7/16 | 0.237" | 0.443" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 109 | 3/32 | 5/16 | 1/2 | 0.299" | 0.505" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 110 | 3/32 | 3/8 | 9/16 | 0.362" | 0.568" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 111 | 3/32 | 7/16 | 5/8 | 0.424" | 0.630" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 112 | 3/32 | 1/2 | 11/16 | 0.487" | 0.693" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 113 | 3/32 | 9/16 | 3/4 | 0.549" | 0.755" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 114 | 3/32 | 5/8 | 13/16 | 0.612" | 0.818" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 115 | 3/32 | 11/16 | 7/8 | 0.674" | 0.880" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 116 | 3/32 | 3/4 | 15/16 | 0.737" | 0.943" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 117 | 3/32 | 13/16 | 1 | 0.799" | 1.005" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 00000 |
| 119 | 3/32 | 15/16 | 1 1/8 | 0.924" | 1.130" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 120 | 3/32 | 1 | 1 3/16 | 0.987" | 1.193" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 122 | 3/32 | 1 1/8 | 1 5/16 | 1.112" | 1.318" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 123 | 3/32 | 1 3/16 | 1 3/8 | 1.174" | 1.380" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 125 | 3/32 | 1 5/16 | 1 1/2 | 1.299" | 1.505" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
Wd.: 1/8 Fractional (0.139" Actual) | |||||||||||
| 207 | 1/8 | 9/16 | 13/16 | 0.546" | 0.824" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 210 | 1/8 | 3/4 | 1 | 0.734" | 1.012" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 212 | 1/8 | 7/8 | 1 1/8 | 0.859" | 1.137" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
| 216 | 1/8 | 1 1/8 | 1 3/8 | 1.109" | 1.387" | Durometer 75A (Medium) | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600, SAE AS568, USP VI Certified | 30° to 500° | Black | 0000000 | 000000 |
High-Speed Wear Rings
Profile
Piston Installation
Rod Installation
Made from PTFE, these wear rings have a slippery surface that allows rods to move at least three times faster than nylon wear rings.
Gap size is the maximum distance between the split ends of the ring while it is in use. Rings are closed when not in use.
For technical drawings and 3-D models, click on a part number.
For Rod Sealing | For Piston Sealing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | For Groove Dia. | For Bore Dia. | For Groove Dia. | Gap Size | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Specifications Met | Each | |
Bronze-Filled PTFE Plastic | |||||||||||
For 1/4" Groove Wd. | |||||||||||
| 1 3/4" | 2.000" | 2" | 1.750" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 000000 |
| 1 7/8" | 2.125" | 2 1/8" | 1.875" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2" | 2.250" | 2 1/4" | 2.000" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 1/8" | 2.375" | 2 3/8" | 2.125" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 1/4" | 2.500" | 2 1/2" | 2.250" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 1/2" | 2.750" | 2 3/4" | 2.500" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 3/4" | 3.000" | 3" | 2.750" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 3" | 3.250" | 3 1/4" | 3.000" | 0.175" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 3 1/4" | 3.500" | 3 1/2" | 3.250" | 0.175" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 3 3/4" | 4.000" | 4" | 3.750" | 0.175" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
For 3/8" Groove Wd. | |||||||||||
| 1 3/4" | 2.000" | 2" | 1.750" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 1 7/8" | 2.125" | 2 1/8" | 1.875" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2" | 2.250" | 2 1/4" | 2.000" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 1/8" | 2.375" | 2 3/8" | 2.125" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 1/4" | 2.500" | 2 1/2" | 2.250" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 1/2" | 2.750" | 2 3/4" | 2.500" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 2 3/4" | 3.000" | 3" | 2.750" | 0.140" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 3" | 3.250" | 3 1/4" | 3.000" | 0.175" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 3 1/4" | 3.500" | 3 1/2" | 3.250" | 0.175" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |
| 3 3/4" | 4.000" | 4" | 3.750" | 0.175" | 13 | -200° to 575° | Durometer 65D (Extra Hard) | Brown | ASTM D4745, SAE AMS3678 | 0000000 | 00000 |