This grease performs well in a wide range of bearing types.

Formulated to resist most chemicals and solvents, this grease keeps bearings lubricated in harsh environments.

For use in food-processing and preparation areas, this grease is rated for incidental contact with food.

Formulated to adhere to metal parts and stay in place in wet environments, this grease is commonly used in pulp and paper manufacturing and water management facilities.

For use in applications where acids, bases, oxidizers, and fuels are present.

Highly pure and with no additives to contaminate sensitive environments, use this grease in clean rooms and electronic assembly workstations.

Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals.

Highly pure, this grease is chemically inert, so it won’t contaminate sensitive environments or react with other substances. Due to its low vapor pressure, it resists evaporation, even at high temperatures.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

This thin lubricant penetrates into tight spaces, and nano-sized additives fill small surface imperfections, reducing wear and heat and extending the life of both the lubricant and equipment.

Formulated to handle high loads and temperatures, these multipurpose lubricants are NSF registered H1 for incidental food contact. Use them in high-pressure applications, such as gears, hinges, ovens, and dryers.

By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.

These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.

Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.

Easy to apply and mess-free, this tape won't run or rub off of threaded connections. Made with PTFE for excellent lubricity, it prevents threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.