Clear All
Width Width |
|---|
Cross Section Shape Cross Section Shape |
|---|
 | Round |
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Hardness Rating Hardness Rating |
|---|
|
ID ID |
|---|
For Use With For Use With |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
|
Dash Number Dash Number |
|---|
Minimum Temperature Minimum Temperature |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
OD OD |
|---|
|
Seal OD Seal OD |
|---|
Seal ID Seal ID |
|---|
For Shaft Diameter For Shaft Diameter |
|---|
|
Environment Environment |
|---|
About O-Rings
More
Close
About Cylinder Seals
Rod wipers scrape dirt, dust, and moisture from the rod, preventing contamination inside your cylinder.
Rod seals maintain the pressure inside cylinders and prevent fluid from leaking out.
Wear rings guide the rod and piston to prevent uneven wear and optimize seal performance.
Head seals are a more reliable alternative to the standard O-ring/backup ring combination—they resist twisting and remain stable even in applications with fluctuating pressure.
Buffering seals protect hydraulic cylinders from pressure spikes and shock in high-pressure hydraulic applications.
Cushioning seals minimize wear and noise in air-powered cylinders by preventing the piston from slamming against the cylinder body.
Piston seals make a seal between their outside edge and the cylinder bore to prevent internal leaks.
About Washers
More
Made-to-Order Chemical-Resistant Fluoroelastomer O-Rings
When you need a fluoroelastomer O-ring that’s not an industry standard size, we can make one to fit your requirements. Fluoroelastomer resists a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol. These O-rings have a round profile and are suitable for both static and dynamic sealing applications.
Inch
Wd. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Fractional | Actual | ID Range | Hardness | Specifications Met | Temperature Range, °F | Color | Pkg. Qty. | Pkg. | |
| 1/16 | 0.07" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 10 | 0000000 | 000000 |
| 3/32 | 0.103" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 10 | 0000000 | 00000 |
| 1/8 | 0.125" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 5 | 0000000 | 00000 |
| 1/8 | 0.139" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 5 | 0000000 | 00000 |
| 3/16 | 0.21" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 3 | 0000000 | 00000 |
| 1/4 | 0.25" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 2 | 0000000 | 00000 |
| 1/4 | 0.275" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 2 | 0000000 | 00000 |
| 5/16 | 0.312" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 2 | 0000000 | 00000 |
| 3/8 | 0.375" | 2 1/2" to 50" | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 1 | 0000000 | 00000 |
Metric
| Wd., mm | ID Range, mm | Hardness | Specifications Met | Temperature Range, °F | Color | Pkg. Qty. | Pkg. | |
| 1.6 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 10 | 0000000 | 000000 |
| 2 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 10 | 0000000 | 00000 |
| 2.5 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 10 | 0000000 | 00000 |
| 3 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 5 | 0000000 | 00000 |
| 3.5 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 5 | 0000000 | 00000 |
| 4 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 5 | 0000000 | 00000 |
| 4.5 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 5 | 0000000 | 00000 |
| 5 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 3 | 0000000 | 00000 |
| 5.7 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 3 | 00000000 | 00000 |
| 6 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 3 | 00000000 | 00000 |
| 8 | 63.5 to 1,300 | Durometer 75A (Medium) | ASTM D2000 | -15° to 400° | Black | 2 | 00000000 | 00000 |
Chemical-Resistant Metal-Detectable Fluoroelastomer O-Rings
If these O-rings deteriorate they can be picked up by metal detection systems. Made of fluoroelastomer, they resist a wide range of chemicals, including citric and nitric acid. O-rings are sized to the SAE standard AS568. All have shelf life, cure date, and traceable lot number printed on the bag.
For technical drawings and 3-D models, click on a part number.
Fractional | Actual | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dash Number | ID | OD | ID | OD | Hardness | Specifications Met | Temperature Range, °F | Color | Pkg. Qty. | Pkg. | |
Wd.: 1/16 Fractional (0.06" Actual) | |||||||||||
| 003 | 1/16 | 3/16 | 0.056" | 0.176" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
Wd.: 1/16 Fractional (0.07" Actual) | |||||||||||
| 004 | 5/64 | 13/64 | 0.07" | 0.21" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 005 | 3/32 | 7/32 | 0.101" | 0.241" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 006 | 1/8 | 1/4 | 0.114" | 0.254" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 007 | 5/32 | 9/32 | 0.145" | 0.285" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 008 | 3/16 | 5/16 | 0.176" | 0.316" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 009 | 7/32 | 11/32 | 0.208" | 0.348" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 010 | 1/4 | 3/8 | 0.239" | 0.379" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 011 | 5/16 | 7/16 | 0.301" | 0.441" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 012 | 3/8 | 1/2 | 0.364" | 0.504" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 013 | 7/16 | 9/16 | 0.426" | 0.566" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 014 | 1/2 | 5/8 | 0.489" | 0.629" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 015 | 9/16 | 11/16 | 0.551" | 0.691" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 016 | 5/8 | 3/4 | 0.614" | 0.754" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 017 | 11/16 | 13/16 | 0.676" | 0.816" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 018 | 3/4 | 7/8 | 0.739" | 0.879" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 019 | 13/16 | 15/16 | 0.801" | 0.941" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 020 | 7/8 | 1 | 0.864" | 1.004" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 021 | 15/16 | 1 1/16 | 0.926" | 1.066" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 024 | 1 1/8 | 1 1/4 | 1.114" | 1.254" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 026 | 1 1/4 | 1 3/8 | 1.239" | 1.379" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 028 | 1 3/8 | 1 1/2 | 1.364" | 1.504" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 029 | 1 1/2 | 1 5/8 | 1.489" | 1.629" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 030 | 1 5/8 | 1 3/4 | 1.614" | 1.754" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 031 | 1 3/4 | 1 7/8 | 1.739" | 1.879" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 0000 |
| 034 | 2 1/8 | 2 1/4 | 2.114" | 2.254" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 038 | 2 5/8 | 2 3/4 | 2.614" | 2.754" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 0000 |
Wd.: 3/32 Fractional (0.103" Actual) | |||||||||||
| 108 | 1/4 | 7/16 | 0.237" | 0.443" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 109 | 5/16 | 1/2 | 0.299" | 0.505" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 110 | 3/8 | 9/16 | 0.362" | 0.568" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 10 | 0000000 | 0000 |
| 111 | 7/16 | 5/8 | 0.424" | 0.63" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 112 | 1/2 | 11/16 | 0.487" | 0.693" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 113 | 9/16 | 3/4 | 0.549" | 0.755" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 114 | 5/8 | 13/16 | 0.612" | 0.818" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 115 | 11/16 | 7/8 | 0.674" | 0.88" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 116 | 3/4 | 15/16 | 0.737" | 0.943" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 117 | 13/16 | 1 | 0.799" | 1.005" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 118 | 7/8 | 1 1/16 | 0.862" | 1.068" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 119 | 15/16 | 1 1/8 | 0.924" | 1.13" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 127 | 1 7/16 | 1 5/8 | 1.424" | 1.63" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 131 | 1 11/16 | 1 7/8 | 1.674" | 1.88" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 132 | 1 3/4 | 1 15/16 | 1.737" | 1.943" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 133 | 1 13/16 | 2 | 1.799" | 2.005" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 0000 |
| 139 | 2 3/16 | 2 3/8 | 2.175" | 2.381" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 144 | 2 1/2 | 2 11/16 | 2.487" | 2.693" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 154 | 3 3/4 | 3 15/16 | 3.737" | 3.943" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 157 | 4 1/2 | 4 11/16 | 4.487" | 4.693" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
Wd.: 1/8 Fractional (0.139" Actual) | |||||||||||
| 204 | 3/8 | 5/8 | 0.359" | 0.637" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 205 | 7/16 | 11/16 | 0.421" | 0.699" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 0000 |
| 206 | 1/2 | 3/4 | 0.484" | 0.762" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 5 | 0000000 | 00000 |
| 208 | 5/8 | 7/8 | 0.609" | 0.887" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 210 | 3/4 | 1 | 0.734" | 1.012" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 211 | 13/16 | 1 1/16 | 0.796" | 1.074" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 212 | 7/8 | 1 1/8 | 0.859" | 1.137" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 214 | 1 | 1 1/4 | 0.984" | 1.262" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 215 | 1 1/16 | 1 5/16 | 1.046" | 1.324" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 216 | 1 1/8 | 1 3/8 | 1.109" | 1.387" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 218 | 1 1/4 | 1 1/2 | 1.234" | 1.512" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 222 | 1 1/2 | 1 3/4 | 1.484" | 1.762" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 223 | 1 5/8 | 1 7/8 | 1.609" | 1.887" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 224 | 1 3/4 | 2 | 1.734" | 2.012" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 2 | 0000000 | 00000 |
| 226 | 2 | 2 1/4 | 1.984" | 2.262" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 228 | 2 1/4 | 2 1/2 | 2.234" | 2.512" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 229 | 2 3/8 | 2 5/8 | 2.359" | 2.637" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 230 | 2 1/2 | 2 3/4 | 2.484" | 2.762" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 232 | 2 3/4 | 3 | 2.734" | 3.012" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 235 | 3 1/8 | 3 3/8 | 3.109" | 3.387" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 253 | 5 3/8 | 5 5/8 | 5.359" | 5.637" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 257 | 5 7/8 | 6 1/8 | 5.859" | 6.137" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 259 | 6 1/4 | 6 1/2 | 6.234" | 6.512" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 261 | 6 3/4 | 7 | 6.734" | 7.012" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 0000 |
| 267 | 8 1/4 | 8 1/2 | 8.234" | 8.512" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 268 | 8 1/2 | 8 3/4 | 8.484" | 8.762" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
| 270 | 9 | 9 1/4 | 8.984" | 9.262" | Durometer 75A (Medium) | ASTM D2000, FDA Compliant 21 CFR 177.2600, SAE AS568, SAE J200 | -15° to 400° | Blue/Gray | 1 | 0000000 | 00000 |
Chemical-Resistant Fluoroelastomer O-Ring Cord Stock
This fluoroelastomer cord stock resists benzene, boric acid, ethylene glycol, and isopropyl alcohol. Use it to make round-profile O-rings, which are suitable for a wide range of static and dynamic sealing applications.
For technical drawings and 3-D models, click on a part number.
Inch
Wd. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Fractional | Actual | Hardness | Specifications Met | Temperature Range, °F | Color | Lengths, ft. | Per Ft. | |
| 1/16 | 0.07" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 00000 | |
| 3/32 | 0.103" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 0000 | |
| 1/8 | 0.139" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 0000 | |
| 3/16 | 0.21" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 0000 | |
| 1/4 | 0.275" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 0000 | |
| 5/16 | 0.313" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 0000 | |
| 3/8 | 0.375" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 00000 | |
| 7/16 | 0.437" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 00000 | |
| 1/2 | 0.5" | Durometer 75A (Medium) | ASTM D2000 | 5° to 395° | Black | 00000000 | 00000 | |
Chemical-Resistant Soft Fluoroelastomer O-Ring Cord Stock
This cord stock is softer and creates a better seal than standard fluoroelastomer cord stock. It resists benzene, boric acid, ethylene glycol, and isopropyl alcohol. Use it to make round-profile O-rings, which are suitable for a wide range of static and dynamic sealing applications.
For technical drawings and 3-D models, click on a part number.
Wd. | ||||||||
|---|---|---|---|---|---|---|---|---|
| Fractional | Actual | Hardness | Specifications Met | Temperature Range, °F | Color | Lengths, ft. | Per Ft. | |
| 1/16 | 0.07" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 00000 | |
| 3/32 | 0.103" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 0000 | |
| 1/8 | 0.139" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 0000 | |
| 3/16 | 0.21" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 0000 | |
| 1/4 | 0.275" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 0000 | |
| 5/16 | 0.313" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 0000 | |
| 3/8 | 0.375" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 00000 | |
| 7/16 | 0.437" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 00000 | |
| 1/2 | 0.5" | Durometer 55A (Soft) | ASTM D2000 | 5° to 395° | Black | 0000000 | 00000 | |
O-Ring Bonding Kits
These kits include everything you need to make your own O-rings, including cord stock, a splicing jig, adhesive, and a razor blade.
Fluoroelastomer cord stock resists boric acid, fuels, and transmission fluid.
Relacement jigs splice cord stock from 0.103” to 0.375” Wd.
Rod Wipers
Side 1
Side 2
Also known as U-type wipers, these have a single lip that scrapes dirt, dust, and moisture from the rod, preventing contamination inside the cylinder.
Wipers that meet MS28776 fit dash size grooves specified by the standard.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
MS28776 Wipers
Profile
For Groove | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rod Dia. | Dia. | Shoulder Dia. | Wd. | Wd. | O'all Wd. | Max. Speed, ft./sec. | Temp. Range, °F | Hardness | Color | Specifications Met | Each | |
Fluoroelastomer Rubber | ||||||||||||
| 1/2" | 0.760" | 0.647" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-1 | 0000000 | 000000 |
| 5/8" | 0.885" | 0.772" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-3 | 0000000 | 00000 |
| 3/4" | 1.010" | 0.897" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-5 | 0000000 | 00000 |
| 7/8" | 1.147" | 1.023" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-7 | 0000000 | 00000 |
| 1" | 1.272" | 1.148" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-9 | 0000000 | 00000 |
| 1 1/8" | 1.397" | 1.273" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-11 | 0000000 | 00000 |
| 1 1/4" | 1.522" | 1.398" | 0.107" | 0.099" | 0.187" | 3.3 | -5° to 400° | Durometer 90A (Extra Hard) | Black | MS28776-13 | 0000000 | 00000 |
Heavy Duty Shaft-Mounted Rotary Seals
Side 1
Side 2
Profile
These seals are fluoroelastomer, so they have excellent chemical resistance and withstand temperatures up to 390° F. Also known as V-rings and flingers, they protect shaft bearings by blocking dust and other contaminants while retaining lubricant. To install, stretch the seal over your shaft and press it firmly against the face plate.
Note: Maximum performance values cannot be achieved simultaneously; for example, speed is affected by pressure, temperature, and other operating conditions.
For technical drawings and 3-D models, click on a part number.
For Shaft | Seal | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Dia. Range | For Face Plate Dia. | ID | OD | Wd. | Max. Speed, rpm | Max. Pressure, psi | Temp. Range, °F | Hardness | Color | Each | |
Fluoroelastomer Rubber | ||||||||||||
| 1/4" | 0.217"-0.256" | 0.453"-0.492" | 0.197" | 0.354" | 0.146" | 30,600 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 3/8" | 0.374"-0.453" | 0.728"-0.807" | 0.354" | 0.591" | 0.217" | 17,000 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 1/2" | 0.453"-0.492" | 0.807"-0.846" | 0.413" | 0.650" | 0.217" | 14,600 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 5/8" | 0.610"-0.689" | 0.965"-1.043" | 0.551" | 0.787" | 0.217" | 10,900 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 3/4" | 0.748"-0.827" | 1.220"-1.299" | 0.709" | 1.024" | 0.295" | 8,500 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 7/8" | 0.827"-0.945" | 1.299"-1.417" | 0.787" | 1.102" | 0.295" | 7,600 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 1 1/2", 1 5/8" | 1.496"-1.693" | 2.087"-2.283" | 1.417" | 1.811" | 0.354" | 4,200 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 1 3/4", 1 7/8" | 1.693"-1.89" | 2.283"-2.480" | 1.575" | 1.969" | 0.354" | 3,800 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 1" | 0.945"-1.063" | 1.417"-1.535" | 0.866" | 1.181" | 0.295" | 6,900 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 1 1/8" | 1.063"-1.142" | 1.535"-1.614" | 0.984" | 1.299" | 0.295" | 6,100 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 1 1/4" | 1.220"-1.299" | 1.693"-1.772" | 1.142" | 1.457" | 0.295" | 5,300 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 1 3/8" | 1.299"-1.417" | 1.772"-1.890" | 1.220" | 1.535" | 0.295" | 4,900 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 0000 |
| 2 3/4", 2 7/8" | 2.677"-2.874" | 3.386"-3.583" | 2.480" | 2.953" | 0.433" | 2,400 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 2 1/8", 2 1/4" | 2.087"-2.283" | 2.677"-2.874" | 1.929" | 2.323" | 0.354" | 3,100 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 2" | 1.890"-2.087" | 2.480"-2.677" | 1.772" | 2.165" | 0.354" | 3,400 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 2 1/2", 2 5/8" | 2.480"-2.677" | 3.071"-3.268" | 2.283" | 2.677" | 0.354" | 2,600 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 2 3/8" | 2.283"-2.48" | 2.874"-3.071" | 2.126" | 2.520" | 0.354" | 2,800 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 3" | 2.874"-3.071" | 3.583"-3.780" | 2.638" | 3.110" | 0.433" | 2,300 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 3 1/4" | 3.071"-3.268" | 3.780"-3.976" | 2.835" | 3.307" | 0.433" | 2,100 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 3 1/2" | 3.465"-3.661" | 4.173"-4.370" | 3.189" | 3.661" | 0.433" | 1,900 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 3 3/4" | 3.661"-3.858" | 4.370"-4.567" | 3.346" | 3.819" | 0.433" | 1,800 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
| 4" | 3.858"-4.134" | 4.567"-4.843" | 3.543" | 4.016" | 0.433" | 1,700 | 5 | 5° to 390° | Durometer 60A (Medium) | Brown | 0000000 | 00000 |
Oil-Resistant Rubber Sealing Washers
These washers surpass other rubber washers when it comes to withstanding oil, grease, and fuel. They create a light duty seal around fasteners to prevent fluids from leaking and damp vibration.
Viton® fluoroelastomer and fluoroelastomer washers withstand oil, chemicals, and high temperatures better than neoprene washers.
FDA-compliant washers are safe for direct contact with food.
For technical drawings and 3-D models, click on a part number.
Temperature Range, °F | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | ID | OD | Thick. | Min. | Max. | Hardness | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Fluoroelastomer Rubber | |||||||||||
| No. 6 | 0.120" | 0.250" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 6 | 0.120" | 0.375" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 8 | 0.150" | 0.313" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 8 | 0.150" | 0.438" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 10 | 0.170" | 0.375" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 10 | 0.170" | 0.500" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 12 | 0.195" | 0.438" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 12 | 0.195" | 0.563" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 14 | 0.230" | 0.500" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| No. 14 | 0.230" | 0.625" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| 5/16" | 0.290" | 0.563" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| 5/16" | 0.290" | 0.688" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| 3/8" | 0.355" | 0.625" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 25 | 000000000 | 00000 |
| 3/8" | 0.355" | 0.813" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 10 | 000000000 | 0000 |
| 1/2" | 0.490" | 1.063" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 10 | 000000000 | 00000 |
| 3/4" | 0.740" | 1.500" | 0.062" | -20° | 450° | Durometer 70A | Black | FDA Compliant 21 CFR 177.2600 | 10 | 000000000 | 00000 |