Search Results
Clear All
Temper Temper | Show |
|---|
|
Temper Temper | Hide |
|---|
System of Measurement System of Measurement |
|---|
|
Thickness Thickness |
|---|
Length Length |
|---|
Shape Shape |
|---|
 |  |
| Sheet and Bar | Round Tube |
 |  |
| Foil | Wire |
 | |
| Ball |
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
Hardness Hardness |
|---|
|
|
Heat Treatment Heat Treatment |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Yield Strength Yield Strength |
|---|
|
Certificate Certificate |
|---|
 | |
Minimum Temperature Minimum Temperature |
|---|
|
Fabrication Fabrication |
|---|
|
|
Temper Rating Temper Rating |
|---|
|
Specifications Met Specifications Met |
|---|
|
Diameter Diameter |
|---|
|
|
|
Mechanical Finish Mechanical Finish |
|---|
|
About Aluminum
More
Multipurpose 6061 Aluminum Sheets and Bars
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Cold-rolled foil and sheets are cut from large pieces to the widths and lengths listed, so the edges may not be parallel.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Foil
- Yield Strength: 6,600 psi
- Hardness: Brinell 30 (Soft)
- Temper: O
- Fabrication: See table
- Specifications Met: SAE AMS4027
| Thick. | Thick. Tolerance | Fabrication | Heat Treatment | Temperature Range, °F | Each | |
6" × 25ft. | ||||||
|---|---|---|---|---|---|---|
| 0.010" | -0.001" to 0.001" | Cold Rolled | Annealed (Softened) | -320° to 300° | 000000 | 0000000 |
| 0.012" | -0.001" to 0.001" | Cold Rolled | Annealed (Softened) | -320° to 300° | 000000 | 000000 |
12" × 25ft. | ||||||
| 0.010" | -0.001" to 0.001" | Cold Rolled | Annealed (Softened) | -320° to 300° | 000000 | 000000 |
| 0.012" | -0.001" to 0.001" | Cold Rolled | Annealed (Softened) | -320° to 300° | 000000 | 000000 |
Easy-to-Weld 5052 Aluminum Tubes
- Yield Strength: 10,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Specifications Met: ASTM B210
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| OD | OD Tolerance | ID | ID Tolerance | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.035" Wall Thick. (-0.002" to 0.002" Tolerance) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | -0.004" to 0.004" | 0.180" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.305" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.680" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.930" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.049" Wall Thick. (-0.003" to 0.003" Tolerance) | ||||||||||
| 1/4" | -0.004" to 0.004" | 0.152" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.500" per ft. | 0000000 | |||
| 3/8" | -0.004" to 0.004" | 0.277" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1/2" | -0.004" to 0.004" | 0.402" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 3/4" | -0.004" to 0.004" | 0.652" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.902" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
0.065" Wall Thick. (-0.004" to 0.004" Tolerance) | ||||||||||
| 1/2" | -0.004" to 0.004" | 0.370" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 5/8" | -0.004" to 0.004" | 0.495" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
| 1" | -0.004" to 0.004" | 0.870" | -0.004" to0.004" | Annealed (Softened) | -300° to 300° | 0.010" per ft. | 0000000 | |||
Corrosion-Resistant 3003 Aluminum Sheets and Bars
3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
PTFE-coated foil has a green PTFE coating on one side, which is slippery and allows it to be used as a release liner in manufacturing processes.
Foil
- Yield Strength:
.003" to .010" Thick.: Not Rated
All other sizes: 21,000 psi - Hardness:
.003" to .010" Thick.: Brinell 25 (Soft)
All other sizes: Not Rated - Temper:
.003" to .010" Thick.: O (Annealed)
.012" Thick.: H22 (1/4 Hard)
.016" Thick.: H14 (1/2 Hard) - Fabrication: Cold Rolled
- Specifications Met:
.006" to .016" Thick.: ASTM B209
| Thick. | Thick. Tolerance | Wd. | Lg. | Heat Treatment | Temperature Range, °F | Each | |
| 0.003" | -0.0003" to 0.0003" | 6" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 000000 |
| 0.003" | -0.0003" to 0.0003" | 12" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 00000 |
| 0.003" | -0.0003" to 0.0003" | 36" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 000000 |
| 0.006" | -0.0006" to 0.0006" | 6" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 00000 |
| 0.006" | -0.0006" to 0.0006" | 12" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 00000 |
| 0.010" | -0.001" to 0.001" | 6" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 00000 |
| 0.010" | -0.001" to 0.001" | 12" | 50 ft. | Annealed (Softened) | Not Rated | 0000000 | 000000 |
PTFE-Coated Foil
- Yield Strength: 5,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Fabrication: Cold Rolled
Hollow Corrosion-Resistant 3003 Aluminum Balls
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: O (Annealed)
- Fabrication: Cold Rolled
Hollow construction reduces weight and allows these balls to float. They’re widely used in bearings and valves. 3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability.
For technical drawings and 3-D models, click on a part number.
| Dia. | Dia. Tolerance | Heat Treatment | Temperature Range, °F | Pkg. Qty. | Pkg. | |
| 1/4" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 00000 |
| 5/16" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 0000 |
| 3/8" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 0000 |
| 7/16" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 0000 |
| 1/2" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 0000 |
| 9/16" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 00000 |
| 5/8" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 00000 |
| 3/4" | -0.010" to 0.010" | Annealed (Softened) | -300° to 300° | 10 | 0000000 | 00000 |
Easy-to-Form Pure Aluminum Sheets and Bars
Made of 1100-series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required. These temper O foil, sheets, and bars are annealed to the softest state possible, which is sometimes called “dead soft.” The foil is often used as a wrap, cover, mask, or patch; the black foil eliminates reflections.
Foil
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: See table
Each
| Thick. | Thick. Tolerance | Wd. | Lg. | Fabrication | Heat Treatment | Temperature Range, °F | Each | |
| 0.0007" | -0.0001" to 0.0001" | 12" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0007" | -0.0001" to 0.0001" | 12" | 1,000ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0007" | -0.0001" to 0.0001" | 18" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0007" | -0.0001" to 0.0001" | 18" | 1,000ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0010" | -0.0001" to 0.0001" | 6" | 100ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 12" | 100ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 12" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 12" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 100ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0010" | -0.0001" to 0.0001" | 18" | 1,000ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0015" | -0.0002" to 0.0002" | 6" | 250ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0015" | -0.0002" to 0.0002" | 6" | 500ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0015" | -0.0002" to 0.0002" | 8" | 250ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0015" | -0.0002" to 0.0002" | 8" | 500ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0020" | -0.0002" to 0.0002" | 6" | 100ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0020" | -0.0002" to 0.0002" | 12" | 100ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0020" | -0.0002" to 0.0002" | 12" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0020" | -0.0002" to 0.0002" | 18" | 100ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0020" | -0.0002" to 0.0002" | 18" | 250ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0020" | -0.0002" to 0.0002" | 18" | 500ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0030" | -0.0003" to 0.0003" | 12" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0030" | -0.0003" to 0.0003" | 36" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0030" | -0.0003" to 0.0003" | 36" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0030" | -0.0003" to 0.0003" | 48" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0030" | -0.0003" to 0.0003" | 48" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 6" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0050" | -0.0005" to 0.0005" | 12" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0050" | -0.0005" to 0.0005" | 24" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 36" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 36" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 48" | 50ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0050" | -0.0005" to 0.0005" | 48" | 100ft. | Cold Rolled | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
| 0.0100" | -0.001" to 0.001" | 6" | 50ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0100" | -0.001" to 0.001" | 12" | 50ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 00000 |
| 0.0100" | -0.001" to 0.001" | 24" | 50ft. | Cast | Annealed (Softened) | -20° to 300° | 0000000 | 000000 |
Adhesive-Back Foil
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Rolled
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Adhesive Type | Each | |
6" × 100 ft. | ||||||
|---|---|---|---|---|---|---|
| 0.0020" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 0000000 |
6" × 180 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
| 0.0040" | -0.0004" to 0.0004" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
18" × 50 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
18" × 180 ft. | ||||||
| 0.0015" | -0.0002" to 0.0002" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
| 0.0040" | -0.0004" to 0.0004" | Annealed (Softened) | -20° to 300° | Acrylic | 0000000 | 000000 |
Powder-Coated Foil
- Yield Strength: 2,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Extruded
Sheets
- Yield Strength: 3,500 psi
- Hardness: Brinell 20 (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B209
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | 2" × 24" | 4" × 24" | 6” × 6” | 6" × 12" | 6" × 24" | 12” × 12” | 12” × 24” | 24” × 24” | 24” × 48” | |
| 0.0200" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0320" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0400" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0500" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0630" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0800" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 0.0900" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 | |||||||||
| 1/8" | -0.0045" to 0.0045" | Annealed (Softened) | -200° to 300° | 0000000 |
Easy-to-Form 1100 Aluminum Wire
Spool
Coil
1-ft. Length
- Yield Strength: 3,500 psi
- Hardness: Not Rated (Soft)
- Temper: O (Annealed)
- Fabrication: Cold Drawn
- Specifications Met: ASTM B211
This wire has a soft temper and will stay in place when bent. Use it as tie wire and for bundling. Because 1100 aluminum is 99% pure, it offers superior formability, corrosion resistance, and electrical conductivity.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | Lg., ft. | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi | Weight, lb. | Container Type | Each | |
| 0.013" | -0.001" to 0.001" | 1,735 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 000000 |
| 0.013" | -0.001" to 0.001" | 6,940 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.013" | -0.001" to 0.001" | 34,700 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
| 0.016" | -0.001" to 0.001" | 1,085 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.016" | -0.001" to 0.001" | 4,355 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.016" | -0.001" to 0.001" | 21,790 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
| 0.020" | -0.001" to 0.001" | 680 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.020" | -0.001" to 0.001" | 2,725 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.020" | -0.001" to 0.001" | 13,635 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 000000 |
| 0.025" | -0.001" to 0.001" | 430 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.025" | -0.001" to 0.001" | 1,720 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.025" | -0.001" to 0.001" | 8,605 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.032" | -0.001" to 0.001" | 265 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.032" | -0.001" to 0.001" | 1,075 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.032" | -0.001" to 0.001" | 5,380 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.040" | -0.002" to 0.002" | 165 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.040" | -0.002" to 0.002" | 675 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.040" | -0.002" to 0.002" | 3,390 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.051" | -0.002" to 0.002" | 105 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.051" | -0.002" to 0.002" | 425 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.051" | -0.002" to 0.002" | 2,130 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.064" | -0.002" to 0.002" | 67 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 0000 |
| 0.064" | -0.002" to 0.002" | 265 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.064" | -0.002" to 0.002" | 1,340 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.080" | -0.002" to 0.002" | 2,025 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 000000 |
| 0.081" | -0.002" to 0.002" | 42 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 00000 |
| 0.081" | -0.002" to 0.002" | 165 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.081" | -0.002" to 0.002" | 840 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.114" | -0.002" to 0.002" | 21 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 0000 |
| 0.114" | -0.002" to 0.002" | 84 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.114" | -0.002" to 0.002" | 420 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
| 0.114" | -0.002" to 0.002" | 1,010 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 000000 |
| 0.125" | -0.002" to 0.002" | 830 | Annealed (Softened) | 200° | 11,000 | 12 | Coil | 0000000 | 000000 |
| 0.126" | -0.002" to 0.002" | 17 | Annealed (Softened) | 200° | 11,000 | 1/4 | Spool | 0000000 | 0000 |
| 0.126" | -0.002" to 0.002" | 69 | Annealed (Softened) | 200° | 11,000 | 1 | Spool | 0000000 | 00000 |
| 0.126" | -0.002" to 0.002" | 330 | Annealed (Softened) | 200° | 11,000 | 5 | Spool | 0000000 | 00000 |
1 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Max. Temperature, °F | Tensile Strength, psi | Pkg. Qty. | Pkg. | |
| 0.013" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 00000 |
| 0.016" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 0000 |
| 0.020" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 0000 |
| 0.025" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 25 | 0000000 | 00000 |
| 0.032" | -0.001" to 0.001" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
| 0.040" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
| 0.051" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
| 0.064" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
| 0.081" | -0.002" to 0.002" | Annealed (Softened) | 200° | 11,000 | 10 | 0000000 | 0000 |
Contaminant-Free High-Vacuum Aluminum Foil
- Yield Strength: 14,000 psi
- Hardness: Not Rated
- Temper: O (Annealed)
- Fabrication: Cold Rolled
- Specifications Met: ASTM B479, Fed. Spec. QQ-A-1876
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system. It is “A” wettable, so it's completely free of the oils found on other types aluminum foil. Supplied on a plastic core, it comes wrapped in plastic and packed in a plastic box to ensure it stays free of contaminants. Often called UHV (ultra-high vacuum) foil, it is 1100 aluminum, which is highly corrosion resistant and very formable.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Each | |
6" × 250 ft. | |||||
|---|---|---|---|---|---|
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 0000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
6" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
12" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
12" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
18" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
18" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
24" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
24" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 0000000 | 000000 |
36" × 250 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
36" × 500 ft. | |||||
| 0.0010" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0015" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
| 0.0020" | -0.00015" to 0.00015" | Annealed (Softened) | -380° to 750° | 00000000 | 000000 |
Easy-to-Machine Cast Aluminum for Tool and Jig Plates
- Yield Strength: 18,000 psi
- Hardness: Brinell 70 (Soft)
- Temper: O
- Fabrication: Cast
- Specifications Met: ASTM B209
Made of 5083 aluminum, these cast tool and jig plates are more corrosion resistant and respond better to anodizing than MIC6. This material is comparable to Alca 5 and ATP 5. Use for CNC routing tables, assembly jigs, vacuum chucks, and other applications where consistent flatness and tight tolerances are critical.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance | Heat Treatment | Temperature Range, °F | Flatness Tolerance | Each | |
6" × 6" | ||||||
|---|---|---|---|---|---|---|
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 0000000 | 000000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 0000000 | 00000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
6" × 12" | ||||||
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 0000000 | 00000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 0000000 | 00000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
8" × 8" | ||||||
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 0000000 | 00000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 0000000 | 00000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 0000000 | 00000 |
12" × 12" | ||||||
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 00000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 00000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 00000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 00000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 00000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
12" × 24" | ||||||
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 00000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
18" × 18" | ||||||
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 00000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
24" × 24" | ||||||
| 1/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 3/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 1/2" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.015" | 00000000 | 000000 |
| 5/8" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
| 3/4" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
| 1" | -0.005" to 0.005" | Annealed (Softened) | -315° to 250° | 0.005" | 00000000 | 000000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)