Clear All
For Bore Diameter For Bore Diameter |
|---|
|
|
|
For Rod Diameter For Rod Diameter |
|---|
|
|
|
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Seal OD Seal OD |
|---|
|
|
|
For Cord OD Range For Cord OD Range |
|---|
|
For Groove Diameter For Groove Diameter |
|---|
|
|
|
For Motion Type For Motion Type |
|---|
 | Reciprocating |
Seal ID Seal ID |
|---|
|
|
|
For Minimum Cord OD For Minimum Cord OD |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
For Use With For Use With |
|---|
For Cylinder Type For Cylinder Type |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Close
About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
Wear Rings
Profile
Piston Installation
Rod Installation
Made from glass-filled nylon for excellent wear resistance and strength.
Gap size is the maximum distance between the split ends of the ring while it is in use. Rings are closed when not in use.
For technical drawings and 3-D models, click on a part number.
For Rod Sealing | For Piston Sealing | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | For Groove Dia. | For Bore Dia. | For Groove Dia. | Gap Size | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Each | |
Glass-Filled Nylon Plastic | ||||||||||
For 0.26" Groove Wd. | ||||||||||
| 1/2" | 0.750" | 3/4" | 0.500" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 000000 |
| 3/4" | 1.000" | 1" | 0.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1" | 1.250" | 1 1/4" | 1.000" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/4" | 1.500" | 1 1/2" | 1.250" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 3/8" | 1.625" | 1 5/8" | 1.375" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/2" | 1.750" | 1 3/4" | 1.500" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 5/8" | 1.875" | 1 7/8" | 1.625" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 3/4" | 2.000" | 2" | 1.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 7/8" | 2.125" | 2 1/8" | 1.875" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2" | 2.250" | 2 1/4" | 2.000" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2 1/4" | 2.500" | 2 1/2" | 2.250" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2 1/2" | 2.750" | 2 3/4" | 2.500" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2 3/4" | 3.000" | 3" | 2.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 3" | 3.250" | 3 1/4" | 3.000" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 3 1/4" | 3.500" | 3 1/2" | 3.250" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 3 3/4" | 4.000" | 4" | 3.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
For 0.385" Groove Wd. | ||||||||||
| 1" | 1.250" | 1 1/4" | 1.000" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/4" | 1.500" | 1 1/2" | 1.250" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 1/2" | 1.750" | 1 3/4" | 1.500" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 1 3/4" | 2.000" | 2" | 1.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2" | 2.250" | 2 1/4" | 2.000" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2 1/4" | 2.500" | 2 1/2" | 2.250" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 2 3/4" | 3.000" | 3" | 2.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 3 1/4" | 3.500" | 3 1/2" | 3.250" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
| 3 3/4" | 4.000" | 4" | 3.750" | 0.093" | 3 | -40° to 275° | Rockwell R120 (Extra Hard) | Gray | 0000000 | 00000 |
Wraparound Multi-Cord Grips
Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors. Choose a housing and then select inserts (sold separately). Inserts have a slit, eliminating the need to thread cable through them.
For technical drawings and 3-D models, click on a part number.
Surface-Mount Housings
Surface-Mount Housing
Surface-Mount Housing Shown Open
2 Small Inserts and 1 Large insert
2 Small Inserts and 2 Large Inserts
4 Small Inserts and 1 Large Insert
4 Small Inserts (2.9" Lg.)
4 Small Inserts (4.7" Lg)
5 Small Inserts
6 Small Inserts and 1 Large Insert
6 Small Inserts
8 Small Inserts
10 Small inserts
1 Large Insert
2 Large Inserts
For Small Inserts | For Large Inserts | For Panel Cutout | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Inserts | Ht. | Wd. | Ht. | Wd. | Lg. | Wd. | Dp. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Black Nylon Plastic | ||||||||||||||||||
| 2 Small / 1 Large | 0.83" | 0.83" | 1.63" | 1.63" | 3.9" | 2.3" | 0.7" | 2.5" | 1.6" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 000000 |
| 2 Small / 2 Large | 0.83" | 0.83" | 1.63" | 1.63" | 5.8" | 2.3" | 0.7" | 4.4" | 1.6" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
| 4 Small / 1 Large | 0.83" | 0.83" | 1.63" | 1.63" | 4.7" | 2.3" | 0.7" | 3.4" | 1.6" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
| 4 Small | 0.83" | 0.83" | __ | __ | 2.9" | 2.3" | 0.7" | 1.8" | 1.8" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| 4 Small | 0.83" | 0.83" | __ | __ | 4.7" | 2.3" | 0.7" | 3.5" | 0.8" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
| 5 Small | 0.83" | 0.83" | __ | __ | 5.8" | 2.3" | 0.7" | 4.4" | 0.8" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
| 6 Small / 1 Large | 0.83" | 0.83" | 1.63" | 1.63" | 5.8" | 2.3" | 0.7" | 4.4" | 1.6" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
| 6 Small | 0.83" | 0.83" | __ | __ | 3.9" | 2.3" | 0.7" | 2.6" | 1.4" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| 8 Small | 0.83" | 0.83" | __ | __ | 4.7" | 2.3" | 0.7" | 3.4" | 1.4" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| 10 Small | 0.83" | 0.83" | __ | __ | 5.8" | 2.3" | 0.7" | 4.4" | 1.4" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| 1 Large | __ | __ | 1.63" | 1.63" | 2.9" | 2.3" | 0.7" | 1.6" | 1.4" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
| 2 Large | __ | __ | 1.63" | 1.63" | 4.7" | 2.3" | 0.7" | 3.3" | 1.4" | No | 4 | 0.22" | -20° to 190° | Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 00000000 | 00000 |
Low-Profile Submersible Break-Through Multi-Cord Grips
For 3 Cords
For 4 Cords
For 7 Cords
For 8 cords
For 9 Cords
For 10 Cords
For 12 Cords
For 13 Cords
For 14 Cords
For 19 Cords
For 35 Cords
For 78 Cords
The face of these grips is flush with the cable-entry point for a seamless appearance. They have a thin, flexible seal that covers the holes until you push a cord through. Grips are rated IP66, IP68, NEMA 4X, and NEMA 12 for protection from continuous submersion, washdowns and oil/coolant splashing.
For technical drawings and 3-D models, click on a part number.
| Shape | For Cord OD (No. of Cords) | For Knockout Trade Size | Thread Type | For Max. Panel Thick. | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
For 3 Cords | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Straight | 0.13"-0.2" (2), 0.13"-0.25" (1) | M25 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 000000 |
For 4 Cords | |||||||||||
| Straight | 0.13"-0.2" | M25 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| Straight | 0.2"-0.37" | M32 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| Straight | 0.13"-0.26" (3), 0.28"-0.49" (1) | M32 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 7 Cords | |||||||||||
| Straight | 0.13"-0.25" | M32 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 8 Cords | |||||||||||
| Straight | 0.13"-0.25" (4), 0.2"-0.4" (4) | M40 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| Straight | 0.2"-0.4" (5), 0.28"-0.49" (3) | M50 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 9 Cords | |||||||||||
| Straight | 0.13"-0.25" (1), 0.2"-0.4" (3), 0.35"-0.64" (4), 0.63"-0.87" (1) | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 10 Cords | |||||||||||
| Straight | 0.13"-0.26" (7), 0.2"-0.4" (2), 0.63"-0.87" (1) | M50 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 12 Cords | |||||||||||
| Straight | 0.13"-0.25" (4), 0.2"-0.4" (8) | M50 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 13 Cords | |||||||||||
| Straight | 0.13"-0.25" (4), 0.2"-0.4" (4), 0.35"-0.64" (5) | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 14 Cords | |||||||||||
| Straight | 0.2"-0.4" | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 19 Cords | |||||||||||
| Straight | 0.13"-0.26" | M50 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 35 Cords | |||||||||||
| Straight | 0.13"-0.25" | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 78 Cords | |||||||||||
| Straight | 0.06"-0.1" (76), 0.1"-0.2" (2) | M50 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
Wet-Location Multi-Diameter Multi-Cord Grips
Modify these cord grips to get the right fit for your cord even when you don't know the exact diameter. They include a frame with two-piece rubber inserts that fit around cables with connectors. The inserts are made of layers that you peel away until you reach the size that fits your cord.
Grips are rated IP66 and IP67 for protection from washdowns and temporary water submersion and NEMA 4X and 13 for indoor and outdoor protection against corrosion, water projected from a hose, and oil/coolant spraying.
Nylon is chemical resistant.
Replacement inserts allow you to change cord sizes and configurations.
For technical drawings and 3-D models, click on a part number.
Black Nylon Plastic
For Panel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total No. of Cords | For Cord OD (No. of Cords) | Mounting Location | Lg. | Wd. | Dp. | Cutout Dia. | Cutout Lg. | Cutout Wd. | Temp. Range, ° F | Environmental Rating | Each | |
| 4 | 0.14"-0.65" | Surface | 3.8" | 2.8" | 1.2" | 2" | __ | __ | -75° to 140° | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
| 7 | 0.14"-0.65" (6), 0.37"-1.28" (1) | Surface | 6.6" | 2.8" | 1.2" | __ | 4.3" | 1.5" | -75° to 140° | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 00000 |
| 10 | 0.14"-0.65" (8), 0.37"-1.28" (2) | Surface | 9" | 3.5" | 1.3" | __ | 6.2" | 1.5" | -75° to 140° | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
| 10 | 0.14"-0.65" | Surface | 6.6" | 2.8" | 1.2" | __ | 4.3" | 1.5" | -75° to 140° | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
| 16 | 0.14"-0.65" | Surface | 9" | 3.5" | 1.3" | __ | 6.2" | 1.5" | -75° to 140° | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
Low-Profile Wet-Location Break-Through Multi-Cord Grips
For 13 Cords
For 17 Cords
For 25 Cords
The face of these grips is flush with the cable-entry point for a seamless appearance. They have a thin, flexible seal that covers the holes until you push a cord through. This design allows installation of additional cables without changing cord grips. They are rated NEMA 12 and IP66 to provide protection from dust,water jets, and splashing oil and coolant.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Total No. of Cords | For Cord OD (For No. of Cords) | Mounting Location | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Temp. Range, °F | Environmental Rating | Specifications Met | Each | |
| 13 | 0.13"-0.26" (8), 0.2"-0.4" (4), 0.63"-0.87" (1) | Surface | 1.8" | 1.8" | Gray Nylon Plastic | No | 4 | 0.22" | -40° to 190° | NEMA 12, IP66 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 000000 |
| 17 | 0.13"-0.26" (10), 0.2"-0.4" (4), 0.29"-0.47" (2), 0.35"-0.64" (1) | Surface | 1.8" | 1.8" | Gray Nylon Plastic | No | 4 | 0.22" | -40° to 190° | NEMA 12, IP66 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
| 25 | 0.13"-0.26" | Surface | 1.8" | 1.8" | Gray Nylon Plastic | No | 4 | 0.22" | -40° to 190° | NEMA 12, IP66 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |